Topic: Antminer S7 Underclock? (Read 2699 times)
what is the lowest block speed it will run on? i need to run it at 300 what kind of ghs do you think i would get for 1 board at 300? 750 ghs? going to replace the bad s5 boards with 1 s7 board and if possable use my s5 fan' and heat sink for a more efficent mine.
you can also download a program called FING, it works great to find all connected ip. or just go in your router, and check connected devices.
Thanks for the info. I set my miner up at home and then brought it to school with me. The computer i have here cant run ipreporter, so i cant find the ip to control the miner. What else can i do (I have XP and Mac)
advanced-IP-scanner on XP
On Mac I use iNET-$9.99 in App store (bought it before for $4.99), works great
Alternately take the miner home & set the ip to a static one so when u move it to another network u can still get access to it to change the ip address to suit you network if necessary once moved
Thanks for the info. I set my miner up at home and then brought it to school with me. The computer i have here cant run ipreporter, so i cant find the ip to control the miner. What else can i do (I have XP and Mac)
mac has an ip appIt is on the App Store
I dont know what it was set to, i didnt change the default setting though
Thanks for the info. I set my miner up at home and then brought it to school with me. The computer i have here cant run ipreporter, so i cant find the ip to control the miner. What else can i do (I have XP and Mac)
I am assuming that since you are moving you miner around between different networks that you are leaving it set to DHCP right?
Thanks for the info. I set my miner up at home and then brought it to school with me. The computer i have here cant run ipreporter, so i cant find the ip to control the miner. What else can i do (I have XP and Mac)
Antminer S7 Batch 8 at Frequency 600 is 4,047 MH/s
But I suggest to use miners from Batch1-5 or Batch7 at lower frequency.
But I suggest to use miners from Batch1-5 or Batch7 at lower frequency.
good point my info was for a batch 1 and batch 2 miner.
screen shot is below is my batch 1 miner
fan at 30%
freq at 506
hash at 4175
temps are good
pretty quiet
lastly 0 hw's as in perfect.
Antminer S7 Batch 8 at Frequency 600 is 4,047 MH/s
But I suggest to use miners from Batch1-5 or Batch7 at lower frequency.
But I suggest to use miners from Batch1-5 or Batch7 at lower frequency.
Is there a way to lower the antminer s7 to under-clock it to around 4th/s. I dont really care about efficiency but its just so loud and i would prefer it a bit quieter. Thanks
yesI will post how for you.
Set. Freq to 500
Set fans to 30%
Check your numbers after five ten minutes.
You should be close to 4000gh close to fan speed of 2800rpm
Temps should be under 60c for safety
Is there a way to lower the antminer s7 to under-clock it to around 4th/s. I dont really care about efficiency but its just so loud and i would prefer it a bit quieter. Thanks
Jump to: