I had this problem today.
Miner wasn't broken....it was too cold.
if I saved you some hash blade repair cost satoshi's go here: 1J58WZ948mo3QCzhpZKWuVgaYvZQ6tjiTF
Topic: Antminer s7 wont hash (Read 1658 times)
Hi guys,
Just update the latest firmware first, if problem still occur please use bitmain method to test your psu.
Just update the latest firmware first, if problem still occur please use bitmain method to test your psu.
I have a similar situation. My s7 batch 19 was hashing fine for a week. Not it has a solid green light instead of a blinking (hashing) green light. When I log into system it says 0.0gh/s. Everything else appears normal and fans are blowing. I've tried a hard reset with paper clip but I guess I'll try the above too. Do I have to backup the image before trying a firmware update? Is an SD card required for firmware update? Thanks!
1st, please disconnect 1 of the hash PCB from the PCI-E power plug and try to operate with 2 hash PCB instead of 3. (If your S7 shuts down after a few minutes or not.) If the PSU was not strong enough, your 2 hash PCB method may let you keep mining without the unit being shut off or stop hashing in a few minutes.
If the above does not work, please try hashing with 1 hash PCB at a time. You may have a damaged hash PCB in the mix and it could be interrupting the other PCB to hash.
If none of the above works,
Please try updating to the newest firmware.
https://bitmaintech.com/support.htm?pid=00720160511022802617GoPmQhNb06CF
If the firmware update does not fix it, it is time to send it in for repair!
If the above does not work, please try hashing with 1 hash PCB at a time. You may have a damaged hash PCB in the mix and it could be interrupting the other PCB to hash.
If none of the above works,
Please try updating to the newest firmware.
https://bitmaintech.com/support.htm?pid=00720160511022802617GoPmQhNb06CF
If the firmware update does not fix it, it is time to send it in for repair!
Hi all =) got a problem whit my antminer s7
It was working fine for months wihout problems, then it just didnt want to hash anymore.. Now when i start it , it hash for 5 minutes then it looks like it freez totaly all the fans are working at100% but it wont hash. Then a restart it again and it hash for 5 mins and then it kinda freez again no hashing but fans are running at 100% and all the small green lights are on
anyone have a clue what this could be ?
It was working fine for months wihout problems, then it just didnt want to hash anymore.. Now when i start it , it hash for 5 minutes then it looks like it freez totaly all the fans are working at100% but it wont hash. Then a restart it again and it hash for 5 mins and then it kinda freez again no hashing but fans are running at 100% and all the small green lights are on
anyone have a clue what this could be ?
Hi all =) got a problem whit my antminer s7
It was working fine for months wihout problems, then it just didnt want to hash anymore.. Now when i start it , it hash for 5 minutes then it looks like it freez totaly all the fans are working at100% but it wont hash. Then a restart it again and it hash for 5 mins and then it kinda freez again no hashing but fans are running at 100% and all the small green lights are on
anyone have a clue what this could be ?
It was working fine for months wihout problems, then it just didnt want to hash anymore.. Now when i start it , it hash for 5 minutes then it looks like it freez totaly all the fans are working at100% but it wont hash. Then a restart it again and it hash for 5 mins and then it kinda freez again no hashing but fans are running at 100% and all the small green lights are on
anyone have a clue what this could be ?
Jump to: