ANTMINER S3 reboots unexpectedly | Bitcointalksearch.org

DrG

legendary

Activity: 2086

Merit: 1035

Quote from: 52edcs10ma on September 02, 2014, 08:38:34 AM

DEUS M1-550 was also not working with 2x ANTMINER S1 UV . It was the same problem as for ANTMINER S3 previously. After a few hours the GH/s dropped rapidly for both antminer s1.
LC POWER 600W (LC600H-12) works stable with ANTMINER S3 for 40 hours.

Quote from: philipma1957 on September 01, 2014, 08:41:30 AM

the deus m1-550
http://www.silentiumpc.com/en/deus-m1-550w-80plus-bronze/?lang=en
is this your psu?
and is this your other psu?
http://www.lc-power.de/index.php?id=488&L=1
They are not very good ones. Where do you live Eur or USA or ?? The deus is better quality then the lc is which is why you get better power numbers with it.

Yes, I own them both. I am in Europe.
What do you think about CS650M 650W 80+GOLD to power antminer s3? Would that be ok?

It's probably overkill for just 1 S3. Should you decide to get 2 S3s I would bump up the 650 to a Corsair 850 Gold or an EVGA 1000 Gold. Otherwise even a 500W Bronze Corsair is fine.

lowbander80

legendary

Activity: 1036

Merit: 1000

cx600 is good also anc cheeper I think I am using the since march with my S1 and when sold plugged the cx600 to the S3
running since batch 1 arrived in EU

52edcs10ma

jr. member

Activity: 42

Merit: 2

DEUS M1-550 was also not working with 2x ANTMINER S1 UV . It was the same problem as for ANTMINER S3 previously. After a few hours the GH/s dropped rapidly for both antminer s1.
LC POWER 600W (LC600H-12) works stable with ANTMINER S3 for 40 hours.

Quote from: philipma1957 on September 01, 2014, 08:41:30 AM

the deus m1-550
http://www.silentiumpc.com/en/deus-m1-550w-80plus-bronze/?lang=en
is this your psu?
and is this your other psu?
http://www.lc-power.de/index.php?id=488&L=1
They are not very good ones. Where do you live Eur or USA or ?? The deus is better quality then the lc is which is why you get better power numbers with it.

Yes, I own them both. I am in Europe.
What do you think about CS650M 650W 80+GOLD to power antminer s3? Would that be ok?

CoinBucks.IO

full member

Activity: 197

Merit: 100

CoinBucks.IO

Quote from: 52edcs10ma on September 01, 2014, 03:40:09 AM

After 12 hours the ANTMINER S3 powered by LC POWER 600W (LC600H-12) has no problems at all. Just the power consumption seems to be very high: 390W.

I will try Deus M1-550 with two ANTMINER S1 UV later today to check if the power supply is broken.

I agree with everyone else, I think this is a PSU issue and not a problem with the Miner itself. If you're ever back in the market for PSU Corsairs are insanely good, I've had them in my PCs for the last 10 years and never a single failure or inability to power large graphics cards.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: 52edcs10ma on September 01, 2014, 03:40:09 AM

After 12 hours the ANTMINER S3 powered by LC POWER 600W (LC600H-12) has no problems at all. Just the power consumption seems to be very high: 390W.

I will try Deus M1-550 with two ANTMINER S1 UV later today to check if the power supply is broken.

the deus m1-550

http://www.silentiumpc.com/en/deus-m1-550w-80plus-bronze/?lang=en

is this your psu?

and is this your other psu?

http://www.lc-power.de/index.php?id=488&L=1

They are not very good ones. Where do you live Eur or USA or ?? The deus is better quality then the lc is which is why you get better power numbers with it.

52edcs10ma

jr. member

Activity: 42

Merit: 2

After 12 hours the ANTMINER S3 powered by LC POWER 600W (LC600H-12) has no problems at all. Just the power consumption seems to be very high: 390W.

I will try Deus M1-550 with two ANTMINER S1 UV later today to check if the power supply is broken.

52edcs10ma

jr. member

Activity: 42

Merit: 2

I had Deus M1-550 PSU attached to antminer s3. I have changed the PSU an hour ago to LC POWER 600W (LC600H-12). It seem so be ok for now. I am going to report tomorrow after 24 hours. It takes 390W of the wall Sad

now.

thehairymob

full member

Activity: 152

Merit: 102

Have you tried the unit with another PSU?

52edcs10ma

jr. member

Activity: 42

Merit: 2

Hello

I had many bitcoins minners before and had no problems with them at all . Since I have ANTMINER S3 than I found there is very often something wrong with it.
My ANTMINER S3 reboots automatically after random time. Sometimes it works fine for 10 hours, sometimes its reboots after 10 minutes of proper job.

The strange thing is that after the automatic unwanted reboot the miner status shows only one chain. GH/S(5s) only drop a bit to c.a. 410 - 430 .

Here is the screenshot of miner status after the unwanted reboot:

If I reboot it manually then everything back to normal for 10 minuted - 10 hours.

Thanks

EDIT:
I have also checked the power consumption. Normally it is 354 - 356W, after the unexpected reboot it drops to 320 - 340W
The temperature of both chains is always below 40. The miner is not overclocked. Just using standard settings. Firmware is flashed to the newest version.

EDIT2:
After the last unexpected reboot the staus of chain 1 shows "oooooooo -------- " and there is no status for the other chain Sad

Topic: ANTMINER S3 reboots unexpectedly (Read 3037 times)