Author

Topic: Antminer s7 hashboard not working (Read 584 times)

newbie
Activity: 31
Merit: 0
August 20, 2017, 10:55:14 PM
#7
Antbleeding (c) Wink
This was recently fixed and there's no real proof of it ever being used if I am correct. Antbleed was a sort of loophole that could allow Bitmain to essentially take over miners which was quickly patched, you could try a firmware update but make sure you do everything correctly or you could brick your miner.

so do you think it could be a software problem? When I switched the position of the boards the boards the same one stayed unfunctional. I took the board out, but I have no idea how to troubleshoot. I will try the firmware update though.
legendary
Activity: 1624
Merit: 1130
Bitcoin FTW!
August 20, 2017, 09:18:28 PM
#6
Antbleeding (c) Wink
This was recently fixed and there's no real proof of it ever being used if I am correct. Antbleed was a sort of loophole that could allow Bitmain to essentially take over miners which was quickly patched, you could try a firmware update but make sure you do everything correctly or you could brick your miner.
newbie
Activity: 31
Merit: 0
August 20, 2017, 01:38:32 PM
#5
Antbleeding (c) Wink

what is that? I think that my problem is a hardware problem.
member
Activity: 61
Merit: 10
August 20, 2017, 01:30:45 PM
#4
Antbleeding (c) Wink
newbie
Activity: 31
Merit: 0
August 20, 2017, 01:29:07 PM
#3
yeah it was still the same one, so im pretty sure it has to be fixed or replaced. How do I check if it is still under warranty and how do I send it in for repair?
legendary
Activity: 1078
Merit: 1024
August 20, 2017, 09:34:36 AM
#2
While switching the boards, was it still the same that wasn't working?
If so, the board is probably broken and you'll have to get it serviced if it's still under warranty.
newbie
Activity: 31
Merit: 0
August 19, 2017, 04:43:57 PM
#1
One hashboard on my s7 is not working. The asic status is showing dashes, and the asic number is 30, when its usually 45. I have tried hard/soft resetting, changing the place of the boards and changing psu but nothing seems to work. Any ideas?
http://imgur.com/a/V5uC0
Jump to: