Topic: Antminer S9 (Ayuda) (Read 195 times)

Sii en el pool me esta minando perfectamente, y me esta dando la misma cantidad de gh/s que la maquina.

en el pool de minado muestra algun hashrate? me imagino que no amigo se que la pregunta puede ser tonta pero quería verificar que no fuera un error de la lectura de hash en la maquina y en el pool si esta procesando los paquetes que envía sabes a que me refiero?

Empieza con la luz verde pero antes de eso sube y baja la velocidad del abanico, osea que unos 15 segundos hace mucho ruido (Como es normal) y dentro de 15 segundos no se escucha casi nada y repite el ciclo por mucho tiempo, es eso normal? o que crees que pase ?

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:

• 0
• 1

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]    Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000305] ps7-ttc #0 at df804000, irq=43
[    0.000614] Console: colour dummy device 80x30
[    0.000646] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090251] pid_max: default: 32768 minimum: 301
[    0.090469] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090489] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.092645] CPU: Testing write buffer coherency: ok
[    0.092983] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.093043] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.093266] L310 cache controller enabled
[    0.093286] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.171033] CPU1: Booted secondary processor
[    0.260226] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260356] Brought up 2 CPUs
[    0.260375] SMP: Total of 2 processors activated.
[    0.260384] CPU: All CPU(s) started in SVC mode.
[    0.261046] devtmpfs: initialized
[    0.263465] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264677] regulator-dummy: no parameters
[    0.271933] NET: Registered protocol family 16
[    0.274232] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.276524] cpuidle: using governor ladder
[    0.276538] cpuidle: using governor menu
[    0.283891] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.285406] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.285420] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.285534] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.307155] bio: create slab at 0
[    0.308582] vgaarb: loaded
[    0.309276] SCSI subsystem initialized
[    0.310170] usbcore: registered new interface driver usbfs
[    0.311021] usbcore: registered new interface driver hub
[    0.311414] usbcore: registered new device driver usb
[    0.311938] media: Linux media interface: v0.10
[    0.312093] Linux video capture interface: v2.00
[    0.312333] pps_core: LinuxPPS API ver. 1 registered
[    0.312345] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.312467] PTP clock support registered
[    0.312829] EDAC MC: Ver: 3.0.0
[    0.313868] Advanced Linux Sound Architecture Driver Initialized.
[    0.316707] DMA-API: preallocated 4096 debug entries
[    0.316721] DMA-API: debugging enabled by kernel config
[    0.316795] Switched to clocksource arm_global_timer
[    0.336701] NET: Registered protocol family 2
[    0.337510] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.337568] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.337654] TCP: Hash tables configured (established 4096 bind 4096)
[    0.337699] TCP: reno registered
[    0.337716] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.337747] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.337997] NET: Registered protocol family 1
[    0.338306] RPC: Registered named UNIX socket transport module.
[    0.338317] RPC: Registered udp transport module.
[    0.338326] RPC: Registered tcp transport module.
[    0.338334] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.338347] PCI: CLS 0 bytes, default 64
[    0.338791] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.340802] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.342922] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.343109] msgmni has been set to 967
[    0.343895] io scheduler noop registered
[    0.343908] io scheduler deadline registered
[    0.343944] io scheduler cfq registered (default)
[    0.353602] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.353622] dma-pl330 f8003000.ps7-dma:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.477327] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.045348] console [ttyPS0] enabled
[    1.049622] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.057279] [drm] Initialized drm 1.1.0 20060810
[    1.074200] brd: module loaded
[    1.083602] loop: module loaded
[    1.092920] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.098910] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.106611] libphy: XEMACPS mii bus: probed
[    1.111005] ------------- phy_id = 0x3625e62
[    1.115760] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.124316] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.130980] ehci-pci: EHCI PCI platform driver
[    1.138213] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.145016] usbcore: registered new interface driver usb-storage
[    1.151891] mousedev: PS/2 mouse device common for all mice
[    1.158094] i2c /dev entries driver
[    1.164979] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.170496] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.176376] Xilinx Zynq CpuIdle Driver started
[    1.181251] sdhci: Secure Digital Host Controller Interface driver
[    1.187438] sdhci: Copyright(c) Pierre Ossman
[    1.191710] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.198529] mmc0: no vqmmc regulator found
[    1.202546] mmc0: no vmmc regulator found
[    1.246821] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.257530] usbcore: registered new interface driver usbhid
[    1.263015] usbhid: USB HID core driver
[    1.267770] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.274041] nand: Micron MT29F2G08ABAEAWP
[    1.278088] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.283962] Bad block table found at page 131008, version 0x01
[    1.290190] Bad block table found at page 130944, version 0x01
[    1.296248] 3 ofpart partitions found on MTD device pl353-nand
[    1.302046] Creating 3 MTD partitions on "pl353-nand":
[    1.307149] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.315182] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.322514] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.331487] TCP: cubic registered
[    1.334725] NET: Registered protocol family 17
[    1.339451] Registering SWP/SWPB emulation handler
[    1.345329] regulator-dummy: disabling
[    1.349676] UBI: attaching mtd1 to ubi0
[    1.875303] UBI: scanning is finished
[    1.886932] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.893985] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.900783] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.907464] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.914295] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.920308] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.927419] UBI: max/mean erase counter: 228/128, WL threshold: 4096, image sequence number: 767909345
[    1.936691] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.945924] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.945930] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.949894] ALSA device list:
[    1.949898]   No soundcards found.
[    1.966263] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.995384] UBIFS: recovery needed
[    2.066161] UBIFS: recovery completed
[    2.069831] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.075756] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.084890] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.094781] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.099816] UBIFS: media format: w4/r0 (latest is w4/r0), UUID F4300A22-CCD3-41F9-98C8-CD0E0F28FD62, small LPT model
[    2.111338] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.118769] devtmpfs: mounted
[    2.121877] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.968916] random: dd urandom read with 0 bits of entropy available
[    3.356831]
[    3.356831] bcm54xx_config_init
[    3.966841]
[    3.966841] bcm54xx_config_init
[    7.967660] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    7.973769] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   25.708524] In axi fpga driver!
[   25.711593] request_mem_region OK!
[   25.714984] AXI fpga dev virtual address is 0xdf9fc000
[   25.720119] *base_vir_addr = 0x8c510
[   25.734858] In fpga mem driver!
[   25.738421] request_mem_region OK!
[   25.741926] fpga mem virtual address is 0xe2000000
[   26.506817]
[   26.506817] bcm54xx_config_init
[   27.136843]
[   27.136843] bcm54xx_config_init
[   31.137668] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   31.143777] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
Detect 512MB control board of XILINX
Miner Type = S9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
Fix freq=550 Chain[5] voltage_pic=6 value=940
Fix freq=550 Chain[6] voltage_pic=6 value=940
Fix freq=550 Chain[7] voltage_pic=6 value=940
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has no freq in PIC, set default freq=550M
Chain[J6] has no core num in PIC
Chain[J7] has no freq in PIC, set default freq=550M
Chain[J7] has no core num in PIC
Chain[J8] has no freq in PIC, set default freq=550M
Chain[J8] has no core num in PIC

Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Asic[ 0]:550
Asic[ 1]:550 Asic[ 2]:550 Asic[ 3]:550 Asic[ 4]:550 Asic[ 5]:550 Asic[ 6]:550 Asic[ 7]:550 Asic[ 8]:550
Asic[ 9]:550 Asic[10]:550 Asic[11]:550 Asic[12]:550 Asic[13]:550 Asic[14]:550 Asic[15]:550 Asic[16]:550
Asic[17]:550 Asic[18]:550 Asic[19]:550 Asic[20]:550 Asic[21]:550 Asic[22]:550 Asic[23]:550 Asic[24]:550
Asic[25]:550 Asic[26]:550 Asic[27]:550 Asic[28]:550 Asic[29]:550 Asic[30]:550 Asic[31]:550 Asic[32]:550
Asic[33]:550 Asic[34]:550 Asic[35]:550 Asic[36]:550 Asic[37]:550 Asic[38]:550 Asic[39]:550 Asic[40]:550
Asic[41]:550 Asic[42]:550 Asic[43]:550 Asic[44]:550 Asic[45]:550 Asic[46]:550 Asic[47]:550 Asic[48]:550
Asic[49]:550 Asic[50]:550 Asic[51]:550 Asic[52]:550 Asic[53]:550 Asic[54]:550 Asic[55]:550 Asic[56]:550
Asic[57]:550 Asic[58]:550 Asic[59]:550 Asic[60]:550 Asic[61]:550 Asic[62]:550
Chain:5 max freq=550
Chain:5 min freq=550

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Asic[ 0]:550
Asic[ 1]:550 Asic[ 2]:550 Asic[ 3]:550 Asic[ 4]:550 Asic[ 5]:550 Asic[ 6]:550 Asic[ 7]:550 Asic[ 8]:550
Asic[ 9]:550 Asic[10]:550 Asic[11]:550 Asic[12]:550 Asic[13]:550 Asic[14]:550 Asic[15]:550 Asic[16]:550
Asic[17]:550 Asic[18]:550 Asic[19]:550 Asic[20]:550 Asic[21]:550 Asic[22]:550 Asic[23]:550 Asic[24]:550
Asic[25]:550 Asic[26]:550 Asic[27]:550 Asic[28]:550 Asic[29]:550 Asic[30]:550 Asic[31]:550 Asic[32]:550
Asic[33]:550 Asic[34]:550 Asic[35]:550 Asic[36]:550 Asic[37]:550 Asic[38]:550 Asic[39]:550 Asic[40]:550
Asic[41]:550 Asic[42]:550 Asic[43]:550 Asic[44]:550 Asic[45]:550 Asic[46]:550 Asic[47]:550 Asic[48]:550
Asic[49]:550 Asic[50]:550 Asic[51]:550 Asic[52]:550 Asic[53]:550 Asic[54]:550 Asic[55]:550 Asic[56]:550
Asic[57]:550 Asic[58]:550 Asic[59]:550 Asic[60]:550 Asic[61]:550 Asic[62]:550
Chain:6 max freq=550
Chain:6 min freq=550

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Asic[ 0]:550
Asic[ 1]:550 Asic[ 2]:550 Asic[ 3]:550 Asic[ 4]:550 Asic[ 5]:550 Asic[ 6]:550 Asic[ 7]:550 Asic[ 8]:550
Asic[ 9]:550 Asic[10]:550 Asic[11]:550 Asic[12]:550 Asic[13]:550 Asic[14]:550 Asic[15]:550 Asic[16]:550
Asic[17]:550 Asic[18]:550 Asic[19]:550 Asic[20]:550 Asic[21]:550 Asic[22]:550 Asic[23]:550 Asic[24]:550
Asic[25]:550 Asic[26]:550 Asic[27]:550 Asic[28]:550 Asic[29]:550 Asic[30]:550 Asic[31]:550 Asic[32]:550
Asic[33]:550 Asic[34]:550 Asic[35]:550 Asic[36]:550 Asic[37]:550 Asic[38]:550 Asic[39]:550 Asic[40]:550
Asic[41]:550 Asic[42]:550 Asic[43]:550 Asic[44]:550 Asic[45]:550 Asic[46]:550 Asic[47]:550 Asic[48]:550
Asic[49]:550 Asic[50]:550 Asic[51]:550 Asic[52]:550 Asic[53]:550 Asic[54]:550 Asic[55]:550 Asic[56]:550
Asic[57]:550 Asic[58]:550 Asic[59]:550 Asic[60]:550 Asic[61]:550 Asic[62]:550
Chain:7 max freq=550
Chain:7 min freq=550

max freq = 550
set baud=2
Chain[J6] PIC temp offset=62,2,0,0,0,0,0,0
Chain[J6] chip[244] use PIC middle temp offset=2 typeID=55
New offset Chain[5] chip[244] local:33 remote:32 offset:31
Chain[J6] chip[244] get middle temp offset=31 typeID=55
Chain[J7] PIC temp offset=62,67,0,0,0,0,0,0
Chain[J7] chip[244] use PIC middle temp offset=67 typeID=55
New offset Chain[6] chip[244] local:33 remote:31 offset:32
Chain[J7] chip[244] get middle temp offset=32 typeID=55
Chain[J8] PIC temp offset=62,67,0,0,0,0,0,0
Chain[J8] chip[244] use PIC middle temp offset=67 typeID=55
New offset Chain[7] chip[244] local:33 remote:31 offset:32
Chain[J8] chip[244] get middle temp offset=32 typeID=55
Chain[J6] set working voltage=940 [6]
Chain[J7] set working voltage=940 [6]
Chain[J8] set working voltage=940 [6]
setStartTimePoint total_tv_start_sys=64 total_tv_end_sys=65
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=64.0720 Asic[02]=59.7430 Asic[03]=64.1560 Asic[04]=63.5520 Asic[05]=61.9910 Asic[06]=64.6250 Asic[07]=64.9270 Asic[08]=56.7060
Asic[09]=61.1020 Asic[10]=58.8200 Asic[11]=59.8270 Asic[12]=58.4350 Asic[13]=61.8910 Asic[14]=62.3270 Asic[15]=58.0820 Asic[16]=64.1720
Asic[17]=60.4480 Asic[18]=64.2730 Asic[19]=64.1050 Asic[20]=65.4980 Asic[21]=65.4640 Asic[22]=60.3470 Asic[23]=61.0850 Asic[24]=68.3000
Asic[25]=61.6220 Asic[26]=60.8670 Asic[27]=67.6280 Asic[28]=62.5950 Asic[29]=62.4440 Asic[30]=69.7260 Asic[31]=60.6660 Asic[32]=56.9080
Asic[33]=63.2330 Asic[34]=60.2970 Asic[35]=65.0950 Asic[36]=64.1220 Asic[37]=57.4280 Asic[38]=59.5420 Asic[39]=63.2500 Asic[40]=62.5620
Asic[41]=62.8640 Asic[42]=62.5950 Asic[43]=63.9210 Asic[44]=61.2870 Asic[45]=64.3900 Asic[46]=62.2260 Asic[47]=60.4480 Asic[48]=64.7760
Asic[49]=61.5220 Asic[50]=58.5860 Asic[51]=65.8670 Asic[52]=61.1360 Asic[53]=57.3780 Asic[54]=60.1790 Asic[55]=59.8270 Asic[56]=64.0050
Asic[57]=62.0580 Asic[58]=70.0780 Asic[59]=65.6490 Asic[60]=58.5020 Asic[61]=58.5350 Asic[62]=57.8810 Asic[63]=60.2460

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=66.1520 Asic[02]=61.5220 Asic[03]=60.6160 Asic[04]=61.3710 Asic[05]=60.2800 Asic[06]=63.9040 Asic[07]=60.3810 Asic[08]=61.1520
Asic[09]=61.6390 Asic[10]=61.4540 Asic[11]=64.5580 Asic[12]=61.8740 Asic[13]=60.5150 Asic[14]=60.8840 Asic[15]=62.4440 Asic[16]=59.7430
Asic[17]=60.9180 Asic[18]=60.4140 Asic[19]=63.7360 Asic[20]=66.9570 Asic[21]=61.4540 Asic[22]=58.7530 Asic[23]=61.0010 Asic[24]=63.9540
Asic[25]=64.6090 Asic[26]=62.0750 Asic[27]=62.2930 Asic[28]=62.0750 Asic[29]=64.2060 Asic[30]=62.6620 Asic[31]=65.1960 Asic[32]=64.2390
Asic[33]=62.3770 Asic[34]=66.0350 Asic[35]=62.6960 Asic[36]=58.6190 Asic[37]=64.3740 Asic[38]=61.2200 Asic[39]=63.6190 Asic[40]=63.1320
Asic[41]=60.6160 Asic[42]=59.9950 Asic[43]=60.8000 Asic[44]=65.0280 Asic[45]=64.7430 Asic[46]=69.0880 Asic[47]=63.2330 Asic[48]=63.1990
Asic[49]=63.3840 Asic[50]=57.1590 Asic[51]=63.8030 Asic[52]=64.1390 Asic[53]=62.8810 Asic[54]=65.2630 Asic[55]=61.5720 Asic[56]=65.1450
Asic[57]=69.2220 Asic[58]=63.5680 Asic[59]=62.0580 Asic[60]=59.8270 Asic[61]=64.8940 Asic[62]=62.4950 Asic[63]=58.5180

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=59.0390 Asic[02]=60.4650 Asic[03]=61.4710 Asic[04]=58.3510 Asic[05]=66.9570 Asic[06]=64.8100 Asic[07]=61.5550 Asic[08]=63.5180
Asic[09]=62.4440 Asic[10]=63.8370 Asic[11]=66.4200 Asic[12]=62.4950 Asic[13]=66.8230 Asic[14]=56.4380 Asic[15]=58.7530 Asic[16]=69.9440
Asic[17]=64.9110 Asic[18]=62.5110 Asic[19]=59.5920 Asic[20]=58.9550 Asic[21]=64.8270 Asic[22]=62.1590 Asic[23]=60.5150 Asic[24]=66.5380
Asic[25]=64.6590 Asic[26]=61.8570 Asic[27]=59.2730 Asic[28]=64.7600 Asic[29]=68.8360 Asic[30]=63.2830 Asic[31]=65.2630 Asic[32]=62.8810
Asic[33]=64.5750 Asic[34]=62.9140 Asic[35]=66.4370 Asic[36]=65.4470 Asic[37]=61.3370 Asic[38]=57.5120 Asic[39]=69.4570 Asic[40]=63.7530
Asic[41]=62.6120 Asic[42]=61.8570 Asic[43]=59.5250 Asic[44]=69.9270 Asic[45]=60.9850 Asic[46]=57.9980 Asic[47]=60.1120 Asic[48]=62.5620
Asic[49]=68.4340 Asic[50]=59.1060 Asic[51]=62.7130 Asic[52]=65.9680 Asic[53]=62.9640 Asic[54]=65.8000 Asic[55]=58.0150 Asic[56]=60.5650
Asic[57]=69.0550 Asic[58]=64.8100 Asic[59]=62.0420 Asic[60]=61.7560 Asic[61]=64.7430 Asic[62]=59.9950 Asic[63]=60.7830
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=31
Chain[5] Chip[62] local Temp=74
Chain[5] Chip[62] middle Temp=59
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=32
Chain[6] Chip[62] local Temp=72
Chain[6] Chip[62] middle Temp=55
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=32
Chain[7] Chip[62] local Temp=72
Chain[7] Chip[62] middle Temp=52
Done read temp on Chain[7]
set FAN speed according to: temp_highest=59 temp_top1[PWM_T]=59 temp_top1[TEMP_POS_LOCAL]=74 temp_change=5 fix_fan_steps=0
set normal FAN speed...with fix_fan_steps=0
FAN PWM: 38
read_temp_func Done!
CRC error counter=0

Hola, ¿Cuando enciendes el equipo este enciende la luz verde y parpadea o se muestra la luz roja en el arranque?
Eso puede suceder por que el fan de salida no tiene la salida adecuada, publica lo que te muestra el kernel para poder ayudarte.

Debes publicar lo que te aparece en el log tal cual como menciona rascao. Yo tengo tambien un s9, si tienes alguna duda puedes preguntarme también. Creo que puede ser la PSU.

Amigo metete en system- kernel log copi y pega lo que te dice al final cuando te da ese error para ver que puede estar pasando

Saludos, me gustaria saber si alguien me puede ayudar con esto, cada vez que enciendo la maquina me hace lo mismo al cabo de unos minutos y no se que hacer.
Por cierto tiene una luz roja parpadeando.

Aqui le dejo una imagen de como esta. https://ibb.co/ddPD4d