antminer s7 beeping / not connecting to the pool

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: jameel354 on March 06, 2016, 10:57:56 AM

Quote from: philipma1957 on March 06, 2016, 02:54:33 AM

Quote from: jameel354 on March 05, 2016, 04:11:22 PM

what will happen if i keep in on 800 freq?
and why did you cover my workers names?
also what do the errors mean? what is the boundary? what will happen if i go over that boundary?
also what pool do you mine on?

what will happen if i keep in on 800 freq?
it will error like a motherfucker and you will get a lower hashrate plus burn a lot more power.

and why did you cover my workers names?
to protect your privacy.

also what do the errors mean?
errors mean wasted shares = lost hashing

what is the boundary?
you could go as low as 0.0000 errors = no wasted shares
I try to keep my s-7 under 0.0100 errors I have seen s-7's do 2.3000% losing a ton of hashrate wasting a ton of power

what will happen if i go over that boundary?

When I go over that error rate of 0.0100% hashrate drops enough to notice power is wasted.
you machine is doing really good at 0.0050% hardly any wasted hash and it runs cool under 60 on all numbers

also what pool do you mine on?
my favorite pools are:

https://www.kano.is/
http://www.bravo-mining.com/index.php
http://mmpool.org/

based on your error rate at freq 800 0.1800% = poor error rate

and compared to your error rate at freq 700 0.0050% = great error rate

I would drop it to freq 750 and run for an hour or 2 then give a screen shot.

it has been 2 hours on 750 freq
http://prntscr.com/abxjoa
i think i might run it on 700 freq

how many miners do you have?
how do you keep them cool?
where do you put them? i.e self storage or a warehouse
i am thinking about move my stuff to a self storage place, should i? if not any other suggestions?
they will pay for my power so that is a win Cheesy

thanks for all you help

your error rate is really good at 700

This allows you to keep miner cooler with fans set on manual speed setting.

I would try freq 700 set fans at 55 %.

70% manual setting is top speed around 4500 rpm.

If you do 55 % fans will drop to 3500 rpm if temps read 62c or less you are okay.

I have 6 Avalon 6s and 1 s-7

I run a few in my garage and a few in a barn plus one in a friends office

jameel354

newbie

Activity: 20

Merit: 0

Quote from: philipma1957 on March 06, 2016, 02:54:33 AM

Quote from: jameel354 on March 05, 2016, 04:11:22 PM

what will happen if i keep in on 800 freq?
and why did you cover my workers names?
also what do the errors mean? what is the boundary? what will happen if i go over that boundary?
also what pool do you mine on?

what will happen if i keep in on 800 freq?
it will error like a motherfucker and you will get a lower hashrate plus burn a lot more power.

and why did you cover my workers names?
to protect your privacy.

also what do the errors mean?
errors mean wasted shares = lost hashing

what is the boundary?
you could go as low as 0.0000 errors = no wasted shares
I try to keep my s-7 under 0.0100 errors I have seen s-7's do 2.3000% losing a ton of hashrate wasting a ton of power

what will happen if i go over that boundary?

When I go over that error rate of 0.0100% hashrate drops enough to notice power is wasted.
you machine is doing really good at 0.0050% hardly any wasted hash and it runs cool under 60 on all numbers

also what pool do you mine on?
my favorite pools are:

https://www.kano.is/
http://www.bravo-mining.com/index.php
http://mmpool.org/

based on your error rate at freq 800 0.1800% = poor error rate

and compared to your error rate at freq 700 0.0050% = great error rate

I would drop it to freq 750 and run for an hour or 2 then give a screen shot.

it has been 2 hours on 750 freq
http://prntscr.com/abxjoa
i think i might run it on 700 freq

how many miners do you have?
how do you keep them cool?
where do you put them? i.e self storage or a warehouse
i am thinking about move my stuff to a self storage place, should i? if not any other suggestions?
they will pay for my power so that is a win Cheesy

thanks for all you help

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: jameel354 on March 05, 2016, 04:11:22 PM

what will happen if i keep in on 800 freq?
and why did you cover my workers names?
also what do the errors mean? what is the boundary? what will happen if i go over that boundary?
also what pool do you mine on?

what will happen if i keep in on 800 freq?
it will error like a motherfucker and you will get a lower hashrate plus burn a lot more power.

and why did you cover my workers names?
to protect your privacy.

also what do the errors mean?
errors mean wasted shares = lost hashing

what is the boundary?
you could go as low as 0.0000 errors = no wasted shares
I try to keep my s-7 under 0.0100 errors I have seen s-7's do 2.3000% losing a ton of hashrate wasting a ton of power

what will happen if i go over that boundary?

When I go over that error rate of 0.0100% hashrate drops enough to notice power is wasted.
you machine is doing really good at 0.0050% hardly any wasted hash and it runs cool under 60 on all numbers

also what pool do you mine on?
my favorite pools are:

https://www.kano.is/
http://www.bravo-mining.com/index.php
http://mmpool.org/

based on your error rate at freq 800 0.1800% = poor error rate

and compared to your error rate at freq 700 0.0050% = great error rate

I would drop it to freq 750 and run for an hour or 2 then give a screen shot.

jameel354

newbie

Activity: 20

Merit: 0

Quote from: cameltoe on March 05, 2016, 04:54:51 PM

Quote from: jameel354 on March 05, 2016, 04:11:22 PM

what will happen if i keep in on 800 freq?
and why did you cover my workers names?
also what do the errors mean? what is the boundary? what will happen if i go over that boundary?
also what pool do you mine on?

How long have you been running these settings?

at the minute i am running like
http://prntscr.com/abo7ss

cameltoe

member

Activity: 98

Merit: 10

Quote from: jameel354 on March 05, 2016, 04:11:22 PM

what will happen if i keep in on 800 freq?
and why did you cover my workers names?
also what do the errors mean? what is the boundary? what will happen if i go over that boundary?
also what pool do you mine on?

How long have you been running these settings?

jameel354

newbie

Activity: 20

Merit: 0

what will happen if i keep in on 800 freq?
and why did you cover my workers names?
also what do the errors mean? what is the boundary? what will happen if i go over that boundary?
also what pool do you mine on?

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: jameel354 on March 03, 2016, 11:39:54 AM

it has been a hour
http://prntscr.com/aaqdvm

I am sorry I missed this. your error rates are in red and you are doing great
leave it alone!!!

jameel354

newbie

Activity: 20

Merit: 0

it has been a hour
http://prntscr.com/aaqdvm

jameel354

newbie

Activity: 20

Merit: 0

how do i see the error rates?
okay i have changed it to 700
http://prntscr.com/aape42

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: jameel354 on March 03, 2016, 06:50:31 AM

okay thanks

look at the error rates you are at about 0.600 with freq 725

your error rates should be much lower.

set at freq 700 wait an hour and send a screenshot I will compare the error rate.

I would like to see 0.0600 not 0.6000

jameel354

newbie

Activity: 20

Merit: 0

okay thanks

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: jameel354 on March 02, 2016, 12:34:56 PM

how do i turn of the overclock?
it is fine know Cheesy

http://prntscr.com/aac2x0

the freq needs to be set to 700 not 725

jameel354

newbie

Activity: 20

Merit: 0

how do i turn of the overclock?
it is fine know Cheesy

http://prntscr.com/aac2x0

algin8189

newbie

Activity: 42

Merit: 0

Suggestion 1. Dont overclock your s7, i looked into your screenshot.... u are overclocking the chips.......
Suggestion 2. Set your fan speed at 60-70% if u wanna overclock, your fan spinning at 1900rpm? Pretty sure you are setting the fan speed around 10-20% due to the noise.....( i dont have a s7, im just guessing the fan rpm)
Suggestion 3. Turn it off, so it wont overheating again.

jameel354

newbie

Activity: 20

Merit: 0

i have put it in the outhouse and it is still getting relay hot
http://prntscr.com/aa87ao
i dont know how to cool it? an good suggestions?

VirosaGITS

legendary

Activity: 1302

Merit: 1068

Quote from: jameel354 on March 01, 2016, 02:39:06 PM

i have set it to 80% and it is still beeping. i think it is beeping because of the temp in that room, i am running it in the houses next to the front door, but it is on a wooden table.
i am planning to move it to a outhouse so it will be well ventilated.
can i ask what does the stuff in the red box mean?
http://prntscr.com/a9ys0x

I dont know, it would need to be really hot for the miner to start at over 80C. A human would die in such heat.

And what do you mean, the stuff in the red box? You circled just about every single thing.

And i still dont see Kano.is on your list.

Theres nothing wrong with the ASIC count and o status mean Okay.

jameel354

newbie

Activity: 20

Merit: 0

i have set it to 80% and it is still beeping. i think it is beeping because of the temp in that room, i am running it in the houses next to the front door, but it is on a wooden table.
i am planning to move it to a outhouse so it will be well ventilated.
can i ask what does the stuff in the red box mean?
http://prntscr.com/a9ys0x

VirosaGITS

legendary

Activity: 1302

Merit: 1068

Quote from: jameel354 on March 01, 2016, 03:01:53 AM

here is my main screen = http://prntscr.com/a9qcq8
networking tab = http://prntscr.com/a9qe45
mining config tab = http://prntscr.com/a9qdfz
mining ad config = http://prntscr.com/a9qdk9
mining status = http://prntscr.com/a9qdt7
Diagnostics page = http://prntscr.com/a9qe8t

the static ip works because i pinged a website. i could be it overheating?? but i dont know

Your temps are above the safety failsafe, but you have no mining done at all. Normally you'll mine a bit before it goes to failsafe mode. Try spinning your fan to full speed and try the Kano pool i recommended.

Edit: I see you set your fan to 100%, you typically don't do that, set it to 80%.

jameel354

newbie

Activity: 20

Merit: 0

here is my main screen = http://prntscr.com/a9qcq8
networking tab = http://prntscr.com/a9qe45
mining config tab = http://prntscr.com/a9qdfz
mining ad config = http://prntscr.com/a9qdk9
mining status = http://prntscr.com/a9qdt7
Diagnostics page = http://prntscr.com/a9qe8t

the static ip works because i pinged a website. it could be it overheating?? but i dont know

ericjohy

newbie

Activity: 6

Merit: 0

Quote from: VirosaGITS on February 29, 2016, 07:08:51 PM

Quote from: jameel354 on February 29, 2016, 07:03:46 PM

could it be how i set up the static ip?

I dont think you should use static ip, you should use static DHCP lease. Anyways, the screenshot you uploaded doesnt work. It show a broken image link. Maybe re-up so i can get a better idea. Also i'd say try to mine at Kano pool;
https://www.kano.is/

Its easy to setup and will let us know if its just you not using the right pool url/pw.

You may also simply want to mine there, as well.

thank you for your idea me also confuse now clear my way now am using static DHCP...

VirosaGITS

legendary

Activity: 1302

Merit: 1068

Quote from: jameel354 on February 29, 2016, 07:03:46 PM

could it be how i set up the static ip?

I dont think you should use static ip, you should use static DHCP lease. Anyways, the screenshot you uploaded doesnt work. It show a broken image link. Maybe re-up so i can get a better idea. Also i'd say try to mine at Kano pool;
https://www.kano.is/

Its easy to setup and will let us know if its just you not using the right pool url/pw.

You may also simply want to mine there, as well.

jameel354

newbie

Activity: 20

Merit: 0

could it be how i set up the static ip?

unholycactus

legendary

Activity: 1078

Merit: 1024

The beeping noise signifies that the miner cannot connect to the internet.
If you can access the HTML configuration base, it must mean that the info to connect the f2pool isn't correct.

jameel354

newbie

Activity: 20

Merit: 0

i have just got my new s7 and it will not start mining and it keeps beeping and i dont know how to stop the beeping noise Sad

i have connect it to f2pool and set up a work. on the monitor screen it says it is alive but it is still beeping i dont know how to fix it.
here is my main screen = http://prntscr.com/a9qcq8
networking tab = http://prntscr.com/a9qe45
mining config tab = http://prntscr.com/a9qdfz
mining ad config = http://prntscr.com/a9qdk9
mining status = http://prntscr.com/a9qdt7
Diagnostics page = http://prntscr.com/a9qe8t

also i dont think the miner is connecting to the pool.

Topic: antminer s7 beeping / not connecting to the pool (Read 3039 times)