Author

Topic: AntMiner S3 ASIC Status "-" (Read 1266 times)

newbie
Activity: 5
Merit: 0
March 29, 2015, 08:04:28 AM
#7
Thank you very much everyone for your responses ... it turning the PSU for 5 minutes WAS Enough already returned to Normal ... Any recommendation paraOC ?

thx
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
March 28, 2015, 10:49:08 PM
#6
 you are running it too fast.

 lower the freq.

you are at freq 250 or 243

go to freq 231 or 237
hero member
Activity: 924
Merit: 1000
March 28, 2015, 07:27:58 PM
#5
When in doubt don't overclock the sh%t out.  Roll Eyes  M's Miner Monitor, name changed I believe.
legendary
Activity: 1456
Merit: 1000
March 27, 2015, 11:34:52 PM
#4
I Remote For arrived One Of Raspberry Pi and vnc server, and only I can restart , for here no longer know how many times I've rebooted the tapeworm OC following the guidelines 262 frequency , I 'm down to defect to see if it is managed As can lose and nothing more or less is good that again oc ...

she sometimes after 12 hours or one day a random chip was placed in "X " but with only restart was enough now not

thanks for your answer Cheesy

You might look at M's antmoniter.  It can do a lot as far as detecting certain criteria and rebooting a unit if it acts up.
newbie
Activity: 5
Merit: 0
March 27, 2015, 11:00:14 PM
#3
I Remote For arrived One Of Raspberry Pi and vnc server, and only I can restart , for here no longer know how many times I've rebooted the tapeworm OC following the guidelines 262 frequency , I 'm down to defect to see if it is managed As can lose and nothing more or less is good that again oc ...

she sometimes after 12 hours or one day a random chip was placed in "X " but with only restart was enough now not

thanks for your answer Cheesy
legendary
Activity: 1218
Merit: 1003
We are the champions of the night
March 27, 2015, 10:51:29 PM
#2
It just means that one of the ASIC chips isn't working.  Rebooting should fix it, but don't worry about it if it doesn't, you won't lose much power. 
newbie
Activity: 5
Merit: 0
March 27, 2015, 10:48:52 PM
#1
Good night beforehand I stand and I apologize for my bad English translator use ....

I call jacobo am from Venezuela ...

I entered the world of BTC a month ago I about bought a s3, until now it was working perfect, but tonight I realized that in the ASIC Status I get an symbol "-" (attached photo) no meaning I apologize if there is already a post on this subject do not consigui ... I could help it can be has a solution ? Use a certified power 750W

Thank You

https://i.imgur.com/QqtKtj5.png
Jump to: