Topic: Antminer S3+ is junk and no support from BITMAIN (Read 3064 times)

Seems to me this thread should be locked. OP seems to have gotten their issues fixed. And others also. Bitmain proved responsive and the thread is not marked solved or anything.

i am glad to say my case is finally closed to my satisfaction.

thank you BITMAIN_janet.

Dont give up, persistence is key.

No, certain components like customised controllers and hashing boards aren't going to be made again unless there is a serious problem / shortfall.

Did BITMAIN loose the contact to the supplier making them?

No... I was just explaining why they're not advertised for open sale on the webstore. Its not acceptable to run out of limited components and so there has to be tight control on giving them out.

https://bitcointalksearch.org/topic/m.9890239 have a look here, that's the problem I'm having

What are you talking? Please give any proof/source for not totally making that up.
Do you actually get paid by the posting?

I got contacted by BITMAINTECH - let's give this another try.

You have just been sent a personal message by dbm74 on Bitcoin Forum.

IMPORTANT: Remember, this is just a notification. Please do not reply to this email.

The message they sent you was:

i have 26 s3's and my s3' were crashing many times a day thy were working good and then crash down to 40 gh/s i have been working on this problem for a month and finely fixed them.
if you had flashed bitmains last firmware 1226 thats the problem and reset wont work and if you flash back to earlier program it crashes the miner and is un bootable.
i am willing to enplane step by step how to recover the unbootable miner and flash crashing miners back to good firmware with success. bitmain is making tones of btc telling people the control boards are bad just like thy told me and i fixed it. it took me three hrs to set up and figure it out and now that im setup it only takes 15 minuts to fix a crashed s3's.
if you want the help i can give it and in return it would be nice to get a btc donation for saving you tons of time and money

They're not for open sale as it were and more reserve stock for warranties or customers in need. Opening up the sale of spares that aren't for still in production miners risks not being able to service warranty replacements because people tend to hoard.

Hi. What's the regular price of a controller board? Why not make them available in the webshop/resellers? Many people are left in the rain with exactly the same problem... bricked controller board.

@el_rlee,

Messaged him to contact you.  Give him a half a day or a full day to reach out to you, it is Sunday for him

FYI to ALL

Warranty for Bitmain Antminer Products come with 90-day parts replacement warranty to the original purchaser. 

If the warranty expires, the replacement parts may be available for purchase.

If you were not the purchaser or the new owner of the second hand products... 

Parts priority may go to the current in-warranty customer, then expired warranty customer, and the 3rd party customer who wants to purchase parts to provide services to others.

I did.
Several emails with a Yoshi Goto...


My answer:


No answer no anymore... that was it.

PM us with your purchase detail from Bitmaintech.com

If your warranty is over (90-days), then we can offer you the parts for purchase.

BitmainWarranty is the RMA / technical contact for international sales. You don't have a technical problem, you have an order dispute which requires sales / admin (BITMAIN).

if bitmainwarranty 'IS' bitmain, why would 'bitmainwarranty' advise me to contact bitmain??

dogie seems to 'know' precisely nothing.

i have now been contacted by 'bitmain_janet' with an offer of compensation, 6 months late but still appreciated.

Thank you for your reconsideration of the matter.

Unfortunately you seem to have overlooked the three (3) blades that were also part of the same issue. Valued by BITMAIN  China at 100USD each.

Also, if we had closed the matter in June as agreed, then the June BTC value would indeed be acceptable.

Instead you opted to cause us all much frustration & financial burden up until now, where the BTC value is less than half of what it was when you could/should have ended the matter.

As such i implore you to re-calculate the full refund value of 260 + 230 + 100 + 100 + 100 = 790 USD in todays BTC price.

This will be acceptable & i will agree that the matter is closed. I will also post my appreciation on each thread to remove the aforementioned tarnish.

I am regretful it has taken so long and so many posts to finally come close to a reconciliation, but i welcome the opportunity.

Sincerely,

Edgar

The controller board is bricked, no chance to connect by Ethernet anymore. BitmainWarranty is only servicing north America. Also BITMAIN gives only three month of warranty.

(Assuming you are having the issue of the miner dropping to 10% (ie. 50GH/s) hashing output after a bit.)

This issues description matches exactly the problem I experienced with the first December firmware I experienced after upgrading..

Why are they shipping new controllers when you could just reflash with the firmware that didnt have this issue..

I had the same problem.. I downgraded fixed the problem straight away..

https://www.bitmaintech.com/support.htm?pid=007201407180243004432lBQW28O0633


From Web Interface: System Tab, Backup / Flash Firmware Tab, Hit "Choose File" under Flash New Firmware Image section, Upload the latest BIN file from the link above.  

Problem solved!  (I assume it was a bad cgminer binary, nothing to get anyones panties in a bunch about.. the S3/S3+ is a very nice miner.)

PM BitmainWarranty and they'll sort you out, support is getting so much investment of time and systems at the moment.

Antminer S3 is basically okay. Support from BITMAIN in Europe however is not existent.

I have some bricked controller boards as well, emailed them, some emails back, no result. I would pay for the controller boards, not an issue.

Why do you think that people open threads with bounties to run the hashing boards on a RaspberryPI?

@Codemeister,

Please PM us, lets figure out why it took 20 days...   

Usually if you are located in USA, Report of RMA to parts exchange can be done as fast as the next day, average 2-4 business days on new products.  

Shipping time to return, 1-2 business days later, the replacement goes out.  (If the item received was defective)

Well, I had a broken controller board which has been swapped for a working one. It took about 20 days in total to send and receive. The miner is working perfectly again!

Thanks BitmainWarranty! 

Well that is certainly good news. I will add that to my thread. I hope this continues.

These peeps made good!  I am 100% happy, my issues rectified and I have been "made whole" in EVERY way.  SALUTE!   

Contact BitmainSupport to arrange the new controller board.

I do really like bitmain, they are one of the better asic manufacturers out there. That being said, their return/rma process and procedure is awful and it's nearly impossible to get support. I had a unit that showed up with a capacitor that was broken off, when I went back to them for a replacement, they told me to press hard on the chips. I even had pictures showing the damaged component on the board with big red arrows pointing at it.  I finally gave up after a month of emailing back and forth. So, I would forget about trying to get anything fixed or returned to them. Junk it and buy another and chalk it up to the cost of mining.

Bicknellski,

What I'm looking at when dealing with a support team (be that from Dell, SP-tech, IBM, SAP, HP, BITMAIN) is for a generic procedure which can be recorded and it's results evaluated. The saying "we're learning from our mistakes" is more to the point than ever. Unfortunately you can't have production in numbers and no failures. Especially when the units you build rely on the performance of numerous vendors you can't actually control.

That being said, a good support team is respectful with the customer buying their products, follows rigid rules in solving issues (scripted questionnaires, recording results, opinions and product failures case by case, escalation when necessary) so that they improve their response time, do not argue and or embarrass the customer and builds a body of knowledge in the process to support their products. It might seem funny, but the rules are implemented mostly due to the fact that someone is interested to measure and improve their performance and professionalism as well as to cut the overall support costs, as much as possible.

I won't go through my history in dealing with the support teams from F500 companies, however recently, I finalized an RMA process with SP-Tech. Let me tell you that those people are really interested in learning what went wrong with the units they sold and why that happened, they try to establish failure patterns and everything gets recorded in their systems. They're courteous and serviceable even outside the business hours, even late at night (due to the time difference Israel / North America). If you have their support contacts (Mike & Sonya) in your skype client .. you can see they're taking turns and are available most of the day time. When you talk with them you can feel that they're proud of being there and their success is SPT's success.

Missing emails at support@ is not an big issue, mostly because of the sheer number of messages going in and out. Eventually you get your turn. No one said it's next day support. But they try. When I have something important to deal with, I learnt to be persistent and/or contact them through every public channel available (skype, email, forum, enlarged team). In the end, someone answers and puts me on the right track. Even then, they seem happy they could help and do not let me drop until I'm satisfied with their answers. There's no difference between their support quality and Dell support, provided by Unisys .. in either case, I'm not feeling sorry for myself when I try to speak with them because of a miner/server issue.

You seem to be attacking me without many of the facts here and its rather weird. The BitmainWarranty IS Bitmain, and is in charge of the US returns centre. The only way to use that centre and not the CN centre is to contact them directly as advised. The customer has already stated he has an email string with Bitmain and so there is something that can very easily be transferred over.

You have also ignored that I diagnosed the problems with the miners prior to making the referral, as they are previously known issues. Both boards were physically fine but had a bugged firmware on, before one of them was bricked due to a failed flash. The bricked board needs RMA'ing to BitmainWarranty as advised and the other just needs 1024 firmware putting on as advised.

Anything else? Or can we get back to actually helping this person now....

@shoemakerbruce,

Something must went really wrong here and apology...

Would you please check your PM.  Sent you a contact info.  Lets resolve this.

Unfortunately you do not understand what a "scripted response" is. Let me explain.

1st level support is usually tasked to solve common issues, like "is it plugged in?", "let's upgrade firmware to the last stable version" .. etc .. The questions to be asked a customer seeking support are to be followed in a certain manner (i.e. scripted), so that based on the customer answers, if (s)he can't fix it, level one support escalates the issue to the right people. Therefore, Level 1 support follows a predetermined "script" to figure out the issue .. You don't need a lot of training for Level one support .. it just needs to be organized.

Now, it worries me a little, if the hired support behaves like in the post above, instructing a customer who paid a decent sum for a miner, to ship the miner or the boards / miners for replacement to another (official or not) forum user without proper customer identification, RMA #, incident analysis and documentation. BITAMAIN does not learn anything about the issue this way and considering everyone "legit" .. incurs costs without any possibility of fixing the same problems for other customers. That's basic support personnel training .. I hope for your sake that BITMAIN does not ask for customer reviews on the offered support when they close the tickets .. (if there are any support tickets) ..

You say I'm not helping.  I hope I do. If not the customer here, maybe other customers following .. If no one told you yet ..make sure you understand you're BITMAIN's employee. "your" beta is BITMAIN's beta. In the event you actually fixed some bugs, by saying literally that "1024 breaks the reset button" you are not doing BITMAIN any favors. I personally won't be considering thinking to buy any BITMAIN units with such support. It might be better than it was before .. but not good enough for the average North American in the 21st century.    

Agreed, anything but the beta firmware I posted past 1024 should be avoided. 1024 also breaks the reset button, my beta one fixes it.

If I am a scripted account, then my writer deserves a Turing Award.

Are you running the November S3 firmware version? I experienced a similar issue running the November firmware, but after switching to the 10-24 firmware my S3s have been rock solid.

The November firmware release contains a bug that causes S3s to slow down significantly after hashing for a few hours. It looks like Bitmain has removed the November S3 firmware from their website due to this issue.

It may have felt a lot like your emails to Bitmain since Dogie is a paid employee of bitmain to help english speaking customers. Supposedly. Most of his responses are simple scripted 1 liners. 

There is one already pop out.

Calm down guys. What dogie want to say is the second controller is unstable, maybe from firmware. You can try another firmware that available on bitmain site.

Note for updating firmware:
1. Do not use wifi connection, use direct connection pc to miner.
2. Do not close the web page until the process finish.
3. Do not poweroff the controller during process.
4. Do not unplug the utp cable during process

I read every word, and unlike your post I am contributing to sorting the problem....

ANYWAY, if you're in the US send them to BitmainWarranty and he will swap them out. The bricked controller does sound bricked, but your hashing issue is more than likely firmware based. What version are they running?

Good luck on finding support for your malfunctioning S3s!

Merry Christmas,
Adam

Thanks W00per, that is EXACTLY what I was thinking.  Funny, it felt a lot like my emails to BITMAIN.   Only difference was that theirs always starts with: I'm a bit confused.....

:-)

I ALMOST said:  did you read the post?

Thank you for picking up on that.

PEace, out.

B

I was hoping that, at least, you read the posts before you ask your scripted support questions.
The guy just said that "one card is totally dead and the other is unstable". Be happy he did not ask for spares.

You may.

I have 2 brand new units. I have no indications that the blades are defective in any way.  

The unit hashes for a few hours and then slows down. My ASIC indicators all show 0. (this is good) These new S3+'s are right next to S3's that have never given me a bit of trouble and I am asking for the S3 revision controller so i can have some stability.

Should I have asked for four new blades?   why?  Based on what?  because they slow down after a few hours?  My S3's NEVER slow down.  EVER.

I am not a testing and repair facility.  Should I start disassembling my S3's to use as testing components?

I use EVGA 1300 Gold and EVGA 850 Gold.  My existing S3's work like a champ and I love them.  

I am open to ideas but this is really getting old.

okay, so I should take my s3 controller and install on my s3+ to test?  I think they should send me old revision controllers for me to test with.. Why is it all on me?

thanks!

Bruce


Turns out I just needed the correct version of firmware.  23dec14

May I ask why you asked for two controllers when only one was bricked? What PSU are you running?

12DEC14, I contacted Bitmain to assist in troubleshooting as to why my 2 brand new S3+ miners slow down to ~50GH/S after running for only a few hours.    After too many emails I started raging here on this board.  People from Bitmain who cared stepped up and got my problems squared away in short order.  I have been "made whole" in every way and I have full confidence in Bitmain.  Growing pains are a tough thing.  We suffer our pains and we grow.  It's part of being new, and developing products in this new and ever changing environment.  [email protected] is likely the wrong place to send your issues.  I got my problems straight from bitmainwarranty  so go there up front if you have any operational issues with your new miners.  My new miner is now happily mining it's hash off and all is