Topic: Antminer S2 - Web GUI not loading (Read 2990 times)
Anyone?
Hello,
Was wondering if anyone has any helpful info. I had the SD card go bad on an Antminer S2, I replaced and reimaged the card according to the link below, but the WebGUI is not loading when I check the HTTP service looks like it is missing the configuration see below.
root@antMiner:/etc/init.d# lighttpd status
2000-01-01 00:30:26: (/home/xxl/AM335x/knc/setup-scripts/build/tmp-angstrom_v201 3_06-eglibc/work/armv7ahf-vfp-neon-angstrom-linux-gnueabi/lighttpd/1.4.32-r1/lig httpd-1.4.32/src/server.c.614) No configuration available. Try using -f option.
root@antMiner:/etc/init.d#
Link I used to reimage the SD card.
https://bitcointalksearch.org/topic/revive-a-dead-antminer-s2-with-beaglebone-black-rev-c-off-the-shelf-671625
Note: I did not replace the Beaglebone like they did in the link cause mine was working. I just had to replace the SD card.
TIA
Was wondering if anyone has any helpful info. I had the SD card go bad on an Antminer S2, I replaced and reimaged the card according to the link below, but the WebGUI is not loading when I check the HTTP service looks like it is missing the configuration see below.
root@antMiner:/etc/init.d# lighttpd status
2000-01-01 00:30:26: (/home/xxl/AM335x/knc/setup-scripts/build/tmp-angstrom_v201 3_06-eglibc/work/armv7ahf-vfp-neon-angstrom-linux-gnueabi/lighttpd/1.4.32-r1/lig httpd-1.4.32/src/server.c.614) No configuration available. Try using -f option.
root@antMiner:/etc/init.d#
Link I used to reimage the SD card.
https://bitcointalksearch.org/topic/revive-a-dead-antminer-s2-with-beaglebone-black-rev-c-off-the-shelf-671625
Note: I did not replace the Beaglebone like they did in the link cause mine was working. I just had to replace the SD card.
TIA
Jump to: