Antminer S5 No hashing, no red lights on the hash board

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: Deus667 on December 31, 2015, 04:47:49 AM

I bought the unit used... so it might have been overclocked, I wouldn't know.

do you think it would be the hash boards or the control board?

the strange thing was that it worked for 12h...
it was not running at a straight speed though.

Do you think I could get replacement parts from bitmain tech?

If you bought it and it only worked 12 hours... contact seller. Ask if they had problems. Also what PSU are you using with it? Is it plugged in all 4 plugs?

Also on images up a few posts you need to add them it shows some edit screen, no image links.

Av8Surf

newbie

Activity: 13

Merit: 0

I have same issue. No lights. No fan spin.

Did you fix it?

Deus667

newbie

Activity: 19

Merit: 0

I bought the unit used... so it might have been overclocked, I wouldn't know.

do you think it would be the hash boards or the control board?

the strange thing was that it worked for 12h...
it was not running at a straight speed though.

Do you think I could get replacement parts from bitmain tech?

Sweminer777

hero member

Activity: 754

Merit: 500

1xBit the largest casino

Sounds like that the boards have burned.

Have you overclocked it?, what psu do you use?, do your cables get warm?.

Deus667

newbie

Activity: 19

Merit: 0

I had a feeling that there was some power loss on the unit...
Could those little power discharges have broken it?

The funny thing is I keep getting different readings in tab: miner status

I tried the diagnostic that is recommended by the bitmain web-site.
Disconnecting 1 hash board to see which board is broken. But I don't know what to look for?

When 1 board is connected
http://imgur.com/edit

When both are connected
http://imgur.com/edit

When only 1 board is connected all 30 asic are visible. But no hashing. For both boards.
Now sometimes when I reboot it's the 1st chain that is missing asics, then again the 2nd...
I tried dialing the frequency down and all of a sudden all 2x 30 asic are visible again (but still no hashing) and then they are gone again.

Last I tried going back to the original firmware and got scared as it wouldn't do anything any more... but after a reboot I could still access the menu

Could it be the control board?
How could I know? I expected when the control board goes nothing would start anymore...

RichBC

hero member

Activity: 588

Merit: 500

Quote from: Deus667 on December 30, 2015, 11:54:21 AM

Now I noticed something weird on the power connexion for the controller board. Looks like 2 of the 4 connexions are touching... I don't supposed that's normal, right?

Should not be like that, but not actually a problem as that pair & the other pair are connected by the copper on the PCB for GND & 12V

Rich

Deus667

newbie

Activity: 19

Merit: 0

My antminer S5 was working for not even 12h when he stopped working...

In status I saw:
asic chain 1: 30
asic chain 2: 03

After a few tries of checking the cables and switching power supplies I experimented with new firmwares.
The 2015-04-15 got me my 2x 30 asic back... but still no red light on the board nor does it hash....

Now I noticed something weird on the power connexion for the controller board. Looks like 2 of the 4 connexions are touching... I don't supposed that's normal, right?

http://imgur.com/3VCkTNT

Topic: Antminer S5 No hashing, no red lights on the hash board (Read 2126 times)