Antminer S5 not recorded in DHCP table

coolsumesh

newbie

Activity: 2

Merit: 0

Quote from: Minerkev on March 02, 2015, 05:04:03 PM

Try to reset the antminer
https://www.bitmaintech.com/files/download/AntMiner-S5%20user%20guide.pdf
Las point 6.4

Hi Thanks. This helped and the miner is fine now

Zich

legendary

Activity: 1190

Merit: 1000

The miner maybe use static ip. You should ask the seller about the ip.

Minerkev

jr. member

Activity: 58

Merit: 10

Try to reset the antminer
https://www.bitmaintech.com/files/download/AntMiner-S5%20user%20guide.pdf
Las point 6.4

philipma1957

legendary

Activity: 4326

Merit: 8899

'The right to privacy matters'

Quote from: coolsumesh on March 02, 2015, 02:20:02 PM

Hi All

I recently bought an antminer S5 and i was able to power it up using Corsair 750 Watts PSU. I connected the lan cable to antminer from my router, but it is not displayed in my routers DHCP table. All other devices connected in my home are displayed in DHCP table. I checked if the lan cable is ok by using the same cable to my PC and it is getting listed in DHCP. But Antminer S5 alone is not getting listed. I also confirmed it is not detecting using angry IP scanner and confirmed that my subnet is 192.168.1.x

My router assigns IP address ranging from 192.168.1.100 and forward. (I couldnt make it start from 192.168.1.2) I am using a 300 Mbps TPLINK Wireless N ADSL2 + modem router.

Any tips on what i am doing wrong is appreciated.

did you order it second hand? it may not be configured to set an ip. or if it is configured to set an ip it may have set it under 1.100

coolsumesh

newbie

Activity: 2

Merit: 0

Hi All

I recently bought an antminer S5 and i was able to power it up using Corsair 750 Watts PSU. I connected the lan cable to antminer from my router, but it is not displayed in my routers DHCP table. All other devices connected in my home are displayed in DHCP table. I checked if the lan cable is ok by using the same cable to my PC and it is getting listed in DHCP. But Antminer S5 alone is not getting listed. I also confirmed it is not detecting using angry IP scanner and confirmed that my subnet is 192.168.1.x

My router assigns IP address ranging from 192.168.1.100 and forward. (I couldnt make it start from 192.168.1.2) I am using a 300 Mbps TPLINK Wireless N ADSL2 + modem router.

Any tips on what i am doing wrong is appreciated.

Topic: Antminer S5 not recorded in DHCP table (Read 2049 times)