Topic: Antminer s7 running under 2 GH/S (Read 181 times)
Yes, outlet voltage. You need to run that PSU on 220V to get full output, or get a small, cheap 600-750W PSU and power one board with that, and use the APW to power the other 2 and the controller.
On 110 or 220?
I don't know what that means.
Outlet voltage? If that's it, it is only 110
I don't know what that means.
Outlet voltage? If that's it, it is only 110
Bitmain APW3++
On 110 or 220? It'll be underpowered on 110 and could cause the symptoms you describe.
Give us a screenshot of the status page and maybe a dump of the kernel log if you want any help. We need details to assist.
Bitmain APW3++
What power supply are you using?
When I set it up it ran fine but after a few hours it nearly bottomed out. I unplugged and plugged it back and it picked up a bit but now it has slowed down again.
Temps are 50, or under, and ASIC is normal
https://imgur.com/Kyx73v4
Temps are 50, or under, and ASIC is normal
https://imgur.com/Kyx73v4
Jump to: