Topic: antminer S5 Problem Asic (Read 2986 times)
I had that problem for a while I just made sure the firmware was up to date and after the firmware update it resolved the issue and now works great.
Try doing a factory reset.
Hello dish67
I have the same problem, after one mounth of use , but with chain 2.
You found the problem , Bitmaintech send you some answers ?
regards,
claudiu
I have the same problem, after one mounth of use , but with chain 2.
You found the problem , Bitmaintech send you some answers ?
regards,
claudiu
I think he been taken care of on account it says: Last Active: May 19, 2015, 02:22:35 PM
But if I'm work please let us know! Hopefully though OP is mining as we speak.
Hello dish67
I have the same problem, after one mounth of use , but with chain 2.
You found the problem , Bitmaintech send you some answers ?
regards,
claudiu
I have the same problem, after one mounth of use , but with chain 2.
You found the problem , Bitmaintech send you some answers ?
regards,
claudiu
Thank you for your answer
I try to change PSU and I have same result
I try to remove cable and re install cable same result
I check your URL and my board is good
I just opened case with Bitmaintech ... I wait about us
if your have another suggestion just write me again tk..
I try to change PSU and I have same result
I try to remove cable and re install cable same result
I check your URL and my board is good
I just opened case with Bitmaintech ... I wait about us
if your have another suggestion just write me again tk..
Start out here - https://bitmain.zendesk.com/hc/en-us/articles/204875015-How-to-diagnose-S5-hashing-PCB
Assuming that does not help then go here - https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S
And if that does not do anything then contact bitmain support.
Assuming that does not help then go here - https://bitmain.zendesk.com/hc/en-us/articles/203559969-My-S5-hashes-at-about-600GH-S
And if that does not do anything then contact bitmain support.
Hi
I have antminer S5 for about 2 month and my power is about 593.42 GH/S
Asic Status
my chains 1 is -------- -------- -------- ------
my chains 2 is oooooooo oooooooo oooooooo oooooo
do you know what happen with my antminer s5
Maybe bad contact. Check all of ribbon cable, unplug the ribbon cable then plug in again. I have antminer S5 for about 2 month and my power is about 593.42 GH/S
Asic Status
my chains 1 is -------- -------- -------- ------
my chains 2 is oooooooo oooooooo oooooooo oooooo
do you know what happen with my antminer s5
again it seems a faulty asic, by the way what software for mining are you using?
we need to know more info to help you
we need to know more info to help you
Hi
I have antminer S5 for about 2 month and my power is about 593.42 GH/S
Asic Status
my chains 1 is -------- -------- -------- ------
my chains 2 is oooooooo oooooooo oooooooo oooooo
do you know what happen with my antminer s5
https://i.imgur.com/YBWqfbj.jpg
I have antminer S5 for about 2 month and my power is about 593.42 GH/S
Asic Status
my chains 1 is -------- -------- -------- ------
my chains 2 is oooooooo oooooooo oooooooo oooooo
do you know what happen with my antminer s5
https://i.imgur.com/YBWqfbj.jpg
Jump to: