Glad to help.
Been so long since I ran my s4's I forgot about them having the matrix display on them. It was damn handy having a readout for IP address and hash rate. I truly wish today's miners would let you connect one for that!
BTW: Bitmain uses root root for all of their miners.
Topic: Antminer S4 IP 127.0.0.1 (Read 869 times)
Yes!!! OMG Thankyou so so so much!!!! 
:)Have a wonderful day!!! Thanks everyone!!
:)Have a wonderful day!!! Thanks everyone!!
ID and password should be
root
root
root
root
Now when I try to reset (press and hold the rest bottom nothing happens. It show 192.168.0.14 as IP Address and when I put on to navigate it tell that I need an ID and Password that I don't know>>>> then Miner start mining it self again.This is driving me crazy.
And no doubt the miner is reset to it's default IP addressing. Don't remember if the s4 defaulted to a static IP or was DHCP. I think it is DHCP so you will have to look at your router to find the miners new IP address.
Thank you so much .......I did it before and nothing was happening. I did now and that works, I don't know how but happens.
.... now the problem it seems mining for someone else, someone has hacked and changed all my settings, so I can't access.......
What can I do??
When you pressed the reset button on your miner, it set all the info back to the default info that it shipped with. Go to the Miner Configuration tab, enter your pool and worker info then click Save&Apply .... now the problem it seems mining for someone else, someone has hacked and changed all my settings, so I can't access.......
What can I do??
Thank you so much .......I did it before and nothing was happening. I did now and that works, I don't know how but happens.
.... now the problem it seems mining for someone else, someone has hacked and changed all my settings, so I can't access.......
What can I do??
.... now the problem it seems mining for someone else, someone has hacked and changed all my settings, so I can't access.......
What can I do??
hi there,
My S4 show IP as 127.0.0.1.
I have configure the DHCP .
I have changed the SD Card.
I have hold the reset bottom, but nothing change... I don't know what to do else.
can anyone help please?
It's been a long time since I messed with an s4. I'm pretty sure if you press & hold the reset button, it wipes out any changes you made and sets it back to the default. If you change the miner ip in the miner interface network page and click save and apply. It should save your change to dhcp.My S4 show IP as 127.0.0.1.
I have configure the DHCP .
I have changed the SD Card.
I have hold the reset bottom, but nothing change... I don't know what to do else.
can anyone help please?
Configuration:
•Power on the power supply using its push button at the back.
•Make sure that your router's subnet is 1, ie 192.168.1.x. If not then change it to 1, this is just temporary. ***If this is not possible, see below***
•Using a browser, navigate to 192.168.1.99 - this goes to the S4's configuration page.
•Login using "root" as both the username and password.
•Navigate to Network -> Settings.
•Change protocol to DHCP and click "Save & Apply".
•Using a browser, navigate to your router and find the IP it has assigned the S4 and navigate to that IP. This IP will also be displayed on the LCD.
•Navigate to the page Miner Configuration -> General Settings. Enter your pool information in the below format.
•Select "Beeper ringing" to "false" and click "Save & Apply".
•Navigate to the page "Miner Status" to check mining has started.
•You can then change your router subnet back to whatever you are used to using.
....
- Set the protocol to DHCP via Navigate to Network -> Interfaces -> WAN -> Edit. If you
don't want to use DHCP, navigate to Network -> Settings and make sure "Gateway" is set to the
IP of your router.
Or if you want, read Dogie's whole S4 setup guide here https://bitcointalksearch.org/topic/guide-dogies-comprehensive-bitmain-antminer-s4-setup-hd-813417 •Power on the power supply using its push button at the back.
•Make sure that your router's subnet is 1, ie 192.168.1.x. If not then change it to 1, this is just temporary. ***If this is not possible, see below***
•Using a browser, navigate to 192.168.1.99 - this goes to the S4's configuration page.
•Login using "root" as both the username and password.
•Navigate to Network -> Settings.
•Change protocol to DHCP and click "Save & Apply".
•Using a browser, navigate to your router and find the IP it has assigned the S4 and navigate to that IP. This IP will also be displayed on the LCD.
•Navigate to the page Miner Configuration -> General Settings. Enter your pool information in the below format.
•Select "Beeper ringing" to "false" and click "Save & Apply".
•Navigate to the page "Miner Status" to check mining has started.
•You can then change your router subnet back to whatever you are used to using.
....
- Set the protocol to DHCP via Navigate to Network -> Interfaces -> WAN -> Edit. If you
don't want to use DHCP, navigate to Network -> Settings and make sure "Gateway" is set to the
IP of your router.
hi there,
My S4 show IP as 127.0.0.1.
I have configure the DHCP .
I have changed the SD Card.
I have hold the reset bottom, but nothing change... I don't know what to do else.
can anyone help please?
My S4 show IP as 127.0.0.1.
I have configure the DHCP .
I have changed the SD Card.
I have hold the reset bottom, but nothing change... I don't know what to do else.
can anyone help please?
Jump to: