Antminer S1 overclocking | Bitcointalksearch.org

allcoinminer

hero member

Activity: 784

Merit: 504

Quote from: crazyates on March 14, 2014, 10:36:27 PM

We're running all of our Ants at 393mhz, which brings them just over 200GH/s. We slid the blue/yellow pins out of the back fan, so it's running @ 100%. Then we added a second fan up front, which is also running @ 100%. Temps are in the high 30s on almost all of our Ants, with some in the low 40s.

Haven't had any issues to date.

Its 393Mhz or 393.75Mhz ?
What's your chip timeout and hex?

rausvi15

hero member

Activity: 806

Merit: 507

Trusted Campaign manager

enyone try to overclock more than 400Mhz ?? what happend if speed up to 500Mhz ??

crazyates

legendary

Activity: 952

Merit: 1000

Quote from: Mortimer452 on March 14, 2014, 11:26:16 PM

Quote from: crazyates on March 14, 2014, 10:36:27 PM

We're running all of our Ants at 393mhz, which brings them just over 200GH/s. We slid the blue/yellow pins out of the back fan, so it's running @ 100%. Then we added a second fan up front, which is also running @ 100%. Temps are in the high 30s on almost all of our Ants, with some in the low 40s.

Haven't had any issues to date.

That's very good to know, thanks! Do you know about how many watts each unit is pulling at 393Mhz? I have a 1200W PSU running two S1's right now, not sure if it will handle a 3rd if overclocked.

Measuring one on a 80PlusGold PSU with a Kill-a-Watt, it's ~465W.

When we put 8 of them on a 208v 92% server PSU, they pull right around 16.5A for 8 of them (measured from the PDU).

16.5*208=3432/8=429*0.92=395

So 429W from the wall, and 395W from the PSU.

CCG

newbie

Activity: 16

Merit: 0

Overclocking should push your S1 up to about 5 amps. We run 4 S1's on a 20Amp Breaker and use ( Cool

550w 25a power supply for stability. We overclock 1 miner in this configure to stay just under the amps needed to pop the breaker.

Mortimer452

hero member

Activity: 532

Merit: 500

Quote from: crazyates on March 14, 2014, 10:36:27 PM

We're running all of our Ants at 393mhz, which brings them just over 200GH/s. We slid the blue/yellow pins out of the back fan, so it's running @ 100%. Then we added a second fan up front, which is also running @ 100%. Temps are in the high 30s on almost all of our Ants, with some in the low 40s.

Haven't had any issues to date.

That's very good to know, thanks! Do you know about how many watts each unit is pulling at 393Mhz? I have a 1200W PSU running two S1's right now, not sure if it will handle a 3rd if overclocked.

crazyates

legendary

Activity: 952

Merit: 1000

We're running all of our Ants at 393mhz, which brings them just over 200GH/s. We slid the blue/yellow pins out of the back fan, so it's running @ 100%. Then we added a second fan up front, which is also running @ 100%. Temps are in the high 30s on almost all of our Ants, with some in the low 40s.

Haven't had any issues to date.

Mortimer452

hero member

Activity: 532

Merit: 500

I know how to overclock the Antminer S1, just looking for some folks to chime in with "real-world" experience.

How stable is the overclocked Antminer S1? I've heard plenty of folks say they were able to get 200GH or maybe more, but never hear back from them in terms of how well it worked longer-term or whether they ended up toasting their antminer after running overclocked for 2 weeks.

I'm very tempted to do this for 10-15% hash increase, but don't want to burn up my Ants.

Topic: Antminer S1 overclocking (Read 1916 times)