Author

Topic: Antminer S1 - problem (Read 4174 times)

newbie
Activity: 6
Merit: 0
April 03, 2014, 07:03:11 AM
#5
I would suggest a hard reset by pushing the button shown here:

Then follow the directions in this video here:

https://www.youtube.com/watch?v=akw9GAeIH5k

Works for me...

Good luck Smiley

OK THX
I do hard reset and now everything working Smiley)
I have one more question. How is normal temperature to Antminer S1 on 180GH?
50C max if it's higher then something may be wrong.
I have 45C and fan 2340
sr. member
Activity: 434
Merit: 250
April 03, 2014, 06:48:05 AM
#4
I would suggest a hard reset by pushing the button shown here:

Then follow the directions in this video here:

https://www.youtube.com/watch?v=akw9GAeIH5k

Works for me...

Good luck Smiley

OK THX
I do hard reset and now everything working Smiley)
I have one more question. How is normal temperature to Antminer S1 on 180GH?
50C max if it's higher then something may be wrong.
newbie
Activity: 6
Merit: 0
April 03, 2014, 06:45:38 AM
#3
I would suggest a hard reset by pushing the button shown here:

Then follow the directions in this video here:

https://www.youtube.com/watch?v=akw9GAeIH5k

Works for me...

Good luck Smiley

OK THX
I do hard reset and now everything working Smiley)
I have one more question. How is normal temperature to Antminer S1 on 180GH?
legendary
Activity: 1258
Merit: 1027
April 02, 2014, 06:13:13 PM
#2
I would suggest a hard reset by pushing the button shown here:



Then follow the directions in this video here:

https://www.youtube.com/watch?v=akw9GAeIH5k

Works for me...

Good luck Smiley
newbie
Activity: 6
Merit: 0
April 02, 2014, 02:43:58 PM
#1
Hi
When I connect my Antminer S1 to the network lose Internet!!?, and all home network (when I scan the network I can see only my computer) Antminera I connect to the router (I'm waiting for the switch may this helps).
When I plug in the Antminer directly to PC (crossover Ethernet cables) I have access but by some 2 min later I must disconnect the cable and connect it again.
When I connect to the router does not have access to, and this happens as I wrote above.

Does anyone have any ideas what is wrong?

That looks like my IPconfig and set Antminer

IPconfig
http://s30.postimg.org/gl0lklpm9/ip_1.jpg

Antminer status:
http://s3.postimg.org/tj8n5ldf7/ant_1.jpg

LAN:
http://s18.postimg.org/8vo0bogyh/ant_lan.jpg

WAN:
http://s18.postimg.org/j70d4c8nt/ant_wan.jpg

I try change in WAN custorers DNS to: 192.168.0.1 but all the time is the same.
 Please help me!!
Jump to: