nope i dont need that anymore, i have a fan that powered by a 1 molex connector that can be series each other
Thanks!
and
God Bless!!!!!
You are welcome dude. Just monitor the temperature.
Happy mining
Topic: Antminer S3+ Automatic SHUTDOWN (HELP ASAP) (Read 2318 times)
nope i dont need that anymore, i have a fan that powered by a 1 molex connector that can be series each other
Thanks!
and
God Bless!!!!!
You are welcome dude. Just monitor the temperature.
Happy mining
Hi!
Is it not recommended?
It survive 1 night non-stop
should i turn off the miner?
Thanks for your reply!
God Bless!!!!!
Yes, not recommended for long run. But i guess not problem until your Corsair CX750M arrive.
Just monitor the wire temperature not to hot
Im cooling the wires using 4 120mm fans
Thanks Zich for your help :3
God Bless!!!!!
Nice, fan cooling is good idea.
Or you can find EPS to 6pin converter
nope i dont need that anymore, i have a fan that powered by a 1 molex connector that can be series each other
Thanks!
and
God Bless!!!!!
Hi!
Is it not recommended?
It survive 1 night non-stop
should i turn off the miner?
Thanks for your reply!
God Bless!!!!!
Yes, not recommended for long run. But i guess not problem until your Corsair CX750M arrive.
Just monitor the wire temperature not to hot
Im cooling the wires using 4 120mm fans
Thanks Zich for your help :3
God Bless!!!!!
Nice, fan cooling is good idea.
Or you can find EPS to 6pin converter
Hi!
Is it not recommended?
It survive 1 night non-stop
should i turn off the miner?
Thanks for your reply!
God Bless!!!!!
Yes, not recommended for long run. But i guess not problem until your Corsair CX750M arrive.
Just monitor the wire temperature not to hot
Im cooling the wires using 4 120mm fans
and now its like normal.
Thanks Zich for your help :3
God Bless!!!!!
Hi!
Is it not recommended?
It survive 1 night non-stop
should i turn off the miner?
Thanks for your reply!
God Bless!!!!!
Yes, not recommended for long run. But i guess not problem until your Corsair CX750M arrive.
Just monitor the wire temperature not to hot
No wonder the wire getting warm.
I just find out that corsair VS550 only had one 6 pin from PSU. You need at least 2 separate connection from PSU.
Sorry dude, i didn't check the 6 pin availability. From power aspect, VS550 can work. But you need at least 2 6pin from psu, not 2 6pin on one wire.
It's like this right? This count as one, not two
I just find out that corsair VS550 only had one 6 pin from PSU. You need at least 2 separate connection from PSU.
Sorry dude, i didn't check the 6 pin availability. From power aspect, VS550 can work. But you need at least 2 6pin from psu, not 2 6pin on one wire.
It's like this right? This count as one, not two
Hi!
Is it not recommended?
It survive 1 night non-stop
should i turn off the miner?
Thanks for your reply!
God Bless!!!!!
No wonder the wire getting warm.
I just find out that corsair VS550 only had one 6 pin from PSU. You need at least 2 separate connection from PSU.
Sorry dude, i didn't check the 6 pin availability. From power aspect, VS550 can work. But you need at least 2 6pin from psu, not 2 6pin on one wire.
It's like this right? This count as one, not two
I just find out that corsair VS550 only had one 6 pin from PSU. You need at least 2 separate connection from PSU.
Sorry dude, i didn't check the 6 pin availability. From power aspect, VS550 can work. But you need at least 2 6pin from psu, not 2 6pin on one wire.
It's like this right? This count as one, not two
do you mean the 6pin? my PSU have 2 6pin only.
Yes. The two 6 pin already used on S3+ ?
Theoretical, two 6 pin is already enough.
But the warm wires are normal?
can i put like 2 fans to cool down the wires?
It's shouldn't warm in my opinion.
Did all 6 pin warm or only one 6 pin? If the 2 6pin had same warm temperature then, the connection is fine.
Just make sure it don't move to hot
Thank you very much!
God Bless!!!!!
do you mean the 6pin? my PSU have 2 6pin only.
Yes. The two 6 pin already used on S3+ ?
Theoretical, two 6 pin is already enough.
But the warm wires are normal?
can i put like 2 fans to cool down the wires?
It's shouldn't warm in my opinion.
Did all 6 pin warm or only one 6 pin? If the 2 6pin had same warm temperature then, the connection is fine.
Just make sure it don't move to hot
do you mean the 6pin? my PSU have 2 6pin only.
Yes. The two 6 pin already used on S3+ ?
Theoretical, two 6 pin is already enough.
But the warm wires are normal?
can i put like 2 fans to cool down the wires?
do you mean the 6pin? my PSU have 2 6pin only.
Yes. The two 6 pin already used on S3+ ?
Theoretical, two 6 pin is already enough.
Thank you very much, i will unplug the sata now.
By the way, what is the best pool for the Antminer S3+?
Sorry dude, i can't answer that since i don't own Antminer S3+
Ohhhh, its ok.
By the way is it normal that the wire turns warm?
Use 1 plug per connection. There is 4 pciex power plug right, so use 4 connection.
do you mean the 6pin? my PSU have 2 6pin only.
Thank you very much, i will unplug the sata now.
By the way, what is the best pool for the Antminer S3+?
Sorry dude, i can't answer that since i don't own Antminer S3+
Ohhhh, its ok.
By the way is it normal that the wire turns warm?
Use 1 plug per connection. There is 4 pciex power plug right, so use 4 connection.
Thank you very much, i will unplug the sata now.
By the way, what is the best pool for the Antminer S3+?
Sorry dude, i can't answer that since i don't own Antminer S3+
Ohhhh, its ok.
By the way is it normal that the wire turns warm?
Thank you very much, i will unplug the sata now.
By the way, what is the best pool for the Antminer S3+?
Sorry dude, i can't answer that since i don't own Antminer S3+
Did the PSU only supplying S3+ only or it's supplying other devices?
Hi!!!!!
Nope. It only supplying the S3+
Thank you very much for your reply!
Did the PSU shutdown too?
If yes, maybe you need to put some load on +5V rail. Try to find some devices that use +5V supply like old cdrom and plug it to your PSU.
OH MY alshdkajsdhkalsgdkahsgfahksf daquqqqqqq. it worked dude! IT WORKED!!!!!!!!!!!!!!!!
THANK YOU VERTY MUCH DUDE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ashdiasgdiqwydhg82t481hgeiwjdbaksd
God Bless!!!!!
Haha, i want to reply that you don't need the sata cable
Nice, gratz dude. Happy mining
Thank you very much, i will unplug the sata now.
By the way, what is the best pool for the Antminer S3+?
Did the PSU only supplying S3+ only or it's supplying other devices?
Hi!!!!!
Nope. It only supplying the S3+
Thank you very much for your reply!
Did the PSU shutdown too?
If yes, maybe you need to put some load on +5V rail. Try to find some devices that use +5V supply like old cdrom and plug it to your PSU.
OH MY alshdkajsdhkalsgdkahsgfahksf daquqqqqqq. it worked dude! IT WORKED!!!!!!!!!!!!!!!!
THANK YOU VERTY MUCH DUDE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ashdiasgdiqwydhg82t481hgeiwjdbaksd
God Bless!!!!!
Haha, i want to reply that you don't need the sata cable
Nice, gratz dude. Happy mining
Did the PSU only supplying S3+ only or it's supplying other devices?
Hi!!!!!
Nope. It only supplying the S3+
Thank you very much for your reply!
Did the PSU shutdown too?
If yes, maybe you need to put some load on +5V rail. Try to find some devices that use +5V supply like old cdrom and plug it to your PSU.
OH MY alshdkajsdhkalsgdkahsgfahksf daquqqqqqq. it worked dude! IT WORKED!!!!!!!!!!!!!!!!
THANK YOU VERTY MUCH DUDE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ashdiasgdiqwydhg82t481hgeiwjdbaksd
God Bless!!!!!
Did the PSU only supplying S3+ only or it's supplying other devices?
Hi!!!!!
Nope. It only supplying the S3+
Thank you very much for your reply!
Did the PSU shutdown too?
If yes, maybe you need to put some load on +5V rail. Try to find some devices that use +5V supply like old cdrom and plug it to your PSU.
Hi! My CD-ROM is set. do i need a SATA Cable?
Did the PSU only supplying S3+ only or it's supplying other devices?
Hi!!!!!
Nope. It only supplying the S3+
Thank you very much for your reply!
Did the PSU shutdown too?
If yes, maybe you need to put some load on +5V rail. Try to find some devices that use +5V supply like old cdrom and plug it to your PSU.
Yep, my PSU will shutdown. wait, im gonna find my old CD-ROM.
Thank you again very much!
God Bless!!!!!
Did the PSU only supplying S3+ only or it's supplying other devices?
Hi!!!!!
Nope. It only supplying the S3+
Thank you very much for your reply!
Did the PSU shutdown too?
If yes, maybe you need to put some load on +5V rail. Try to find some devices that use +5V supply like old cdrom and plug it to your PSU.
Did the PSU only supplying S3+ only or it's supplying other devices?
Hi!!!!!
Nope. It only supplying the S3+
Thank you very much for your reply!
Did the PSU only supplying S3+ or it's supplying other devices?
Anyone, please?
Is it DEAD? 
im complete newbie. Please, help me
Thanks advance for your help guys
God Bless!!!!!
This is my screenshot after the miner shutdown itself
http://prntscr.com/5i6v45
im complete newbie. Please, help me Thanks advance for your help guys
God Bless!!!!!
This is my screenshot after the miner shutdown itself
http://prntscr.com/5i6v45
Hi Forumers!
Please help me, my Antminer is always shutting down after like 2-3 minutes. after that i cant access the website.
I follow the Antminer S3+ Manual on Bitmain's website.
Is it defective?
Please do reply
Thanks advance
and
God Bless!!!!!
Please help me, my Antminer is always shutting down after like 2-3 minutes. after that i cant access the website.
I follow the Antminer S3+ Manual on Bitmain's website.
Is it defective?
Please do reply
Thanks advance
and
God Bless!!!!!
Have you set the ip address to static just in case there is a conflict on your LAN ?
How can i do that?
Thanks advance for the help
God Bless!!!!!
Hi Forumers!
Please help me, my Antminer is always shutting down after like 2-3 minutes. after that i cant access the website.
I follow the Antminer S3+ Manual on Bitmain's website.
Is it defective?
Please do reply
Thanks advance
and
God Bless!!!!!
Please help me, my Antminer is always shutting down after like 2-3 minutes. after that i cant access the website.
I follow the Antminer S3+ Manual on Bitmain's website.
Is it defective?
Please do reply
Thanks advance
and
God Bless!!!!!
Have you set the ip address to static just in case there is a conflict on your LAN ?
Hi Forumers!
Please help me, my Antminer is always shutting down after like 2-3 minutes. after that i cant access the website.
I follow the Antminer S3+ Manual on Bitmain's website.
Is it defective?
Please do reply
Thanks advance
and
God Bless!!!!!
Please help me, my Antminer is always shutting down after like 2-3 minutes. after that i cant access the website.
I follow the Antminer S3+ Manual on Bitmain's website.
Is it defective?
Please do reply
Thanks advance
and
God Bless!!!!!
Jump to: