Bitcoin Forum>Bitcoin>Mining>Mining support
Author

Topic: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected (Read 4184 times)

portleek
newbie
Activity: 1
Merit: 0
Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
January 23, 2017, 06:51:21 AM
#20
Hello Everybody
i have samo problém like you writing here.
here is LOG from antminer s3+
I have lates firmware from origin web support page..


does anybody some ideas? thank you very much!!!!!!!!!!!!!


Thu Jan  1 01:00:11 1970 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 803005b0, node_mem_map 81000000
Thu Jan  1 01:00:11 1970 kern.debug kernel: [    0.000000]   Normal zone: 128 pages used for memmap
Thu Jan  1 01:00:11 1970 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Thu Jan  1 01:00:11 1970 kern.debug kernel: [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
Thu Jan  1 01:00:11 1970 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Thu Jan  1 01:00:11 1970 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Thu Jan  1 01:00:11 1970 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Jan  1 01:00:11 1970 kern.debug kernel: [    0.000000] pcpu-alloc:
  • 0
Thu Jan  1 01:00:11 1970 kern.warn kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Thu Jan  1 01:00:11 1970 kern.notice kernel: [    0.000000] Kernel command line:  board=TL-WR741ND-v4 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.000000] Memory: 61336k/65536k available (2187k kernel code, 4200k reserved, 588k data, 232k init, 0k highmem)
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.000000] NR_IRQS:51
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.080000] pid_max: default: 32768 minimum: 301
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.080000] Mount-cache hash table entries: 512
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.090000] NET: Registered protocol family 16
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.100000] MIPS: machine is TP-LINK TL-WR741ND v4
Thu Jan  1 01:00:11 1970 kern.warn kernel: [    0.100000] MAC xxxxx
Thu Jan  1 01:00:11 1970 kern.warn kernel: [    0.100000] MAC xxxxx
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.560000] bio: create slab at 0
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.560000] Switching to clocksource MIPS
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.570000] NET: Registered protocol family 2
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.570000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.580000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.580000] TCP: Hash tables configured (established 512 bind 512)
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.590000] TCP: reno registered
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.590000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.600000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.610000] NET: Registered protocol family 1
Thu Jan  1 01:00:11 1970 kern.debug kernel: [    0.610000] PCI: CLS 0 bytes, default 32
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.630000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.630000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.640000] msgmni has been set to 119
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.650000] io scheduler noop registered
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.650000] io scheduler deadline registered (default)
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.650000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.660000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.670000] console [ttyATH0] enabled, bootconsole disabled
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.680000] ath79-spi ath79-spi: master is unqueued, this is deprecated
Thu Jan  1 01:00:11 1970 kern.warn kernel: [    0.690000] m25p80 spi0.0: found gd25q64, expected m25p80
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.690000] m25p80 spi0.0: gd25q64 (8192 Kbytes)
Thu Jan  1 01:00:11 1970 kern.notice kernel: [    0.700000] 5 tp-link partitions found on MTD device spi0.0
Thu Jan  1 01:00:11 1970 kern.notice kernel: [    0.700000] Creating 5 MTD partitions on "spi0.0":
Thu Jan  1 01:00:11 1970 kern.notice kernel: [    0.710000] 0x000000000000-0x000000020000 : "u-boot"
Thu Jan  1 01:00:11 1970 kern.notice kernel: [    0.710000] 0x000000020000-0x000000117dd4 : "kernel"
Thu Jan  1 01:00:11 1970 kern.warn kernel: [    0.720000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Thu Jan  1 01:00:11 1970 kern.notice kernel: [    0.730000] 0x000000117dd4-0x0000007f0000 : "rootfs"
Thu Jan  1 01:00:11 1970 kern.warn kernel: [    0.730000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Thu Jan  1 01:00:11 1970 kern.notice kernel: [    0.750000] mtd: partition "rootfs" set to be root filesystem
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.750000] mtd: partition "rootfs_data" created automatically, ofs=0x370000, len=0x480000
Thu Jan  1 01:00:11 1970 kern.notice kernel: [    0.760000] 0x000000370000-0x0000007f0000 : "rootfs_data"
Thu Jan  1 01:00:11 1970 kern.notice kernel: [    0.770000] 0x000000020000-0x0000007f0000 : "firmware"
Thu Jan  1 01:00:11 1970 kern.notice kernel: [    0.770000] 0x0000007f0000-0x000000800000 : "art"
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.790000] libphy: ag71xx_mdio: probed
Thu Jan  1 01:00:11 1970 kern.info kernel: [    0.800000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
Thu Jan  1 01:00:11 1970 kern.info kernel: [    1.350000] eth0: Found an AR7240/AR9330 built-in switch
Thu Jan  1 01:00:11 1970 kern.info kernel: [    2.390000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
Thu Jan  1 01:00:11 1970 kern.info kernel: [    2.940000] ag71xx ag71xx.0 eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
Thu Jan  1 01:00:11 1970 kern.info kernel: [    2.950000] TCP: cubic registered
Thu Jan  1 01:00:11 1970 kern.info kernel: [    2.950000] NET: Registered protocol family 17
Thu Jan  1 01:00:11 1970 kern.info kernel: [    2.960000] 8021q: 802.1Q VLAN Support v1.8
Thu Jan  1 01:00:11 1970 kern.info kernel: [    2.970000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Thu Jan  1 01:00:11 1970 kern.info kernel: [    2.980000] Freeing unused kernel memory: 232K (80316000 - 80350000)
Thu Jan  1 01:00:11 1970 kern.info kernel: [    5.740000] usbcore: registered new interface driver usbfs
Thu Jan  1 01:00:11 1970 kern.info kernel: [    5.740000] usbcore: registered new interface driver hub
Thu Jan  1 01:00:11 1970 kern.info kernel: [    5.750000] usbcore: registered new device driver usb
Thu Jan  1 01:00:11 1970 kern.info kernel: [    5.760000] usbcore: registered new interface driver bitmain
Thu Jan  1 01:00:11 1970 kern.warn kernel: [    5.760000] hash ok
Thu Jan  1 01:00:11 1970 kern.warn kernel: [    5.760000] hashtest OK
Thu Jan  1 01:00:11 1970 kern.err kernel: [    5.770000] bitmain-asic: success to register device
Thu Jan  1 01:00:11 1970 kern.info kernel: [    5.770000] usbcore: registered new interface driver bitmainbl
Thu Jan  1 01:00:11 1970 kern.info kernel: [    5.780000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Jan  1 01:00:11 1970 kern.info kernel: [    5.790000] ehci-platform: EHCI generic platform driver
Thu Jan  1 01:00:11 1970 kern.info kernel: [    5.790000] ehci-platform ehci-platform: EHCI Host Controller
Thu Jan  1 01:00:11 1970 kern.info kernel: [    5.800000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Thu Jan  1 01:00:11 1970 kern.info kernel: [    5.810000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Thu Jan  1 01:00:11 1970 kern.info kernel: [    5.830000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Thu Jan  1 01:00:11 1970 kern.info kernel: [    5.830000] hub 1-0:1.0: USB hub found
Thu Jan  1 01:00:11 1970 kern.info kernel: [    5.830000] hub 1-0:1.0: 1 port detected
Thu Jan  1 01:00:11 1970 kern.info kernel: [    6.160000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Thu Jan  1 01:00:11 1970 kern.info kernel: [    6.310000] hub 1-1:1.0: USB hub found
Thu Jan  1 01:00:11 1970 kern.info kernel: [    6.310000] hub 1-1:1.0: 2 ports detected
Thu Jan  1 01:00:11 1970 kern.info kernel: [    6.600000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
Thu Jan  1 01:00:11 1970 kern.info kernel: [    6.730000] bitmainbl 1-1.1:1.0: USB Bitmain bootloader device now attached to USB Bitmain bootloader-0
Thu Jan  1 01:00:11 1970 kern.warn kernel: [    6.740000] PIC microchip bootloader usb OK
Thu Jan  1 01:00:11 1970 kern.notice kernel: [   10.510000] jffs2: notice: (328) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 17 of xref (0 dead, 2 orphan) found.
Fri Jan 20 16:21:00 2017 daemon.info sysinit: Fri Jan 20 15:21:00 UTC 2017
Fri Jan 20 16:21:00 2017 user.emerg syslog: kmodloader: loading kernel modules from /etc/modules.d/**
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.020000] hidraw: raw HID events driver (C) Jiri Kosina
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.030000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.040000] Backport generated by backports.git backports-20130617-4-ge3220f5
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.050000] nf_conntrack version 0.5.0 (962 buckets, 3848 max)
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.080000] usbcore: registered new interface driver usbhid
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.080000] usbhid: USB HID core driver
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.090000] usbcore: registered new interface driver usbserial
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.090000] usbcore: registered new interface driver usbserial_generic
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.100000] usbserial: USB Serial support registered for generic
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.130000] xt_time: kernel timezone is -0000
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.160000] cfg80211: Calling CRDA to update world regulatory domain
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.160000] cfg80211: World regulatory domain updated:
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.170000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.170000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.180000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.190000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.200000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.200000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.220000] ip_tables: (C) 2000-2006 Netfilter Core Team
Fri Jan 20 16:21:00 2017 kern.debug kernel: [   13.360000] ath: EEPROM regdomain: 0x0
Fri Jan 20 16:21:00 2017 kern.debug kernel: [   13.360000] ath: EEPROM indicates default country code should be used
Fri Jan 20 16:21:00 2017 kern.debug kernel: [   13.360000] ath: doing EEPROM country->regdmn map search
Fri Jan 20 16:21:00 2017 kern.debug kernel: [   13.360000] ath: country maps to regdmn code: 0x3a
Fri Jan 20 16:21:00 2017 kern.debug kernel: [   13.360000] ath: Country alpha2 being used: US
Fri Jan 20 16:21:00 2017 kern.debug kernel: [   13.360000] ath: Regpair used: 0x3a
Fri Jan 20 16:21:00 2017 kern.debug kernel: [   13.360000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.380000] cfg80211: Calling CRDA for country: US
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.380000] cfg80211: Regulatory domain changed to country: US
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.390000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.400000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.410000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.410000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.420000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.430000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.440000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Fri Jan 20 16:21:00 2017 kern.info kernel: [   13.450000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Fri Jan 20 16:21:00 2017 user.info syslog: ran 16 iterations
Fri Jan 20 16:21:00 2017 daemon.info sysinit: kmod: ran 16 iterations
Fri Jan 20 16:21:04 2017 daemon.notice netifd: Interface 'loopback' is now up
Fri Jan 20 16:21:05 2017 cron.info crond[578]: crond: crond (busybox 1.19.4) started, log level 8
Fri Jan 20 16:21:05 2017 daemon.notice netifd: wan (583): udhcpc (v1.19.4) started
Fri Jan 20 16:21:05 2017 daemon.notice netifd: wan (583): Sending discover...
Fri Jan 20 16:21:06 2017 authpriv.info dropbear[598]: Not backgrounding
Fri Jan 20 16:21:07 2017 kern.info kernel: [   20.180000] eth1: link up (100Mbps/Full duplex)
Fri Jan 20 16:21:07 2017 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Fri Jan 20 16:21:07 2017 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Fri Jan 20 16:21:08 2017 daemon.info dnsmasq[655]: started, version 2.66 cachesize 150
Fri Jan 20 16:21:08 2017 daemon.info dnsmasq[655]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth
Fri Jan 20 16:21:08 2017 daemon.info dnsmasq[655]: using local addresses only for domain lan
Fri Jan 20 16:21:08 2017 daemon.warn dnsmasq[655]: no servers found in /tmp/resolv.conf.auto, will retry
Fri Jan 20 16:21:08 2017 daemon.info dnsmasq[655]: read /etc/hosts - 1 addresses
Fri Jan 20 16:21:08 2017 daemon.info sysinit: /etc/config/miner_pic.hex
Fri Jan 20 16:21:08 2017 kern.warn kernel: [   20.720000] no int in filled
Fri Jan 20 16:21:08 2017 daemon.info sysinit: pic update
Fri Jan 20 16:21:08 2017 daemon.info sysinit: open /dev/bitmainbl0 ok fd = 0x3
Fri Jan 20 16:21:08 2017 daemon.info sysinit: read data
Fri Jan 20 16:21:08 2017 daemon.info sysinit:
  • {0x1}, [1]{0x10}, [2]{0x1}, [3]{0x10}, [4]{0x1}, [5]{0}, [6]{0x10}, [7]{0x1}, [8]{0x10}, [9]{0x4}, [10]{0x4},
Fri Jan 20 16:21:08 2017 daemon.info sysinit: Version 1.0
Fri Jan 20 16:21:08 2017 daemon.info sysinit: open pic update file fail
Fri Jan 20 16:21:08 2017 daemon.info sysinit: Control bootloader to app
Fri Jan 20 16:21:08 2017 daemon.info sysinit: setting up led WAN
Fri Jan 20 16:21:08 2017 daemon.info sysinit: setting up led WANL
Fri Jan 20 16:21:08 2017 daemon.info sysinit: setting up led LAN1
Fri Jan 20 16:21:08 2017 daemon.info sysinit: setting up led LAN2
Fri Jan 20 16:21:08 2017 daemon.info sysinit: setting up led LAN3
Fri Jan 20 16:21:08 2017 daemon.info sysinit: setting up led LAN4
Fri Jan 20 16:21:08 2017 daemon.info sysinit: setting up led WLAN
Fri Jan 20 16:21:08 2017 daemon.notice netifd: wan (583): Sending discover...
Fri Jan 20 16:21:08 2017 daemon.notice netifd: wan (583): Sending select for 10.123.25.129...
Fri Jan 20 16:21:09 2017 daemon.notice netifd: wan (583): Lease of 10.123.25.129 obtained, lease time 1209600
Fri Jan 20 16:21:09 2017 kern.info kernel: [   22.230000] usb 1-1.1: USB disconnect, device number 3
Fri Jan 20 16:21:09 2017 kern.info kernel: [   22.360000] bitmainbl 1-1.1:1.0: USB Bitmain asic #0 now disconnected
Fri Jan 20 16:21:09 2017 daemon.notice netifd: Interface 'wan' is now up
Fri Jan 20 16:21:10 2017 kern.info kernel: [   22.900000] usb 1-1.1: new full-speed USB device number 4 using ehci-platform
Fri Jan 20 16:21:10 2017 kern.info kernel: [   23.070000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
Fri Jan 20 16:21:10 2017 kern.warn kernel: [   23.080000] PIC microchip usb OK
Fri Jan 20 16:21:10 2017 user.notice firewall: Reloading firewall due to ifup of wan (eth1)
Fri Jan 20 16:21:11 2017 daemon.info sysinit: --bitmain-options 115200:32:8:18:225:0882 -o stratum+tcp://stratum.antpool.com:3333 -
Fri Jan 20 16:21:11 2017 daemon.info sysinit: - init complete -
Fri Jan 20 16:21:11 2017 kern.info kernel: [   24.430000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
Fri Jan 20 16:21:14 2017 daemon.info dnsmasq[655]: reading /tmp/resolv.conf.auto
Fri Jan 20 16:21:14 2017 daemon.info dnsmasq[655]: using nameserver 10.123.25.1#53
Fri Jan 20 16:21:14 2017 daemon.info dnsmasq[655]: using local addresses only for domain lan
Mon Jan 23 12:44:28 2017 cron.err crond[578]: time disparity of 4103 minutes detected
Mon Jan 23 12:45:01 2017 cron.info crond[578]: crond: USER root pid 828 cmd /usr/bin/cgminer-monitor
BTCIRV
member
Activity: 65
Merit: 10
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
October 12, 2014, 08:07:22 PM
#19
damn, rolled it back, moved it forward. Same thing.
BTCIRV
member
Activity: 65
Merit: 10
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
October 12, 2014, 07:39:30 PM
#18
Quote from: nocroom on October 12, 2014, 07:30:03 PM
Same steps, then head up on firmware


What do you mean? I rolled it back to the previous one... same issues still.
nocroom
sr. member
Activity: 280
Merit: 250
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
October 12, 2014, 07:30:03 PM
#17
Same steps, then head up on firmware

BTCIRV
member
Activity: 65
Merit: 10
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
October 12, 2014, 07:27:00 PM
#16
Spoke too soon. It's already doing it again. I'll have to go back to an earlier firmware
nocroom
sr. member
Activity: 280
Merit: 250
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
October 12, 2014, 07:21:27 PM
#15
Haha... Ur welcome
BTCIRV
member
Activity: 65
Merit: 10
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
October 12, 2014, 07:12:53 PM
#14
Quote from: nocroom on October 12, 2014, 07:09:25 PM
Shutdown "unplug" until the fans stop spinning then replug power again and try get in before starts hashing

OMG! It worked! You're my hero for today.
BTCIRV
member
Activity: 65
Merit: 10
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
October 12, 2014, 07:10:23 PM
#13
Quote from: BTCIRV on October 12, 2014, 07:07:44 PM
Quote from: nocroom on October 12, 2014, 07:06:47 PM
Overwrite it, and check box to save settings


Should work same thing happen to me


Right now it's not even letting me get to the "system" page so that I can click the backup/firmware link... damnit.



Finally!
nocroom
sr. member
Activity: 280
Merit: 250
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
October 12, 2014, 07:09:25 PM
#12
Shutdown "unplug" until the fans stop spinning then replug power again and try get in before starts hashing
BTCIRV
member
Activity: 65
Merit: 10
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
October 12, 2014, 07:07:44 PM
#11
Quote from: nocroom on October 12, 2014, 07:06:47 PM
Overwrite it, and check box to save settings


Should work same thing happen to me


Right now it's not even letting me get to the "system" page so that I can click the backup/firmware link... damnit.
nocroom
sr. member
Activity: 280
Merit: 250
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
October 12, 2014, 07:06:47 PM
#10
Overwrite it, and check box to save settings


Should work same thing happen to me
BTCIRV
member
Activity: 65
Merit: 10
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
October 12, 2014, 07:05:09 PM
#9
Quote from: nocroom on October 12, 2014, 06:29:54 PM
Quote from: BTCIRV on October 12, 2014, 06:27:01 PM
hi, I keep getting HTML errors from my S3... started this week. I've changed nothing on it. Does anyone know how to fix this?

Quote
XML Parsing Error: unclosed token Location: http://192.168.1.13/cgi-bin/luci/;stok=13213c88b5ecf19db8f9659f491ff403/admin/status/minerstatus/ Line Number 216, Column 1:
nocroom
sr. member
Activity: 280
Merit: 250
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
October 12, 2014, 06:29:54 PM
#8
Quote from: BTCIRV on October 12, 2014, 06:27:01 PM
hi, I keep getting HTML errors from my S3... started this week. I've changed nothing on it. Does anyone know how to fix this?

Quote
XML Parsing Error: unclosed token Location: http://192.168.1.13/cgi-bin/luci/;stok=13213c88b5ecf19db8f9659f491ff403/admin/status/minerstatus/ Line Number 216, Column 1:
BTCIRV
member
Activity: 65
Merit: 10
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
October 12, 2014, 06:27:01 PM
#7
hi, I keep getting HTML errors from my S3... started this week. I've changed nothing on it. Does anyone know how to fix this?

Quote
XML Parsing Error: unclosed token Location: http://192.168.1.13/cgi-bin/luci/;stok=13213c88b5ecf19db8f9659f491ff403/admin/status/minerstatus/ Line Number 216, Column 1:
nocroom
sr. member
Activity: 280
Merit: 250
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
August 21, 2014, 09:15:45 PM
#6
now is down to 5 mins

Quote
[    0.000000] Linux version 3.10.12 (xxl@ubuntu) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r38031) ) #167 Mon Aug 11 14:47:09 CST 2014
[    0.000000] MyLoader: sysp=1bec2fee, boardp=fdd6ef6f, parts=fc031564
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 803005b0, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc:
  • 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  board=TL-WR741ND-v4 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 61336k/65536k available (2187k kernel code, 4200k reserved, 588k data, 232k init, 0k highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.100000] MIPS: machine is TP-LINK TL-WR741ND v4
[    0.100000] MAC FF:FF:FF:FF:FF:FF
[    0.100000] MAC 20:59:a0:c3:c3:80
[    0.560000] bio: create slab at 0
[    0.560000] Switching to clocksource MIPS
[    0.570000] NET: Registered protocol family 2
[    0.570000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.580000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.580000] TCP: Hash tables configured (established 512 bind 512)
[    0.590000] TCP: reno registered
[    0.590000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.600000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.610000] NET: Registered protocol family 1
[    0.610000] PCI: CLS 0 bytes, default 32
[    0.630000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.630000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.640000] msgmni has been set to 119
[    0.650000] io scheduler noop registered
[    0.650000] io scheduler deadline registered (default)
[    0.650000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.660000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[    0.670000] console [ttyATH0] enabled, bootconsole disabled
[    0.680000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[    0.690000] m25p80 spi0.0: found gd25q64, expected m25p80
[    0.690000] m25p80 spi0.0: gd25q64 (8192 Kbytes)
[    0.700000] 5 tp-link partitions found on MTD device spi0.0
[    0.700000] Creating 5 MTD partitions on "spi0.0":
[    0.710000] 0x000000000000-0x000000020000 : "u-boot"
[    0.710000] 0x000000020000-0x000000117d64 : "kernel"
[    0.720000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.730000] 0x000000117d64-0x0000007f0000 : "rootfs"
[    0.730000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.750000] mtd: partition "rootfs" set to be root filesystem
[    0.750000] mtd: partition "rootfs_data" created automatically, ofs=0x370000, len=0x480000
[    0.760000] 0x000000370000-0x0000007f0000 : "rootfs_data"
[    0.770000] 0x000000020000-0x0000007f0000 : "firmware"
[    0.770000] 0x0000007f0000-0x000000800000 : "art"
[    0.790000] libphy: ag71xx_mdio: probed
[    0.800000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[    1.350000] eth0: Found an AR7240/AR9330 built-in switch
[    2.390000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    2.940000] ag71xx ag71xx.0 eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    2.950000] TCP: cubic registered
[    2.950000] NET: Registered protocol family 17
[    2.960000] 8021q: 802.1Q VLAN Support v1.8
[    2.970000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    2.980000] Freeing unused kernel memory: 232K (80316000 - 80350000)
[    5.740000] usbcore: registered new interface driver usbfs
[    5.740000] usbcore: registered new interface driver hub
[    5.750000] usbcore: registered new device driver usb
[    5.760000] usbcore: registered new interface driver bitmain
[    5.760000] hash ok
[    5.760000] hashtest OK
[    5.770000] bitmain-asic: success to register device
[    5.770000] usbcore: registered new interface driver bitmainbl
[    5.780000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.790000] ehci-platform: EHCI generic platform driver
[    5.790000] ehci-platform ehci-platform: EHCI Host Controller
[    5.800000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    5.810000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    5.830000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    5.830000] hub 1-0:1.0: USB hub found
[    5.830000] hub 1-0:1.0: 1 port detected
[    6.180000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    6.330000] hub 1-1:1.0: USB hub found
[    6.330000] hub 1-1:1.0: 2 ports detected
[    6.620000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
[    6.750000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[    6.760000] PIC microchip usb OK
[   10.510000] jffs2: notice: (327) jffs2_build_xattr_subsystem: complete building xattr subsystem, 26 of xdatum (0 unchecked, 25 orphan) and 43 of xref (0 dead, 28 orphan) found.
[   12.860000] hidraw: raw HID events driver (C) Jiri Kosina
[   12.860000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
[   12.870000] Backport generated by backports.git backports-20130617-4-ge3220f5
[   12.890000] nf_conntrack version 0.5.0 (962 buckets, 3848 max)
[   12.910000] usbcore: registered new interface driver usbhid
[   12.910000] usbhid: USB HID core driver
[   12.920000] usbcore: registered new interface driver usbserial
[   12.930000] usbcore: registered new interface driver usbserial_generic
[   12.930000] usbserial: USB Serial support registered for generic
[   12.960000] xt_time: kernel timezone is -0000
[   13.000000] cfg80211: Calling CRDA to update world regulatory domain
[   13.000000] cfg80211: World regulatory domain updated:
[   13.010000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.010000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.020000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.030000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.040000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.040000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.060000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.190000] ath: EEPROM regdomain: 0x0
[   13.190000] ath: EEPROM indicates default country code should be used
[   13.190000] ath: doing EEPROM country->regdmn map search
[   13.190000] ath: country maps to regdmn code: 0x3a
[   13.190000] ath: Country alpha2 being used: US
[   13.190000] ath: Regpair used: 0x3a
[   13.200000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.210000] cfg80211: Calling CRDA for country: US
[   13.220000] cfg80211: Regulatory domain changed to country: US
[   13.220000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.230000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   13.240000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   13.240000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.250000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.260000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.270000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   13.280000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   18.040000] device eth0 entered promiscuous mode
[   20.210000] eth1: link up (100Mbps/Full duplex)
[   21.440000] usb 1-1.1: USB disconnect, device number 3
[   21.440000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[   21.710000] usb 1-1.1: new full-speed USB device number 4 using ehci-platform
[   21.870000] bitmainbl 1-1.1:1.0: USB Bitmain bootloader device now attached to USB Bitmain bootloader-0
[   21.870000] PIC microchip bootloader usb OK
[   31.280000] no int in filled
[   32.860000] usb 1-1.1: USB disconnect, device number 4
[   32.860000] bitmainbl 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[   33.180000] usb 1-1.1: new full-speed USB device number 5 using ehci-platform
[   33.320000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[   33.330000] PIC microchip usb OK
[   36.370000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[   36.790000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[   36.790000] PIC microchip usb OK
[   75.820000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[   76.240000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[   76.240000] PIC microchip usb OK
[   79.520000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[  319.050000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[  490.190000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 1205.390000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 1217.340000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 1243.180000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 1243.400000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 1451.710000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[ 1451.710000] PIC microchip usb OK
[ 1513.840000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[ 1546.150000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 1605.210000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 1605.430000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 1631.550000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 1631.770000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 1631.990000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 1632.210000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 1632.440000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 1676.760000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 1832.430000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 2801.280000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 2857.210000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 4697.810000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[ 4697.810000] PIC microchip usb OK
[ 4754.040000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[ 4754.350000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[ 4754.360000] PIC microchip usb OK
[ 4757.630000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[ 4876.390000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 4920.550000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 4923.440000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 4923.690000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 4923.910000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 5167.570000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 5167.790000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 5168.020000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 5365.740000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 5511.870000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 5701.260000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 5923.500000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 5923.720000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 6048.220000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 6048.440000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 6048.660000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 6058.190000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 6191.560000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 6191.780000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 6374.400000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[ 6374.410000] PIC microchip usb OK
[ 6377.680000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[ 6554.410000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[ 6554.410000] PIC microchip usb OK
[ 6557.690000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[ 7457.310000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 7457.530000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 7457.740000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[ 7638.130000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[ 7638.130000] PIC microchip usb OK
[ 7705.160000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[ 9074.010000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[10034.610000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[10567.910000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[10685.800000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[11165.190000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[11234.200000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[12370.240000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[12512.110000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[12857.390000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[12857.400000] PIC microchip usb OK
[12921.090000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[13192.800000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[13266.360000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[13266.570000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[13266.790000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[13784.230000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[13821.000000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[13821.000000] PIC microchip usb OK
[13933.480000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[16273.950000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[16273.950000] PIC microchip usb OK
[16277.230000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[16545.050000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[17714.020000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[17714.030000] PIC microchip usb OK
[17717.300000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[18256.710000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[18256.720000] PIC microchip usb OK
[18433.730000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[19877.770000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[19877.780000] PIC microchip usb OK
[20053.790000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[20312.820000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[20642.450000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[21043.950000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[21134.130000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[21134.140000] PIC microchip usb OK
[21137.410000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[21425.030000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[21509.960000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[21725.360000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[21854.190000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[21854.200000] PIC microchip usb OK
[21857.470000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[25278.090000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[25278.100000] PIC microchip usb OK
[25416.980000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[25421.210000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[25421.210000] PIC microchip usb OK
[25424.500000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[26897.170000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[26897.180000] PIC microchip usb OK
[27073.190000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[32880.430000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[32881.830000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[34521.420000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[35081.420000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[36203.480000] usb 1-1.1: reset full-speed USB device number 5 using ehci-platform
[37697.910000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[37697.920000] PIC microchip usb OK
[37825.280000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[38957.970000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[38957.980000] PIC microchip usb OK
[38989.900000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[39858.030000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[39858.040000] PIC microchip usb OK
nocroom
sr. member
Activity: 280
Merit: 250
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
August 21, 2014, 05:52:35 PM
#5
Quote from: xjack on August 21, 2014, 05:50:08 PM
fwiw, my kernel logs show that asic disconnected message on all units, they all hash fine.

after i reset that one s3 all works for a good 4hrs before i get a beeping and the logs
xjack
hero member
Activity: 539
Merit: 500
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
August 21, 2014, 05:50:08 PM
#4
fwiw, my kernel logs show that asic disconnected message on all units, they all hash fine.
nocroom
sr. member
Activity: 280
Merit: 250
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
August 21, 2014, 05:12:59 PM
#3
Quote from: Vikingfr on August 21, 2014, 04:56:17 PM
I got this error on a S1 before I change for a better PSU...

Don't think is that, I'm running server 1800w psu on per three s3's , the other two running fine on same PSU.


Humm.
Vikingfr
newbie
Activity: 29
Merit: 0
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
August 21, 2014, 04:56:17 PM
#2
I got this error on a S1 before I change for a better PSU...
nocroom
sr. member
Activity: 280
Merit: 250
Re: Antminer S3 Error: bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
August 21, 2014, 10:16:23 AM
#1
I noticed an alarm going off one of the boxes, and stopped mining even after reboot. Checked error logs (view below) can someone tell what can cause this? thanks

Quote
Thu Aug 21 11:07:20 2014 kern.info kernel: [   32.860000] usb 1-1.1: USB disconnect, device number 4
Thu Aug 21 11:07:20 2014 kern.info kernel: [   32.860000] bitmainbl 1-1.1:1.0: USB Bitmain asic #0 now disconnected
Thu Aug 21 11:07:20 2014 kern.info kernel: [   33.180000] usb 1-1.1: new full-speed USB device number 5 using ehci-platform
Thu Aug 21 11:07:20 2014 kern.info kernel: [   33.320000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
Thu Aug 21 11:07:20 2014 kern.warn kernel: [   33.330000] PIC microchip usb OK
Thu Aug 21 11:07:23 2014 daemon.info sysinit: --bitmain-options 115200:32:8:17:237.5:1286 -o stratum.btcguild.com:3333 -O xxxx:xxxxx --bitmain-notempoverctrl --bitmain-nobeeper --api-listen --api-network --bitmain-checkn2diff --bitmain-hwerror --version-file /usr/bin/compile_time --queue 4096
Thu Aug 21 11:07:23 2014 daemon.info sysinit: - init complete -
Thu Aug 21 11:07:23 2014 kern.info kernel: [   36.370000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
Thu Aug 21 11:07:24 2014 kern.info kernel: [   36.790000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
Thu Aug 21 11:07:24 2014 kern.warn kernel: [   36.790000] PIC microchip usb OK
Thu Aug 21 11:09:03 2014 cron.info crond[575]: crond: USER root pid 875 cmd /usr/bin/cgminer-monitor
Thu Aug 21 11:09:05 2014 kern.info kernel: [   75.820000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
Thu Aug 21 11:09:05 2014 kern.info kernel: [   76.240000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
Thu Aug 21 11:09:05 2014 kern.warn kernel: [   76.240000] PIC microchip usb OK
Thu Aug 21 11:09:08 2014 kern.info kernel: [   79.520000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected


got the miner working again by wiping settings and re-installing firmware
Bitcoin Forum>Bitcoin>Mining>Mining support
Jump to:
© 2020, Bitcointalksearch.org