You can remove whistle sound by adding spacer between pull fan and miner. I used non working 12cmx25mm fan with removed propeller. Now I can use fan at 100% speed without ferry whistle.
Topic: Antminer S7 Whisteling sound (Read 987 times)
Yeah set your fans at 55% here is a secret top speed on these fans is about 4400
And 65-70% setting will get you to that 4400 level
55% should get you around 3500 to 3800 rpm
Do that and see if temps remain at 60 to 65 c
And 65-70% setting will get you to that 4400 level
55% should get you around 3500 to 3800 rpm
Do that and see if temps remain at 60 to 65 c
Hi there. I have bought some S7 Antminers from www.bitmart.co.za and they have this whistling sound that is tearing through your brain like a chainsaw. the only way i can prevent the whisteling sound is if i stick tape on the grid to try and restrict the airflow a little. Anyone else have this issue? what else can i do?
Yeah, mine does that when the fans are spinning close to max. I set my fans manually to a more pleasant % setting, watching temps of course. Got some other fans I'll be swapping out - was able to get my s5 to quiet down considerably, I'm pretty hopeful the same can be done with the 7's!
Hi there. I have bought some S7 Antminers from www.bitmart.co.za and they have this whistling sound that is tearing through your brain like a chainsaw. the only way i can prevent the whisteling sound is if i stick tape on the grid to try and restrict the airflow a little. Anyone else have this issue? what else can i do?
Jump to: