Antminer S1 Water Cooling | Bitcointalksearch.org

darrenyu

member

Activity: 71

Merit: 10

Quote from: kuusj98 on May 20, 2014, 10:59:33 AM

Quote from: Biffa on May 20, 2014, 10:17:50 AM

Quote from: steveo on May 20, 2014, 07:43:20 AM

This is interesting, I might need to order this to keep things cool in my house!

Only way you are going to do that is to put the radiator outside the house.

Water cooling doesn't remove the need to convert the energy into heat and then expel the heat into the ambient air.

Water cooling doesn't make your room cooler on its own.

Indeed, becouse water can take huge amounts of heat in itself doesn't mean it goes away, you only relocate the hot air, placing a rad outside is the only option to keep more heat out of the house.

Accept Order With Paypal
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8H499UVNMNCL6

darrenyu

member

Activity: 71

Merit: 10

Sir
We had put some video on Youtube.

Setup Video:

Step1
http://youtu.be/r2KHtzyLQt0

Step2
http://www.youtube.com/watch?v=L1XApaZbnIw

Step3
http://www.youtube.com/watch?v=1DMOFCnaUWE

Step4
http://youtu.be/8fA3Eh3GEmE

Connector Prepare:
https://www.youtube.com/watch?v=em4HZ7q_Bys

Quote from: kuusj98 on May 20, 2014, 10:59:33 AM

Quote from: Biffa on May 20, 2014, 10:17:50 AM

Quote from: steveo on May 20, 2014, 07:43:20 AM

This is interesting, I might need to order this to keep things cool in my house!

Only way you are going to do that is to put the radiator outside the house.

Water cooling doesn't remove the need to convert the energy into heat and then expel the heat into the ambient air.

Water cooling doesn't make your room cooler on its own.

Indeed, becouse water can take huge amounts of heat in itself doesn't mean it goes away, you only relocate the hot air, placing a rad outside is the only option to keep more heat out of the house.

timmah

member

Activity: 70

Merit: 10

What are you using to seal the plates?

steveo

newbie

Activity: 17

Merit: 0

that's kind of what I had in mind.

kuusj98

hero member

Activity: 812

Merit: 1000

I <3 VW Beetles

Quote from: Biffa on May 20, 2014, 10:17:50 AM

Quote from: steveo on May 20, 2014, 07:43:20 AM

This is interesting, I might need to order this to keep things cool in my house!

Only way you are going to do that is to put the radiator outside the house.

Water cooling doesn't remove the need to convert the energy into heat and then expel the heat into the ambient air.

Water cooling doesn't make your room cooler on its own.

Indeed, becouse water can take huge amounts of heat in itself doesn't mean it goes away, you only relocate the hot air, placing a rad outside is the only option to keep more heat out of the house.

Biffa

legendary

Activity: 3234

Merit: 1220

Quote from: steveo on May 20, 2014, 07:43:20 AM

This is interesting, I might need to order this to keep things cool in my house!

Only way you are going to do that is to put the radiator outside the house.

Water cooling doesn't remove the need to convert the energy into heat and then expel the heat into the ambient air.

Water cooling doesn't make your room cooler on its own.

steveo

newbie

Activity: 17

Merit: 0

This is interesting, I might need to order this to keep things cool in my house!

darrenyu

member

Activity: 71

Merit: 10

Worldwide shipping include / EMS
0.12B for two piece of water cooling borad. (For one S1 use)

Package will include two piece board like below:
http://btc-pig.com/21404149757307_387.jpg

tzortz

hero member

Activity: 728

Merit: 500

Quote from: skleven on April 09, 2014, 12:33:42 PM

Got 3 antminers delivered on my doorstep today. OC`d to 400, added extra fan and lowered temp by 4-5c. A better option than watercooling imo.

Is more like a hobby, rather than the result showed here. Nicely done.

Needs some neon lamps underneath now.

tzortz

hero member

Activity: 728

Merit: 500

Quote from: zulover on April 09, 2014, 06:46:10 AM

So how much more can you overclock the s1 withis solution? 220 possible?

Need the pencil mod also on the dcdc resistors.

skleven

sr. member

Activity: 281

Merit: 250

Got 3 antminers delivered on my doorstep today. OC`d to 400, added extra fan and lowered temp by 4-5c. A better option than watercooling imo.

cryptomatt

member

Activity: 85

Merit: 10

Cool idea, kind of a waste of money though. Definitely a hobbyist move.

zulover

hero member

Activity: 583

Merit: 500

So how much more can you overclock the s1 withis solution? 220 possible?

The Doktor

jr. member

Activity: 82

Merit: 1

DOGEvangelist

Quote from: darrenyu on April 08, 2014, 08:18:25 PM

A set of water cooling parts may sell around 0.26BTC~0.3BTC. (Include delivery fee worldwide)

A chunk of aluminum is much cheaper, and I've got a CNC mill Grin

darrenyu

member

Activity: 71

Merit: 10

A set of water cooling parts may sell around 0.26BTC~0.3BTC. (Include delivery fee worldwide)

The Doktor

jr. member

Activity: 82

Merit: 1

DOGEvangelist

Quote from: jimrome on April 07, 2014, 07:47:52 PM

And wear gloves. Seriously.

Never! Any machinist with even half a brain will not wear gloves. Gloves are very tough, they get caught in the cutter your fucked.

The idea of water cooling an antminer may be a good one, but only if you put the radiator outside, or use well water and discharge it back into the ground. You could also use water from a stream or pond on your property. Just to get the heat out of the building, especially if you're running a few KW of mining equipment.

I would use 6063 aluminum alloy or similar, failure from corrosion would take much longer than an antminer will be worth running, unless your pumping saltwater through it.

jimrome

sr. member

Activity: 434

Merit: 250

Quote from: temen on April 07, 2014, 11:44:48 AM

I think this is cool=) öhm... course its cools as it cools it down, what i want to say its a neat thing=)

If you are machining, start using protective eyewear now! I used to cut aluminium with my protective eyeglasses on and even with the use of glasses I had to dig scrap-aluminium out of my eyes couple of times. Its not nice to have 1cm aluminium stick prodtruding in your eye and trying to keep eyelash open with your your hands as to get no more damage and trying to get it out in front of mirror with pliers.

Use he protective eyewear! I think it still saved my eye, without them it could have been way worse

We need more oil/water cooled setup manufacturers, this is cool!

And wear gloves. Seriously.

tzortz

hero member

Activity: 728

Merit: 500

Nice hobby solution, but isn't it very expensive Huh

temen

member

Activity: 119

Merit: 10

I think this is cool=) öhm... course its cools as it cools it down, what i want to say its a neat thing=)

If you are machining, start using protective eyewear now! I used to cut aluminium with my protective eyeglasses on and even with the use of glasses I had to dig scrap-aluminium out of my eyes couple of times. Its not nice to have 1cm aluminium stick prodtruding in your eye and trying to keep eyelash open with your your hands as to get no more damage and trying to get it out in front of mirror with pliers.

Use he protective eyewear! I think it still saved my eye, without them it could have been way worse

We need more oil/water cooled setup manufacturers, this is cool!

nrg_wolf

legendary

Activity: 882

Merit: 1000

cheap and nasty, poorly made not to mention.... very little research done into long term useage and correct setup.....

seriouscoin

hero member

Activity: 658

Merit: 500

why?

Alu will corrode so fast anyway.

Actually S1 will be obsolete even faster Cheesy

darrenyu

member

Activity: 71

Merit: 10

In Taiwan, it cost me 100USD total.
Water Cooling Sink+ Pipe+ Pump&Tank + Cooling pipe

skleven

sr. member

Activity: 281

Merit: 250

Wery cool. But it`s hard to justify adding watercooling to a S1. Where i live, the absolute cheapest watercooler(CPU) cost a bit over 1/4 of what the miner cost. Sad

darrenyu

member

Activity: 71

Merit: 10

Hi,
Thanks for your attention.
It is easy and cheap.

Step1. take off pcb from ant miner. And use waterproof glue to seal water cooling sink
and heat sink.

Step2. lock back pcb. and connect pipe to water pump+tank.

Done~

mojacho

newbie

Activity: 137

Merit: 0

any tutorial for this ?

ZiG

sr. member

Activity: 406

Merit: 250

Very interesting...Could you post more details about this setup...?

darrenyu

member

Activity: 71

Merit: 10

Hi
It lower temp about 15 degrees .

Order With Paypal
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8H499UVNMNCL6

Worldwide shipping include / EMS
0.12B for two piece of water cooling borad. (For one S1 use)

Package will include two piece board like below:
http://btc-pig.com/21404149757307_387.jpg

Setup Video:

Step1
http://youtu.be/r2KHtzyLQt0

Step2
http://www.youtube.com/watch?v=L1XApaZbnIw

Step3
http://www.youtube.com/watch?v=1DMOFCnaUWE

Step4
http://youtu.be/8fA3Eh3GEmE

Connector Prepare:
https://www.youtube.com/watch?v=em4HZ7q_Bys

Topic: Antminer S1 Water Cooling (Read 5807 times)