Antminer s3 connecting problem | Bitcointalksearch.org

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: jmintuck02 on September 29, 2015, 01:16:34 PM

This thread has helped me so I know what to do when it is time "very soon, rubbing my palms together" to set up my Antminer S3. Yes, a just-bought S3.! The first one of mine. Can't wait to point it to Antpool. Or Hashnest.

Hashnest is actually a cloud based mining service offered by bitmain. It is not a pool, but I could see where it get's confusing. I do believe it uses anotpool on hashnest.

But yea not much effort at all and you can setup a S3 or any miner to mine on antpool.

jmintuck02

full member

Activity: 182

Merit: 100

★Bitvest.io★ Play Plinko or Invest!

This thread has helped me so I know what to do when it is time "very soon, rubbing my palms together" to set up my Antminer S3. Yes, a just-bought S3.! The first one of mine. Can't wait to point it to Antpool. Or Hashnest.

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: kabouter on September 08, 2015, 09:56:22 AM

Hi there

Thanks for your help!

The IP adress of the router is 192.168.0.1
Subnet is 255.255.255.0

The IP adress of the miner is 192.168.1.44
Subnet is 255.255.255.0

So the router and Antminer have allready the same Subnet?

Grz Wouter

This will not work you need to change the IP of the miner to match the router. But be careful when doing it. If you do it wrong it is a really big pain.

I suggest taking a screenshot before hitting apply on the IP changes. Really would help in so many cases.

RichBC

hero member

Activity: 588

Merit: 500

They are in different Subnets, so that is probably the problem.

When you are logged into the miner change the IP address of the miner to 192.168.0.44 and then reboot and everything should then be fine when you are connected to the Internet.

Rich

kabouter

newbie

Activity: 2

Merit: 0

Hi there

Thanks for your help!

The IP adress of the router is 192.168.0.1
Subnet is 255.255.255.0

The IP adress of the miner is 192.168.1.44
Subnet is 255.255.255.0

So the router and Antminer have allready the same Subnet?

Grz Wouter

RichBC

hero member

Activity: 588

Merit: 500

What is the IP address of the Router? If it is the same subnet as the miner, 192.168.1.x then everything should be fine. However if it is for instance 192.168.0.x then when you are logged into the miner change the Miners IP address (Static) to be in the same subnet as the Router, in this case 192.168.0.44

Rich

unholycactus

legendary

Activity: 1078

Merit: 1024

I don't understand why being connected to the internet would affect IPs on your home network.

Am I understanding correctly? If you type 192.168.1.44 while not connected to your ISP it works, but doesn't when you are?

Also, what do you mean changing the IP as described in the manuals? You should probably just keep the same IP if you're able to connect the first time.

kabouter

newbie

Activity: 2

Merit: 0

Hi!

Since four days i'm trying to setup an Antminer S3. I'm completely new to mining and have some questions. Hope you can help me out Cheesy

I have connected the miner and computer to a router.

When I fill in the miner's ip in the browser, the login page opens and I can login.

The problem is I can only reach the miner's page (by filling in it's ip in the browser) when the internet connection is down - I think because of the ip change I made to reach the miner. But when the internet connection is online I can not reach the miner via the browser.

Every time I change the ip settings as discribed in manuals, but than the internet connection is lost.

What could be the right settings? The Antminer's ip is 192.168.1.44

Thanks a lot!

Grz Wouter

Topic: Antminer s3 connecting problem (Read 1096 times)