Author

Topic: Antminer S1 Efficiency Question (Read 592 times)

hero member
Activity: 616
Merit: 500
May 31, 2014, 05:25:32 PM
#6
That's not what he asked. Usual terminology is W/GH, which is up to 1.2 or so if you downclock them loads.

Alrighty. I thought 393.95/470 = 0.84GH/W is what he was looking for.

The '393.95' in your reply is probably the clock speed in MHz, this is not the hash rate (which is about 200 GH/s for that clock speed).
So the efficiency is 470/200 W/(GH/s) which is 2.35 W/(GH/s), a rather poor value.
grn
sr. member
Activity: 357
Merit: 252
May 31, 2014, 03:36:31 PM
#5
1w/gh is possible
full member
Activity: 132
Merit: 100
May 31, 2014, 03:26:02 PM
#4
That's not what he asked. Usual terminology is W/GH, which is up to 1.2 or so if you downclock them loads.

Alrighty. I thought 393.95/470 = 0.84GH/W is what he was looking for.
legendary
Activity: 1666
Merit: 1183
dogiecoin.com
May 31, 2014, 01:38:43 PM
#3
That's not what he asked. Usual terminology is W/GH, which is up to 1.2 or so if you downclock them loads.
full member
Activity: 132
Merit: 100
May 31, 2014, 10:28:55 AM
#2
From the mining rig showoff thread

Unit is overclocked to 393.75 and with the cheapie power supplies, draws just a little over 470W when hot.  Draws 460W when cool.
hero member
Activity: 711
Merit: 500
May 31, 2014, 10:17:22 AM
#1
Quick question and I will lock / close this, didn't see it anywhere

What is the highest GH/Watt that the S1 can do? Total GH and Power Consumption?
Jump to: