Shenzhen Bitbee Innovation Company is the biggest bitcoin miners distributor with research department which gave birth to the new brand Aladdin.
The main brands cover the major machines of antminers, baikal, Aladdin, whatsminer and Innosilicon Miner. In 2018, Bitbee launched the Aladdin bitcoin mine, generating instantaneous reactions from the market . Soon , Aladdin has catapulted into the forefront of the world's mining rigs brands.
Our main business is miners supply and manufacture for both domestic trade and international trade. Besides Bitbee, we have a supply chain company and a we-media company.
Our headquater and research center are based in Shenzhen. The address of our company is 2310, Saige Building Huaqiang North Road,Futian District, Shenzhen China and that of our exhibition center is at 4th floor of the same building.
Unlike consumer electronics, mining machines are tailored to customers' needs for investment products that require careful investment. Bitbee Innovation & Aladdin will continue to focus on the development and upgrading of cryptocurrency mining machines
Now we are seeking global partners and distributors customers to encourage the development of the crytocurrency mining rigs industry. Our company website www.ald.top and global source site will come out soon. Welcome contact us at [email protected] or give us messeges for cooperation and any kind of inquires. We’re ready.
[email protected]
2310, Saige Building Huaqing North Road,Futian District, Shenzhen China
4th floor,exhibtion center Saige Building Huaqing North Road
Topic: Antminer S5 wont connect, no lights on boards (Read 506 times)
Maybe you should move this to the mining section. This isn't really the right place to put this.
People there would gladly help you and also the experts will likely read your post if you moved it there. Good luck with your problem.
People there would gladly help you and also the experts will likely read your post if you moved it there. Good luck with your problem.
So bit of a weird story.
I got an Antminer S5, factory reset it, connected it to a gold 605W PSU and pool and was mining at 350 hz, 1150 GHz and everything was working for around 12 hours at 60 degrees. Before I shut it down I changed the hz to 150 to see if it quieted the fan and shut it down.
I bought a new fan, removed the stock fan and tried to connect the 120mm new fan. The 4 pic connector was slightly different on the back and it wouldn’t fit the plug. I put the stock fan back on and powered up the machine.
Since then the only lights on the miner are 3 green and 1 red on the control board. There are no lights on the blades and I can’t connect to the IP anymore. The 2 lights in the Ethernet cable are on but not the green or red lights on the right of the Ethernet.
I have tried everything to connect, it won’t factory reset and nothing I do changes the power up sequence. The fan turns on and there are just the 1 red light and 3 green lights in a row on the control board. The Ethernet cable is connected and it works on other computers. I can see everything connected to my router but the antminer has disappeared. It seems like it is not powering up at all.
Please help.
I got an Antminer S5, factory reset it, connected it to a gold 605W PSU and pool and was mining at 350 hz, 1150 GHz and everything was working for around 12 hours at 60 degrees. Before I shut it down I changed the hz to 150 to see if it quieted the fan and shut it down.
I bought a new fan, removed the stock fan and tried to connect the 120mm new fan. The 4 pic connector was slightly different on the back and it wouldn’t fit the plug. I put the stock fan back on and powered up the machine.
Since then the only lights on the miner are 3 green and 1 red on the control board. There are no lights on the blades and I can’t connect to the IP anymore. The 2 lights in the Ethernet cable are on but not the green or red lights on the right of the Ethernet.
I have tried everything to connect, it won’t factory reset and nothing I do changes the power up sequence. The fan turns on and there are just the 1 red light and 3 green lights in a row on the control board. The Ethernet cable is connected and it works on other computers. I can see everything connected to my router but the antminer has disappeared. It seems like it is not powering up at all.
Please help.
Jump to: