Topic: Antminer S2 Help (Read 640 times)
-
I bought a router and configured it, my computers wifi sends the signal to the ethernet to the router. And the router connects to my antminer. I use my phone and connect to the router so both the antminer and phone are connected. But on my phone i cant connect to either the antminer or router. I dont know what to do. The miner mines fine, but i have it geard at an old pool which isnt around anymore and i need to get to the miners settings to change to antpool
-
Did u check, whether the wired LAN adapter on your computer really has it's own subnet?
but my other question would i be able to mine to cgminer via usb cable to my computer if i upgraded the beaglebone?
It didnt work...the ip that pops up on my s2 is 127.0.0.1 and i cant connect too it. Ill give you .02 btc if you can help me through it
Connect laptop to WIFI, enable ICS and then plug in the Antminer S2.
Make sure you configure the S2 to run on Subnet 192.168.137.X
Make sure you configure the S2 to run on Subnet 192.168.137.X
Hello,
Im in college and none of my ethernet ports in my room are enabled. How can i get my Antminer S2 to connect to my computer so i can use my wifis computer to mine. (sharing connections is disabled). Could i change the stripped down Beaglebone Black Rev and put in an actual one and then connect the usb port to my computer and use cgminer?
Im in college and none of my ethernet ports in my room are enabled. How can i get my Antminer S2 to connect to my computer so i can use my wifis computer to mine. (sharing connections is disabled). Could i change the stripped down Beaglebone Black Rev and put in an actual one and then connect the usb port to my computer and use cgminer?
Jump to: