Author

Topic: Antminer S17 zero hash rate (Read 60 times)

legendary
Activity: 3472
Merit: 3217
Playbet.io - Crypto Casino and Sportsbook
November 02, 2021, 12:32:39 PM
#6
But still now hash rate showing, should it be left running for a certain amount of time before the hash rate will show?


What do you mean it still not showing any hashrate? Is it in the pool? Just keep it running because nicehash is a little bit delay. Or just go to your miner status to see if there is hashrate.

According to the logs below it hash of around 38th/s so only two hashboard running?

Code:
2021-11-02 16:13:05 driver-btm-api.c:198:set_miner_status: STATUS_INIT
2021-11-02 16:13:10 driver-btm-api.c:198:set_miner_status: STATUS_OKAY
2021-11-02 16:13:11 frequency.c:216:get_ideal_hash_rate_GH: ideal_hash_rate = 38564
2021-11-02 16:13:11 frequency.c:236:get_sale_hash_rate_GH: sale_hash_rate = 38000

But it's still not stable because you still have this error

Code:
2021-11-02 16:12:18 driver-btm-api.c:198:set_miner_status: ERROR_TEMP_TOO_HIGH
2021-11-02 16:12:18 driver-btm-api.c:139:stop_mining: stop mining: over max temp
2021-11-02 16:12:18 thread.c:818:cancel_temperature_monitor_thread: cancel thread
2021-11-02 16:12:18 thread.c:828:cancel_read_nonce_reg_thread: cancel thread
2021-11-02 16:12:18 driver-btm-api.c:124:killall_hashboard: ****power off hashboard****

It might be because of the defective hasboard. Try to remove the first hashboard and run it again lets see if the two will keep running and hash.
newbie
Activity: 2
Merit: 0
November 02, 2021, 11:30:49 AM
#5
Ok thanks for the help, so I have changed the pool URLs to stratum+tcp://sha256asicboost.eu-west.nicehash.com:3368 & stratum+tcp://sha256asicboost.eu-north.nicehash.com:3368

But still now hash rate showing, should it be left running for a certain amount of time before the hash rate will show?

I have attached the kernel log now

Looking to sell the miner so just want to test what is working or not. I know 1 of the Hashbaords is being intermittent, has loaded a few times with all 3 boards with a chip count of 48 on each.


Code:
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203612K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25764K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12724K (cce94000 - cdb01000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 4156965229
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID F0880E93-A85E-4537-B2B1-E7028598923B, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 1795/824, WL threshold: 4096, image sequence number: 3563076859
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xab013
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
Nov  2 16:11:21 (none) user.notice kernel: random: nonblocking pool is initialized
Nov  2 16:13:10 (none) local0.notice bmminer: set_start_time_point total_tv_start_sys=302 total_tv_end_sys=303
Nov  2 16:13:12 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_api_detect return: 0
Nov  2 16:13:13 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_update_job return: 0
Nov  2 16:13:14 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_shutdown return: 0
Nov  2 16:13:14 (none) local0.err cgminer: Miner compile time: Mon Apr 27 13:23:07 CST 2020 type: Antminer S17
Nov  2 16:13:14 (none) local0.notice cgminer[997]: about to send detect
Nov  2 16:13:14 (none) local0.notice cgminer[997]: set_start_time_point total_tv_start_sys=306 total_tv_end_sys=307
Nov  2 16:13:14 (none) local0.notice cgminer[997]: Probing for an alive pool
Nov  2 16:13:14 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:13:14 (none) local0.notice cgminer[997]: LOW POWER MODE!
Nov  2 16:13:14 (none) local0.notice cgminer[997]: Pool 0 difficulty changed to 132262.4
Nov  2 16:13:14 (none) local0.notice cgminer[997]: in stratum_sthread
Nov  2 16:13:14 (none) local0.notice cgminer[997]: Network diff set to 21.7T
Nov  2 16:13:14 (none) local0.notice cgminer[997]: POOL 0 support ab mode!
Nov  2 16:13:14 (none) local0.notice cgminer[997]: LOW POWER MODE!
Nov  2 16:13:14 (none) local0.notice cgminer[997]: in stratum_sthread
Nov  2 16:13:15 (none) local0.notice cgminer[997]: update job
Nov  2 16:13:15 (none) local0.notice cgminer[997]: job buf total len:2501, offset:2501
Nov  2 16:13:15 (none) local0.notice cgminer[997]: about to send job, size is 2501
Nov  2 16:13:15 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2501
Nov  2 16:13:15 (none) local0.notice bmminer: parse job buf len:2501
Nov  2 16:13:20 (none) local0.warn cgminer[997]: API running in IP access mode on port 4028 (15)
Nov  2 16:13:31 (none) local0.notice cgminer[997]: update job
Nov  2 16:13:31 (none) local0.notice cgminer[997]: job buf total len:2501, offset:2501
Nov  2 16:13:31 (none) local0.notice cgminer[997]: about to send job, size is 2501
Nov  2 16:13:31 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2501
Nov  2 16:13:31 (none) local0.notice bmminer: parse job buf len:2501
Nov  2 16:13:44 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:13:59 (none) local0.notice cgminer[997]: update job
Nov  2 16:13:59 (none) local0.notice cgminer[997]: job buf total len:2501, offset:2501
Nov  2 16:13:59 (none) local0.notice cgminer[997]: about to send job, size is 2501
Nov  2 16:13:59 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2501
Nov  2 16:13:59 (none) local0.notice bmminer: parse job buf len:2501
Nov  2 16:14:06 (none) local0.notice cgminer[997]: Pool 0 extranonce change requested
Nov  2 16:14:06 (none) local0.notice cgminer[997]: Stratum from pool 0 requested work restart
Nov  2 16:14:06 (none) local0.notice cgminer[997]: update job
Nov  2 16:14:06 (none) local0.notice cgminer[997]: job buf total len:2454, offset:2454
Nov  2 16:14:06 (none) local0.notice cgminer[997]: about to send job, size is 2454
Nov  2 16:14:06 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2454
Nov  2 16:14:06 (none) local0.notice bmminer: parse job buf len:2454
Nov  2 16:14:14 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:14:19 (none) local0.notice cgminer[997]: update job
Nov  2 16:14:19 (none) local0.notice cgminer[997]: job buf total len:2454, offset:2454
Nov  2 16:14:19 (none) local0.notice cgminer[997]: about to send job, size is 2454
Nov  2 16:14:19 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2454
Nov  2 16:14:19 (none) local0.notice bmminer: parse job buf len:2454
Nov  2 16:14:40 (none) local0.notice cgminer[997]: Pool 0 extranonce change requested
Nov  2 16:14:40 (none) local0.notice cgminer[997]: Network diff set to 1.26G
Nov  2 16:14:40 (none) local0.notice cgminer[997]: Stratum from pool 0 detected new block at height 13935828
Nov  2 16:14:40 (none) local0.notice cgminer[997]: update job
Nov  2 16:14:40 (none) local0.notice cgminer[997]: job buf total len:2120, offset:2120
Nov  2 16:14:40 (none) local0.notice cgminer[997]: about to send job, size is 2120
Nov  2 16:14:40 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2120
Nov  2 16:14:40 (none) local0.notice bmminer: parse job buf len:2120
Nov  2 16:14:42 (none) local0.notice cgminer[997]: Network diff set to 1.21G
Nov  2 16:14:42 (none) local0.notice cgminer[997]: Stratum from pool 0 detected new block at height 13935829
Nov  2 16:14:42 (none) local0.notice cgminer[997]: update job
Nov  2 16:14:42 (none) local0.notice cgminer[997]: job buf total len:2216, offset:2216
Nov  2 16:14:42 (none) local0.notice cgminer[997]: about to send job, size is 2216
Nov  2 16:14:42 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2216
Nov  2 16:14:42 (none) local0.notice bmminer: parse job buf len:2216
Nov  2 16:14:44 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:14:49 (none) local0.notice cgminer[997]: Network diff set to 1.17G
Nov  2 16:14:49 (none) local0.notice cgminer[997]: Stratum from pool 0 detected new block at height 13935830
Nov  2 16:14:49 (none) local0.notice cgminer[997]: update job
Nov  2 16:14:49 (none) local0.notice cgminer[997]: job buf total len:2216, offset:2216
Nov  2 16:14:49 (none) local0.notice cgminer[997]: about to send job, size is 2216
Nov  2 16:14:49 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2216
Nov  2 16:14:49 (none) local0.notice bmminer: parse job buf len:2216
Nov  2 16:14:52 (none) local0.notice cgminer[997]: Network diff set to 194G
Nov  2 16:14:52 (none) local0.notice cgminer[997]: Stratum from pool 0 detected new block at height 712284
Nov  2 16:14:52 (none) local0.notice cgminer[997]: update job
Nov  2 16:14:52 (none) local0.notice cgminer[997]: job buf total len:2200, offset:2200
Nov  2 16:14:52 (none) local0.notice cgminer[997]: about to send job, size is 2200
Nov  2 16:14:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2200
Nov  2 16:14:52 (none) local0.notice bmminer: parse job buf len:2200
Nov  2 16:15:07 (none) local0.notice cgminer[997]: update job
Nov  2 16:15:07 (none) local0.notice cgminer[997]: job buf total len:2264, offset:2264
Nov  2 16:15:07 (none) local0.notice cgminer[997]: about to send job, size is 2264
Nov  2 16:15:07 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2264
Nov  2 16:15:07 (none) local0.notice bmminer: parse job buf len:2264
Nov  2 16:15:14 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:15:14 (none) local0.notice cgminer[997]: Pool 0 difficulty changed to 70000
Nov  2 16:15:21 (none) local0.notice cgminer[997]: update job
Nov  2 16:15:21 (none) local0.notice cgminer[997]: job buf total len:2264, offset:2264
Nov  2 16:15:21 (none) local0.notice cgminer[997]: about to send job, size is 2264
Nov  2 16:15:21 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2264
Nov  2 16:15:21 (none) local0.notice bmminer: parse job buf len:2264
Nov  2 16:15:35 (none) local0.notice cgminer[997]: update job
Nov  2 16:15:35 (none) local0.notice cgminer[997]: job buf total len:2296, offset:2296
Nov  2 16:15:35 (none) local0.notice cgminer[997]: about to send job, size is 2296
Nov  2 16:15:35 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2296
Nov  2 16:15:35 (none) local0.notice bmminer: parse job buf len:2296
Nov  2 16:15:44 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:15:49 (none) local0.notice cgminer[997]: update job
Nov  2 16:15:49 (none) local0.notice cgminer[997]: job buf total len:2296, offset:2296
Nov  2 16:15:49 (none) local0.notice cgminer[997]: about to send job, size is 2296
Nov  2 16:15:49 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2296
Nov  2 16:15:49 (none) local0.notice bmminer: parse job buf len:2296
Nov  2 16:16:03 (none) local0.notice cgminer[997]: update job
Nov  2 16:16:03 (none) local0.notice cgminer[997]: job buf total len:2296, offset:2296
Nov  2 16:16:03 (none) local0.notice cgminer[997]: about to send job, size is 2296
Nov  2 16:16:03 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2296
Nov  2 16:16:03 (none) local0.notice bmminer: parse job buf len:2296
Nov  2 16:16:14 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:16:17 (none) local0.notice cgminer[997]: update job
Nov  2 16:16:17 (none) local0.notice cgminer[997]: job buf total len:2328, offset:2328
Nov  2 16:16:17 (none) local0.notice cgminer[997]: about to send job, size is 2328
Nov  2 16:16:17 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2328
Nov  2 16:16:17 (none) local0.notice bmminer: parse job buf len:2328
Nov  2 16:16:31 (none) local0.notice cgminer[997]: update job
Nov  2 16:16:31 (none) local0.notice cgminer[997]: job buf total len:2328, offset:2328
Nov  2 16:16:31 (none) local0.notice cgminer[997]: about to send job, size is 2328
Nov  2 16:16:31 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2328
Nov  2 16:16:31 (none) local0.notice bmminer: parse job buf len:2328
Nov  2 16:16:35 (none) local0.notice cgminer[997]: Network diff set to 194G
Nov  2 16:16:35 (none) local0.notice cgminer[997]: Stratum from pool 0 detected new block at height 712285
Nov  2 16:16:35 (none) local0.notice cgminer[997]: update job
Nov  2 16:16:35 (none) local0.notice cgminer[997]: job buf total len:2296, offset:2296
Nov  2 16:16:35 (none) local0.notice cgminer[997]: about to send job, size is 2296
Nov  2 16:16:35 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2296
Nov  2 16:16:35 (none) local0.notice bmminer: parse job buf len:2296
Nov  2 16:16:35 (none) local0.notice cgminer[997]: update job
Nov  2 16:16:35 (none) local0.notice cgminer[997]: job buf total len:2296, offset:2296
Nov  2 16:16:35 (none) local0.notice cgminer[997]: about to send job, size is 2296
Nov  2 16:16:35 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2296
Nov  2 16:16:35 (none) local0.notice bmminer: parse job buf len:2296
Nov  2 16:16:44 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:16:51 (none) local0.notice cgminer[997]: update job
Nov  2 16:16:51 (none) local0.notice cgminer[997]: job buf total len:2296, offset:2296
Nov  2 16:16:51 (none) local0.notice cgminer[997]: about to send job, size is 2296
Nov  2 16:16:51 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2296
Nov  2 16:16:51 (none) local0.notice bmminer: parse job buf len:2296
Nov  2 16:16:57 (none) local0.notice cgminer[997]: Network diff set to 194G
Nov  2 16:16:57 (none) local0.notice cgminer[997]: Stratum from pool 0 detected new block at height 712286
Nov  2 16:16:57 (none) local0.notice cgminer[997]: update job
Nov  2 16:16:57 (none) local0.notice cgminer[997]: job buf total len:2200, offset:2200
Nov  2 16:16:57 (none) local0.notice cgminer[997]: about to send job, size is 2200
Nov  2 16:16:57 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2200
Nov  2 16:16:57 (none) local0.notice bmminer: parse job buf len:2200
Nov  2 16:17:02 (none) local0.notice cgminer[997]: Pool 0 extranonce change requested
Nov  2 16:17:02 (none) local0.notice cgminer[997]: Network diff set to 21.7T
Nov  2 16:17:02 (none) local0.notice cgminer[997]: Stratum from pool 0 detected new block at height 707880
Nov  2 16:17:02 (none) local0.notice cgminer[997]: update job
Nov  2 16:17:02 (none) local0.notice cgminer[997]: job buf total len:2454, offset:2454
Nov  2 16:17:02 (none) local0.notice cgminer[997]: about to send job, size is 2454
Nov  2 16:17:02 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2454
Nov  2 16:17:02 (none) local0.notice bmminer: parse job buf len:2454
Nov  2 16:17:14 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:17:19 (none) local0.notice cgminer[997]: update job
Nov  2 16:17:19 (none) local0.notice cgminer[997]: job buf total len:2454, offset:2454
Nov  2 16:17:19 (none) local0.notice cgminer[997]: about to send job, size is 2454
Nov  2 16:17:19 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2454
Nov  2 16:17:19 (none) local0.notice bmminer: parse job buf len:2454
Nov  2 16:17:44 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:17:49 (none) local0.notice cgminer[997]: update job
Nov  2 16:17:49 (none) local0.notice cgminer[997]: job buf total len:2454, offset:2454
Nov  2 16:17:49 (none) local0.notice cgminer[997]: about to send job, size is 2454
Nov  2 16:17:49 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2454
Nov  2 16:17:49 (none) local0.notice bmminer: parse job buf len:2454
Nov  2 16:18:14 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:18:19 (none) local0.notice cgminer[997]: update job
Nov  2 16:18:19 (none) local0.notice cgminer[997]: job buf total len:2454, offset:2454
Nov  2 16:18:19 (none) local0.notice cgminer[997]: about to send job, size is 2454
Nov  2 16:18:19 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2454
Nov  2 16:18:19 (none) local0.notice bmminer: parse job buf len:2454
Nov  2 16:18:44 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:18:49 (none) local0.notice cgminer[997]: update job
Nov  2 16:18:49 (none) local0.notice cgminer[997]: job buf total len:2454, offset:2454
Nov  2 16:18:49 (none) local0.notice cgminer[997]: about to send job, size is 2454
Nov  2 16:18:49 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2454
Nov  2 16:18:49 (none) local0.notice bmminer: parse job buf len:2454
Nov  2 16:19:14 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:19:19 (none) local0.notice cgminer[997]: update job
Nov  2 16:19:19 (none) local0.notice cgminer[997]: job buf total len:2454, offset:2454
Nov  2 16:19:19 (none) local0.notice cgminer[997]: about to send job, size is 2454
Nov  2 16:19:19 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2454
Nov  2 16:19:19 (none) local0.notice bmminer: parse job buf len:2454
Nov  2 16:19:44 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:19:49 (none) local0.notice cgminer[997]: update job
Nov  2 16:19:49 (none) local0.notice cgminer[997]: job buf total len:2454, offset:2454
Nov  2 16:19:49 (none) local0.notice cgminer[997]: about to send job, size is 2454
Nov  2 16:19:49 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2454
Nov  2 16:19:49 (none) local0.notice bmminer: parse job buf len:2454
Nov  2 16:20:14 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:20:19 (none) local0.notice cgminer[997]: update job
Nov  2 16:20:19 (none) local0.notice cgminer[997]: job buf total len:2454, offset:2454
Nov  2 16:20:19 (none) local0.notice cgminer[997]: about to send job, size is 2454
Nov  2 16:20:19 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2454
Nov  2 16:20:19 (none) local0.notice bmminer: parse job buf len:2454
Nov  2 16:20:44 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:20:49 (none) local0.notice cgminer[997]: update job
Nov  2 16:20:49 (none) local0.notice cgminer[997]: job buf total len:2454, offset:2454
Nov  2 16:20:49 (none) local0.notice cgminer[997]: about to send job, size is 2454
Nov  2 16:20:49 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2454
Nov  2 16:20:49 (none) local0.notice bmminer: parse job buf len:2454
Nov  2 16:21:14 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:21:19 (none) local0.notice cgminer[997]: update job
Nov  2 16:21:19 (none) local0.notice cgminer[997]: job buf total len:2454, offset:2454
Nov  2 16:21:19 (none) local0.notice cgminer[997]: about to send job, size is 2454
Nov  2 16:21:19 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2454
Nov  2 16:21:19 (none) local0.notice bmminer: parse job buf len:2454
Nov  2 16:21:44 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:21:49 (none) local0.notice cgminer[997]: update job
Nov  2 16:21:49 (none) local0.notice cgminer[997]: job buf total len:2454, offset:2454
Nov  2 16:21:49 (none) local0.notice cgminer[997]: about to send job, size is 2454
Nov  2 16:21:49 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2454
Nov  2 16:21:49 (none) local0.notice bmminer: parse job buf len:2454
Nov  2 16:22:14 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:22:19 (none) local0.notice cgminer[997]: update job
Nov  2 16:22:19 (none) local0.notice cgminer[997]: job buf total len:2454, offset:2454
Nov  2 16:22:19 (none) local0.notice cgminer[997]: about to send job, size is 2454
Nov  2 16:22:19 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2454
Nov  2 16:22:19 (none) local0.notice bmminer: parse job buf len:2454
Nov  2 16:22:44 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:22:49 (none) local0.notice cgminer[997]: update job
Nov  2 16:22:49 (none) local0.notice cgminer[997]: job buf total len:2454, offset:2454
Nov  2 16:22:49 (none) local0.notice cgminer[997]: about to send job, size is 2454
Nov  2 16:22:49 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2454
Nov  2 16:22:49 (none) local0.notice bmminer: parse job buf len:2454
Nov  2 16:23:14 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:23:19 (none) local0.notice cgminer[997]: update job
Nov  2 16:23:19 (none) local0.notice cgminer[997]: job buf total len:2454, offset:2454
Nov  2 16:23:19 (none) local0.notice cgminer[997]: about to send job, size is 2454
Nov  2 16:23:19 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2454
Nov  2 16:23:19 (none) local0.notice bmminer: parse job buf len:2454
Nov  2 16:23:44 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:23:49 (none) local0.notice cgminer[997]: update job
Nov  2 16:23:49 (none) local0.notice cgminer[997]: job buf total len:2454, offset:2454
Nov  2 16:23:49 (none) local0.notice cgminer[997]: about to send job, size is 2454
Nov  2 16:23:49 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2454
Nov  2 16:23:49 (none) local0.notice bmminer: parse job buf len:2454
Nov  2 16:24:14 (none) local0.warn cgminer[997]: No Stratum, GBT or Solo support in pool 2  unable to use
Nov  2 16:24:19 (none) local0.notice cgminer[997]: update job
Nov  2 16:24:19 (none) local0.notice cgminer[997]: job buf total len:2454, offset:2454
Nov  2 16:24:19 (none) local0.notice cgminer[997]: about to send job, size is 2454
Nov  2 16:24:19 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000528 size: 2454
Nov  2 16:24:19 (none) local0.notice bmminer: parse job buf len:2454
2021-11-02 16:08:56 driver-btm-api.c:542:init_freq_mode: This is scan-user version
2021-11-02 16:08:56 driver-btm-api.c:1877:bitmain_soc_init: opt_multi_version     = 1
2021-11-02 16:08:56 driver-btm-api.c:1878:bitmain_soc_init: opt_bitmain_ab        = 1
2021-11-02 16:08:56 driver-btm-api.c:1879:bitmain_soc_init: opt_bitmain_work_mode = 2
2021-11-02 16:08:56 driver-btm-api.c:1880:bitmain_soc_init: Miner compile time: Mon Apr 27 13:23:07 CST 2020 type: Antminer S17
2021-11-02 16:08:56 driver-btm-api.c:1881:bitmain_soc_init: commit version: d22f356 2020-04-24 18:30:49, build by: lol 2020-04-27 13:30:25
2021-11-02 16:08:56 driver-btm-api.c:1691:show_sn: no SN got, please write SN to /nvdata/sn
2021-11-02 16:08:56 driver-btm-api.c:1040:miner_device_init: Detect 256MB control board of XILINX
2021-11-02 16:08:56 driver-btm-api.c:988:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2021-11-02 16:08:56 thread.c:783:create_read_nonce_reg_thread: create thread
2021-11-02 16:09:02 driver-btm-api.c:972:init_miner_version: miner ID : 804475ce5740885c
2021-11-02 16:09:02 driver-btm-api.c:978:init_miner_version: FPGA Version = 0xB013
2021-11-02 16:09:07 driver-btm-api.c:616:get_product_id: product_id[0] = 0
2021-11-02 16:09:07 driver-btm-api.c:616:get_product_id: product_id[1] = 0
2021-11-02 16:09:07 driver-btm-api.c:616:get_product_id: product_id[2] = 0
2021-11-02 16:09:07 driver-btm-api.c:560:_set_project_type: project:1
2021-11-02 16:09:07 driver-btm-api.c:585:_set_project_type: Project type: Antminer S17
2021-11-02 16:09:07 driver-btm-api.c:596:dump_pcb_bom_version: Chain [0] PCB Version: 0x0101
2021-11-02 16:09:07 driver-btm-api.c:597:dump_pcb_bom_version: Chain [0] BOM Version: 0x0103
2021-11-02 16:09:07 driver-btm-api.c:596:dump_pcb_bom_version: Chain [1] PCB Version: 0x0101
2021-11-02 16:09:07 driver-btm-api.c:597:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103
2021-11-02 16:09:07 driver-btm-api.c:596:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101
2021-11-02 16:09:07 driver-btm-api.c:597:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103
2021-11-02 16:09:10 driver-btm-api.c:1802:bitmain_board_init: Fan check passed.
2021-11-02 16:09:11 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-11-02 16:09:13 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9
2021-11-02 16:09:15 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-11-02 16:09:17 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9
2021-11-02 16:09:18 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-11-02 16:09:20 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9
2021-11-02 16:09:20 thread.c:778:create_pic_heart_beat_thread: create thread
2021-11-02 16:09:20 power_api.c:207:power_init: Power init:
2021-11-02 16:09:20 power_api.c:208:power_init: current_voltage_raw = 0
2021-11-02 16:09:20 power_api.c:209:power_init: highest_voltage_raw = 2100
2021-11-02 16:09:20 power_api.c:210:power_init: working_voltage_raw = 1830
2021-11-02 16:09:20 power_api.c:211:power_init: higher_voltage_raw  = 1950
2021-11-02 16:09:20 driver-btm-api.c:1812:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2021-11-02 16:09:20 power_api.c:181:power_off: init gpio907
2021-11-02 16:09:52 power_api.c:251:set_to_highest_voltage: Set to voltage raw 2100, one step.
2021-11-02 16:09:54 power_api.c:87:check_voltage_multi: retry time: 0
2021-11-02 16:09:55 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.136758
2021-11-02 16:09:56 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.149004
2021-11-02 16:09:57 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.100019
2021-11-02 16:09:57 power_api.c:50:_get_avg_voltage: average_voltage = 21.128593
2021-11-02 16:09:57 power_api.c:68:check_voltage: target_vol = 21.00, actural_vol = 21.13, check voltage passed.
2021-11-02 16:09:57 uart.c:71:set_baud: set fpga_baud to 115200
2021-11-02 16:10:08 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0
2021-11-02 16:10:19 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1
2021-11-02 16:10:29 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2
2021-11-02 16:10:29 driver-btm-api.c:942:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0
2021-11-02 16:10:42 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 48 asic, times 0
2021-11-02 16:10:53 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 48 asic, times 0
2021-11-02 16:10:56 driver-btm-api.c:345:set_order_clock: chain[1]: set order clock, stragegy 3
2021-11-02 16:10:57 driver-btm-api.c:345:set_order_clock: chain[2]: set order clock, stragegy 3
2021-11-02 16:10:57 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2021-11-02 16:10:57 uart.c:71:set_baud: set fpga_baud to 3000000
2021-11-02 16:10:57 driver-btm-api.c:1574:check_clock_counter: freq 50 clock_counter_limit 6
2021-11-02 16:10:58 uart.c:71:set_baud: set fpga_baud to 115200
2021-11-02 16:10:58 voltage[1] = 1860
2021-11-02 16:10:58 voltage[2] = 1860
2021-11-02 16:10:58 power_api.c:219:set_working_voltage_raw: working_voltage_raw = 1860
2021-11-02 16:11:00 temperature.c:281:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 1 success.
2021-11-02 16:11:01 temperature.c:281:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success.
2021-11-02 16:11:01 uart.c:71:set_baud: set fpga_baud to 6000000
2021-11-02 16:11:02 driver-btm-api.c:245:check_bringup_temp: Bring up temperature is 20
2021-11-02 16:11:02 thread.c:798:create_check_miner_status_thread: create thread
2021-11-02 16:11:02 thread.c:788:create_set_miner_status_thread: create thread
2021-11-02 16:11:02 thread.c:773:create_temperature_monitor_thread: create thread
2021-11-02 16:11:02 frequency.c:749:inc_freq_with_fixed_vco: chain = 255, freq = 610, is_higher_voltage = true
2021-11-02 16:11:02 power_api.c:287:set_to_voltage_by_steps: Set to voltage raw 2020, step by step.
2021-11-02 16:11:21 power_api.c:87:check_voltage_multi: retry time: 0
2021-11-02 16:11:22 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 20.334638
2021-11-02 16:11:24 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 20.297900
2021-11-02 16:11:24 power_api.c:50:_get_avg_voltage: average_voltage = 20.316269
2021-11-02 16:11:24 power_api.c:68:check_voltage: target_vol = 20.20, actural_vol = 20.32, check voltage passed.
2021-11-02 16:11:53 power_api.c:287:set_to_voltage_by_steps: Set to voltage raw 1920, step by step.
2021-11-02 16:12:08 power_api.c:87:check_voltage_multi: retry time: 0
2021-11-02 16:12:09 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 19.287597
2021-11-02 16:12:10 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 19.281474
2021-11-02 16:12:10 power_api.c:50:_get_avg_voltage: average_voltage = 19.284536
2021-11-02 16:12:10 power_api.c:68:check_voltage: target_vol = 19.20, actural_vol = 19.28, check voltage passed.
2021-11-02 16:12:16 power_api.c:287:set_to_voltage_by_steps: Set to voltage raw 1860, step by step.
2021-11-02 16:12:18 thread.c:632:check_temperature: over max temp, pcb temp 58 (max 80), chip temp 104(max 103)
2021-11-02 16:12:18 driver-btm-api.c:198:set_miner_status: ERROR_TEMP_TOO_HIGH
2021-11-02 16:12:18 driver-btm-api.c:139:stop_mining: stop mining: over max temp
2021-11-02 16:12:18 thread.c:818:cancel_temperature_monitor_thread: cancel thread
2021-11-02 16:12:18 thread.c:828:cancel_read_nonce_reg_thread: cancel thread
2021-11-02 16:12:18 driver-btm-api.c:124:killall_hashboard: ****power off hashboard****
2021-11-02 16:12:34 power_api.c:87:check_voltage_multi: retry time: 0
2021-11-02 16:12:35 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 19.214121
2021-11-02 16:12:36 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 19.103906
2021-11-02 16:12:36 power_api.c:50:_get_avg_voltage: average_voltage = 19.159013
2021-11-02 16:12:36 power_api.c:68:check_voltage: target_vol = 18.60, actural_vol = 19.16, check voltage passed.
2021-11-02 16:12:45 driver-btm-api.c:528:set_timeout: freq = 610, percent = 90, hcn = 73728, timeout = 120
2021-11-02 16:12:45 power_api.c:225:set_higher_voltage_raw: higher_voltage_raw = 1900
2021-11-02 16:12:45 power_api.c:281:set_to_higher_voltage_by_steps: Set to voltage raw 1900, step by step.
2021-11-02 16:13:02 power_api.c:87:check_voltage_multi: retry time: 0
2021-11-02 16:13:03 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 19.214121
2021-11-02 16:13:05 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 19.103906
2021-11-02 16:13:05 power_api.c:50:_get_avg_voltage: average_voltage = 19.159013
2021-11-02 16:13:05 power_api.c:68:check_voltage: target_vol = 19.00, actural_vol = 19.16, check voltage passed.
2021-11-02 16:13:05 thread.c:793:create_check_system_status_thread: create thread
2021-11-02 16:13:05 driver-btm-api.c:1988:bitmain_soc_init: Init done!
2021-11-02 16:13:05 driver-btm-api.c:198:set_miner_status: STATUS_INIT
2021-11-02 16:13:10 driver-btm-api.c:198:set_miner_status: STATUS_OKAY
2021-11-02 16:13:11 frequency.c:216:get_ideal_hash_rate_GH: ideal_hash_rate = 38564
2021-11-02 16:13:11 frequency.c:236:get_sale_hash_rate_GH: sale_hash_rate = 38000
2021-11-02 16:13:15 driver-btm-api.c:1199:dhash_chip_send_job: Version num 4
newbie
Activity: 2
Merit: 0
November 02, 2021, 09:10:42 AM
#4
Been mining with my S9's & S17s on Nicehash for years, and yes it may NOT be the most profitable, but it's def easy to use and set up.

Slushpool is also a good alternative if you are using Braiins OS (which is MUCH better than stock firmware & can be run from microSD card)

Don't really recommend using Nicehash firmware for S9's but it does show the Watts being used which is nice if you don't have an Ammeter.
legendary
Activity: 2436
Merit: 6643
be constructive or S.T.F.U
November 01, 2021, 08:04:15 PM
#3
The Bad news:

One of the hash boards on your miner is dead, you can see on the status page you only have two of them.

The Good news:

The other two hash boards show a complete chip count of 48 chips each, which means they are likely in a good shape, as to why it doesn't show on nicehash, well because nicehash is stupid, as the above member mentioned, you need to try the ASICboost URL, but a word of advice, avoid nicehash, it's a complete B.S, if you want to ride the rare waves of other SHA256 coins being more profitable you can use Viabtc and enable smart mining.
legendary
Activity: 3472
Merit: 3217
Playbet.io - Crypto Casino and Sportsbook
November 01, 2021, 12:34:37 PM
#2
Can you try to mine on their ASICboost pool?
Here's the pool server URL stratum+tcp://sha256asicboost.LOCATION.nicehash.com:3368
Just edit the location to any server you want like eu-west or eu-north.

And I'd like to suggest to upload the kernel logs again the link above doesn't work or is deleted. You can use pastebin.com or paste it here and use the insert code tag with the icon #
newbie
Activity: 2
Merit: 0
November 01, 2021, 11:10:22 AM
#1
Trying to get an Antminer S17 up and running. Set it up with nicehash pool 1 stratum+tcp://sha256.eu-west.nicehash.com:3334 & pool 2 stratum+tcp://sha256.eu-north.nicehash.com:3334

It has registered as a rig under nicehash and gone to green mining status, and getting alive status on the miner status page. However, under both nicehash and the miner status page it is showing zero hash rate.

Would be grateful for some ideas as to why I'm getting zero hash rate.
https://ibb.co/nD2FTBR

Kernel Log:----

txt file https://file.io/QzTp4yzYC0nq
Jump to: