Topic: antminer s3 shutdown and asic status (Read 3163 times)
Thank you very much for grateful reply...
See the power switch on the PSU? Yep, that's the one. Flip it. Device now shut down.
lol... i know that but i just wanted to confirm that its ok with direct switch off the power.
But thanks any way..
Any information about why we getting "-" on Asic status ?
flipping the power switch is fine.
usually if asics are showing as '-' or 'o' it means you should reboot. try a software reboot first, and if that doesnt work, a PSU reboot. It can also be caused if you push a cheap PSU near its limits and it provides sub-par 12V power (such as 11.8V at high load). You should use a 550W+ PSU to be sure, and check that it has 450W+ on the 12V rail
See the power switch on the PSU? Yep, that's the one. Flip it. Device now shut down.
lol... i know that but i just wanted to confirm that its ok with direct switch off the power.
But thanks any way..
Any information about why we getting "-" on Asic status ?
See the power switch on the PSU? Yep, that's the one. Flip it. Device now shut down.
Hi all friends,
i buy new antminer s3+ but i didn't found how to shutdown miner proper way there is no any shutdown button on device as well as on control panel.
also i found my one miner show me "-" on Asic Status instead of "0". but second miner working fine.
i am using CX500 corsair
so how can i solve this problem as well as how can i shutdown device proper way.
bcoz i also tried "shutdown -h now" in ssh but its didn't working.
Thanks in advance for your help and support.
i buy new antminer s3+ but i didn't found how to shutdown miner proper way there is no any shutdown button on device as well as on control panel.
also i found my one miner show me "-" on Asic Status instead of "0". but second miner working fine.
i am using CX500 corsair
so how can i solve this problem as well as how can i shutdown device proper way.
bcoz i also tried "shutdown -h now" in ssh but its didn't working.
Thanks in advance for your help and support.
Jump to: