I ran out of warranty time and had to return it, i'm sorry guys, thanks for at least trying to help. 
No problem dude, no need for sorry
Topic: Antminer S3 Problems, please help! (Read 1832 times)
No problem dude, no need for sorry
I ran out of warranty time and had to return it, i'm sorry guys, thanks for at least trying to help.
No, no matter what i do it won't work, Zich's instructions didn't do anything at all, i open a web browser, type 192.168.1.99 in the address bar, and it just says "Connecting..." in the lower left corner, then tells me it couldn't connect, then i try to ping 192.168.1.99 with cmd and EDIT: It actually says "your computer isn't connected to the internet" so it won't connect, even though the thing is direct connected to my computer........
Type ipconfig/all on cmd then please post the result screen shot
No, no matter what i do it won't work, Zich's instructions didn't do anything at all, i open a web browser, type 192.168.1.99 in the address bar, and it just says "Connecting..." in the lower left corner, then tells me it couldn't connect, then i try to ping 192.168.1.99 with cmd and EDIT: It actually says "your computer isn't connected to the internet" so it won't connect, even though the thing is direct connected to my computer........
So i got my Antminer S3 a few days ago, and i've been trying to get it to work ever since. I have a default gateway of 192.168.0.1 and CANNOT change it, and Dogie's Alternate Subnet Setup didn't work at all, it just didn't recognize my computer either. The S3 needs a gateway of 192.168.1.xx to work i believe, and i don't know what to do, please help me any suggestions or anything would be appreciated.
Note: Please forgive my grammar, it's very late here.
Note: Please forgive my grammar, it's very late here.
First you need to change you pc ip address to 192.168.1.10, subnet is 255.255.255.0
Then connect ethernet cable directly from your pc to s3.
Open web browser then access 192.168.1.99.
Then go to networking setting tab to change s3 ip example to
ip : 192.168.0.99,
subnet : 255.255.255.0
gateway : 192.168.0.1
dns : to your isp dns or use google dns 8.8.8.8
All i have is a patch cable, would that work?
It's should be work.
If not i could just buy a Crossover cable
All i have is a patch cable, would that work?
So i got my Antminer S3 a few days ago, and i've been trying to get it to work ever since. I have a default gateway of 192.168.0.1 and CANNOT change it, and Dogie's Alternate Subnet Setup didn't work at all, it just didn't recognize my computer either. The S3 needs a gateway of 192.168.1.xx to work i believe, and i don't know what to do, please help me any suggestions or anything would be appreciated.
Note: Please forgive my grammar, it's very late here.
Note: Please forgive my grammar, it's very late here.
First you need to change you pc ip address to 192.168.1.10, subnet is 255.255.255.0
Then connect ethernet cable directly from your pc to s3.
Open web browser then access 192.168.1.99.
Then go to networking setting tab to change s3 ip example to
ip : 192.168.0.99,
subnet : 255.255.255.0
gateway : 192.168.0.1
dns : to your isp dns or use google dns 8.8.8.8
Do you have access to a crossover cable? If so, plug the unit directly into your computer with it assigned to a working IP address in the 192.168.0.x range and you can then program the S3 at this point...
So i got my Antminer S3 a few days ago, and i've been trying to get it to work ever since. I have a default gateway of 192.168.0.1 and CANNOT change it, and Dogie's Alternate Subnet Setup didn't work at all, it just didn't recognize my computer either. The S3 needs a gateway of 192.168.1.xx to work i believe, and i don't know what to do, please help me any suggestions or anything would be appreciated.
Note: Please forgive my grammar, it's very late here.
Note: Please forgive my grammar, it's very late here.
Jump to: