Author

Topic: Antminer S17 defect, suddenly no longer reachable (Read 90 times)

member
Activity: 166
Merit: 82
EET/NASA intern 2013 Bitmain/MicroBT/IPC cert
As a matter of fact I just posted the perfect answer to your question this week. https://bitcointalksearch.org/topic/m.60064378
Cheers!
J
newbie
Activity: 28
Merit: 11
Hi!
I use an antminer S17 at home. Yesterday, suddenly, mining stopped. Since this moment I cannot reach the miner UI, also ping is not possible. The network itself works, leds for network are on. Any idea, what I could do? A reset changed nothing.
Thanks
are your control board leds blinking or on?
legendary
Activity: 3206
Merit: 2904
Block halving is coming.
I think he just push the reset button if you want to reset it to factory default I think IP report button will work not the reset button.
You can perform the factory reset by holding the IP report button for 15 seconds then release.

If still does not work try the suggestions above flashing it through the SD card should work but if it still can't able to access through WebGUI then check your cable maybe the terminal has full of dust and rust so try to clean it if not then replace the cable and try to access it with another device and use the older version of chrome to access the miner's IP.
legendary
Activity: 2170
Merit: 6279
be constructive or S.T.F.U
How did you perform the reset? The safest way would be using an Sdcard to flash different firmware, if that does not fix it -- you will need another control board.
newbie
Activity: 1
Merit: 0
Hi!
I use an antminer S17 at home. Yesterday, suddenly, mining stopped. Since this moment I cannot reach the miner UI, also ping is not possible. The network itself works, leds for network are on. Any idea, what I could do? A reset changed nothing.
Thanks
Jump to: