Author

Topic: ANTMINER S3 FIRMWARE AND S3+ LAST FIRMWARE COMPATIBILITIES (Read 7211 times)

legendary
Activity: 1456
Merit: 1000
won't overclocking damage and destroy the miner?

If done properly no.   You slowly go up and base it on your mining area heat.  You do not want ton's of heat from OC gear.

But if you do it wrong and just OC the crap out of it yes you can destroy chips, which hurts miner.
newbie
Activity: 53
Merit: 0
won't overclocking damage and destroy the miner?
hero member
Activity: 574
Merit: 500
237.5 mhz is the best frec for a S3, mine are runing cold (39 - 40) : hashrate 450 - 460
hero member
Activity: 518
Merit: 501
Any updates on how using the s3+ benefitted on your machine? 
full member
Activity: 174
Merit: 100
I just updated my firmware as well. to the s3+ firmware

I dont see any issues

Got a slight increase in GH/s

No x's

I have both a s3 and s3+

my s3 runs 44C
my s3 runs 42c

And my s3 performs more average GH than my s3+ My s3 was the last batch before the s3+
hero member
Activity: 518
Merit: 500
Why did you flash the firmware? Did you have any issues before?
Look at this thread, overclocking S3 batch 6 with stock firmware to freq 262.5

https://bitcointalksearch.org/topic/antminer-s3-batch-6-overclocking-750220

If it ain't broke, don't fix it!
newbie
Activity: 15
Merit: 0
WELL.... WELL... I HAVE FLASHED LAST S3+ BATCH 9 FIRMWAERE INTO MY S3 BATCH 7...

GUESS...

IT WORKS!!!

UFFF!!! I CAN BREATH AGAIN...

PLEASE SEE THE FOLLOWING IMAGE

http://i941.photobucket.com/albums/ad259/JFARBOLEDA/CAPTURARECORTADAANTMINERS3_zpsb153a5c4.png

YOU CAN SEE THE MULTIPLE VARIANTS IN FREQ SETTINGS

I USE TU USE THE 237.5 AND I CAN SEE THE MINER COLD (40... 41 CELSIUS) AND QUIET... HASH RATE 440... 470...

I AM TRYING NOW 243.75 AND I CAN SEE THE MINER A LITTLE HOTTER (42... 43 CELSIUS) QUIET... HASH RATE 460... 480... BUT AN "x" IN A ROW...

PLEASE WAIT... TOMORROW I WILL TELL YOU DETAILS...

THANKS!!!
newbie
Activity: 15
Merit: 0
HI FRIENDS!

WHO KNOWS IF LAST ANTMINER S3+(BATCH 9) FIRMWARE IS SAFE (COMPATIBLE) WITH ANTMINER S3 (BATCH 7) ?

PLEASE REVIEW THE FOLLOWING

(antMiner_S320140826.bin) (support S3+ MD5: 48B2E769E1B57892B71D488711773002)

https://www.bitmaintech.com/support.htm?pid=007201407180243004432lBQW28O0633


THANKS!
Jump to: