Hi everyone! Thanks for the replies.
The problem is Fixed! But I spend a lot of time looking the proper fan cooler!
I bought one in my country and the fan cooler was a scam, so I bought it in amazon with no problems so far! I made the test as recommended and the cooler and hashing was better than ever!
Thanks everyone!
Topic: Antminer S7 Batch 8 - Problem - [SOLVED] (Read 1940 times)
100% is the fan that cause this issue to happen. Change a new 1 will be fine.
Hello!
Sorry for my english.
I have 3 antminer s7 batch 8 for about 8 months, yesterday i have my first problem,
What it could it be, what are the specification of the fan cooler?
Thank you
Sorry for my english.
I have 3 antminer s7 batch 8 for about 8 months, yesterday i have my first problem,
- I first notice that one miner have the red light button on, I turn off for about 15min with the same reaction
- I unplugged all the cables and put it back few minutes later
- I notice the fan cooler of the back don't start properly and the front fan cooler is working more noisy than usual
What it could it be, what are the specification of the fan cooler?
Thank you
As mentioned above this could be a cooling problem. The second fan will be louder and more active in order to compensate for this.
I think it was the Antminer S7s that are technically made so that they only need one fan in function at any time, though It's a good idea tokeep monitoring the temperature of the miner ever 15 minutes by te GUI on a temporary bases to ensure there's no prolonged problems.
It may be a good idea to do what the second poster stated and try stwitching around the fans in order to see if it's the fan that's broken or if it's just the cables between them. I've also heard that other problems can lead to warning lights and beeping such as poor internet connection, so it may be good to check this stuff aswell and ensure that the frequency is at the correct amount for it to properly function.
this week i will replace the fan cooler!
The other miners aren't giving me problems at all!
Thank you! Keep you post it!
The other miners aren't giving me problems at all!
Thank you! Keep you post it!
Also you might try swapping fan's you do have before ordering to make sure it is fan. If it is back fan the problem should follow, and the good thing is to test this should not take long likely less then 10 minutes to test.
But if you do make sure to get proper fan for S7. You can order direct from Bitmain, or if in US BitmainWarranty also sells fan's. But I would order from a official source personally being those two.
this week i will replace the fan cooler!
The other miners aren't giving me problems at all!
Thank you! Keep you post it!
The other miners aren't giving me problems at all!
Thank you! Keep you post it!
Seems like your miners have trouble cooling.
If the back fan isn't working properly, the front one will try to compensate but it won't create a good flow and your miners won't work properly.
I'd look into replacing the fans.
Are all your miners doing the same thing?
If the back fan isn't working properly, the front one will try to compensate but it won't create a good flow and your miners won't work properly.
I'd look into replacing the fans.
Are all your miners doing the same thing?
Hello!
Sorry for my english.
I have 3 antminer s7 batch 8 for about 8 months, yesterday i have my first problem,
What it could it be, what are the specification of the fan cooler?
Thank you
Sorry for my english.
I have 3 antminer s7 batch 8 for about 8 months, yesterday i have my first problem,
- I first notice that one miner have the red light button on, I turn off for about 15min with the same reaction
- I unplugged all the cables and put it back few minutes later
- I notice the fan cooler of the back don't start properly and the front fan cooler is working more noisy than usual
What it could it be, what are the specification of the fan cooler?
Thank you
Jump to: