Just to add .. both blades have Antminer V1.5 2013/12/16 printed on them..
and then printed where you plug in the network cable is - V1.2 2013/12/4
I really hope someone can help - I do not suspect the boards to be faulty as they were working fine prior to the firmware upgrade .. I am hoping that maybe the firmware needs rolling back to an older version ?
Cheers.
Topic: Antminer S1 - Fault after Firmware Upgrade (Read 744 times)
Hi All,
I have had the Antminer S1 for quite some time now, and thought I would upgrade the firmware ..
Upgraded to the latest release from Bitmains website:
https://bitmaintech.com/support.htm
antMiner_openwrt20140207.bin
Everything appeared to go smooth..
But now, on my mining status page I only see 1 "chain" and only one light on board with the lan connetion etc ..
There is no lights on the other board ...
Does anyone know what the problem is or how I can find out the problem ?
Wishing I didnt upgrade the firmware right now ... if it isnt broke .. dont fix it !!
Any help appreciated.
Cheers.
I have had the Antminer S1 for quite some time now, and thought I would upgrade the firmware ..
Upgraded to the latest release from Bitmains website:
https://bitmaintech.com/support.htm
antMiner_openwrt20140207.bin
Everything appeared to go smooth..
But now, on my mining status page I only see 1 "chain" and only one light on board with the lan connetion etc ..
There is no lights on the other board ...
Does anyone know what the problem is or how I can find out the problem ?
Wishing I didnt upgrade the firmware right now ... if it isnt broke .. dont fix it !!
Any help appreciated.
Cheers.
Jump to: