Author

Topic: Antminer S5 Mosfet 5pin U3...U50 Need Part Number (Read 1316 times)

hero member
Activity: 588
Merit: 500
Yes R18 looks good. I had been looking for IR18... Have corrected my list. I guess that covers it for the IC's  Smiley


Rich
hero member
Activity: 840
Merit: 1000
Here,s my best shot at a complete list of IC's on the Hash Board in the S5.

U1 - LM75A - Digital temperature sensor.
U3,U52,U53,U54,U55,U56,U57,U58,U59,U60,U61,U62,U63,U64 - C07F - SN74LVC1G07 - Buffer/Driver Open-Drain Output.
U6,U9,U12,U15,U18,U21,U24,U27,U30,U33,U36,U39 - 4VK4 - LN1134 - 1.85V LDO regulator.
U42,U45,U48 - IR18 - Part No.?  - LDO regulator.
U4,U5,U7,U8,U10,U11,U13,U14,U16,U17,U19,U20,U22,U24,U25,U26,U18,U29,U31,U31,U34,U35,U37,U38,U40,U41,U43,U44,U46,U47 - BM1384 - Hash ASIC.
U101 - 0J - RT8537 - Current mode Boost-type LED driver.


Notes :-

The SN74LVC1G07 Buffer chips are not fitted to the V1.1
The LDO's, except for the last stage are not fitted to V1.91
The IR18 LDO regulators fitted to the last 3 stages are different than those fitted to the first 12, have not identified the PN? They are fed with the 14V from U101 as opposed to being fed from the Core Voltage 3 levels up for the preceding 12.

Rich

U42-45-48 are "R18", I think.
That'd be Exar reference SPX5205M5-L-1-8

https://www.exar.com/common/content/document.ashx?id=618
hero member
Activity: 588
Merit: 500
Here,s my best shot at a complete list of IC's on the Hash Board in the S5.

U1 - LM75A - Digital temperature sensor.
U3,U52,U53,U54,U55,U56,U57,U58,U59,U60,U61,U62,U63,U64 - C07F - SN74LVC1G07 - Buffer/Driver Open-Drain Output.
U6,U9,U12,U15,U18,U21,U24,U27,U30,U33,U36,U39 - 4VK4 - LN1134 - 1.85V LDO regulator.
U42,U45,U48 - R18 - SPX5205M5-L-1-8  - 1.8V LDO regulator.
U4,U5,U7,U8,U10,U11,U13,U14,U16,U17,U19,U20,U22,U24,U25,U26,U18,U29,U31,U31,U34,U35,U37,U38,U40,U41,U43,U44,U46,U47 - BM1384 - Hash ASIC.
U101 - 0J - RT8537 - Current mode Boost-type LED driver.


Notes :-

The SN74LVC1G07 Buffer chips are not fitted to the V1.1
The LDO's, except for the last stage are not fitted to V1.91
The R18 LDO regulators fitted to the last 3 stages are different than those fitted to the first 12, They are fed with the 14V from U101 as opposed to being fed from the Core Voltage 3 levels up for the preceding 12.

Rich

Information corrected with info from post below.
hero member
Activity: 588
Merit: 500
Also step up U101 was founded by other user ( looks 100% exact part), take a look and let me know, here the link
http://www.richtek.com/assets/product_file/RT8537/DS8537-00.pdf

China Supplier :  http://world.taobao.com/item/41623701251.htm?spm=a312a.7700714.0.0.SuihJf#detail

Boris


Yes that looks like the exact device with the correct code.

Rich
newbie
Activity: 22
Merit: 0
The main part you are likely to need when repairing is the Hash ASIC BM1384, (U4 - U47). These would only be available from Bitmain, however I suspect they are not selling them, so you will need to remove devices from a failed board to repair others.

Rich


Rich I think that P/N is : SN74LVC1G07 Single Buffer/Driver With Open-Drain Output
http://www.ti.com/product/sn74lvc1g07



Yes sorry my mistake, U6, U9, U12 ..... U39, U42, U45 are as you say SN74LVC1G07 The rest of the chips in the Range U4 - U47 are the BM1384

Rich


You are 100% about chips numbers ...
And thanks for confirm the SN74LVC1G07

Also step up U101 was founded by other user ( looks 100% exact part), take a look and let me know, here the link
http://www.richtek.com/assets/product_file/RT8537/DS8537-00.pdf

China Supplier :  http://world.taobao.com/item/41623701251.htm?spm=a312a.7700714.0.0.SuihJf#detail

Boris



Boris
hero member
Activity: 588
Merit: 500
The main part you are likely to need when repairing is the Hash ASIC BM1384, (U4 - U47). These would only be available from Bitmain, however I suspect they are not selling them, so you will need to remove devices from a failed board to repair others.

Rich


Rich I think that P/N is : SN74LVC1G07 Single Buffer/Driver With Open-Drain Output
http://www.ti.com/product/sn74lvc1g07



Yes sorry my mistake, U6, U9, U12 ..... U39, U42, U45 are as you say SN74LVC1G07 The rest of the chips in the Range U4 - U47 are the BM1384

Rich
newbie
Activity: 22
Merit: 0
The main part you are likely to need when repairing is the Hash ASIC BM1384, (U4 - U47). These would only be available from Bitmain, however I suspect they are not selling them, so you will need to remove devices from a failed board to repair others.

Rich


Rich I think that P/N is : SN74LVC1G07 Single Buffer/Driver With Open-Drain Output
http://www.ti.com/product/sn74lvc1g07
hero member
Activity: 588
Merit: 500
The main part you are likely to need when repairing is the Hash ASIC BM1384, (U4 - U47). These would only be available from Bitmain, however I suspect they are not selling them, so you will need to remove devices from a failed board to repair others.

Rich
newbie
Activity: 22
Merit: 0
Are you really asking for the part numbers for most, but not all, of the Integrated Circuits on an S5 hash board? If you have a board you can read them off? Give us a bit of background, why you want this information?

Rich


Rich
These part Number has a B2B number but do not belong to any commercial or technical part, that's why asking for help.
Basically need it for repair my bad boards

Thanks
Boris
hero member
Activity: 588
Merit: 500
Are you really asking for the part numbers for most, but not all, of the Integrated Circuits on an S5 hash board? If you have a board you can read them off? Give us a bit of background, why you want this information?

Rich
newbie
Activity: 22
Merit: 0
   Need help on finding Mosfet Part Number on S5 hashboard ( U1...U50), I think that all are unique in this board
   
    Thanks
Jump to: