Antminer S1 Hash rate 90? | Bitcointalksearch.org

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

try 325 clock for a day.

see what you get.

then try 375 clock for a hour or 2 see what you get.

check it a lot

I had one that was a bit weird eventually I found it ran well at 375 freq.

I had another that likes 387.

I had 20 that all like 393.

Can't hurt to play with the freq as long as you look at them alot when testing

Cubano

newbie

Activity: 2

Merit: 0

I did a reboot on all 4 miners it did go up a bit but still not hashing like the rest. I don't know if I want to oc that one if there is something wrong with it. The first time I started it up hw went to 700 in 5 mins a reboot.

BAD
https://i.imgur.com/w2qipy6.png

GOOD
https://i.imgur.com/JPXIiVH.png

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

I see a lack of caps just not sure if they are missing or if the board was redesigned. If they are missing it could affect the hash.
I do see the single cap has a higher value then the double caps do.

you could try changing the freq and the hash rate what is the frequency set to?

could you screen shot the gui?

look at this one

look at it after a boot

Cubano

newbie

Activity: 2

Merit: 0

Hello I recently purchased 4 Antminer S1's 3 were made 2014/1/4 and one was made 2013/12/16. 3/4 Are running just fine except the 2013 it seem's to be hashing around 90 to 125 gh tops firmware is up to date stock 350 mhz and I have 2 running on each Corsair RM850.

My first question is are there any differences between the 2013 and 2014? It seems to be missing a few thing's but I could be wrong.

http://i59.tinypic.com/xbefis.jpg

http://i59.tinypic.com/21mvkau.jpg

My 2nd question is if there isn't anything missing any idea what could cause the loss in hash rate?

Topic: Antminer S1 Hash rate 90? (Read 728 times)