Topic: Antminer S3 - CONSTANT RINGING and Incorrect TEMPS! (Read 1421 times)
There are already 30 S3 threads out there use one of them. https://bitcointalksearch.org/topic/guide-dogies-comprehensive-bitmain-antminer-s3-setup-hd-702653
Hi All,
Bought 2 S3. Arrived yesterday.
1. First one, turns on, immediately non-stop ringing. The ringing never stops.
2. Second one, turns on, no ringing, but the temperature of the first blade says 2C while the second is 44c. But both blades are working.
They are both being tested with the SAME Corsair 1000W PSU. The ringing is the worst part, but the temperature thing also concerns me.
Anyone know about this? I am not talking about the intermittent beep that happens, it happens on the second unit, but the first unit is constant ringing, non-stop.
Thoughts? BITMAIN why not answer this? I have emailed you as well, no response.
real1st
Bought 2 S3. Arrived yesterday.
1. First one, turns on, immediately non-stop ringing. The ringing never stops.
2. Second one, turns on, no ringing, but the temperature of the first blade says 2C while the second is 44c. But both blades are working.
They are both being tested with the SAME Corsair 1000W PSU. The ringing is the worst part, but the temperature thing also concerns me.
Anyone know about this? I am not talking about the intermittent beep that happens, it happens on the second unit, but the first unit is constant ringing, non-stop.
Thoughts? BITMAIN why not answer this? I have emailed you as well, no response.
real1st
Jump to: