Grep bmminer not found means it crashed upon start of mining. This is a popular problem these days, and I suspect it's a power supply issue.
Are you using apw3 on 110v?
Topic: Antminer S9 - Error (Read 446 times)
Try to connect Miner DIRECTLY to your main internet Router!!!
Without switch or other secondary device. Directly into your main router.
Without switch or other secondary device. Directly into your main router.
I dont think that will be de solution.... i have L3+ and D3 connected with switch.... and works perfectly... L3+ / D3 has Cgminer by default.... each time i make IP Report Reset, its works and my internal S9 IP is different, the matter is not the connection
The matter is the BMminer, someone could got another alternative solution than bmminer-cgminer492 "Zwilla" update ?
thanks
Pretty obvious you're missing files needed to run the miner. Says so right in your kernel log, "bmminer not found"
What bsp says is irrelevant since you're not fully booting up.
What bsp says is irrelevant since you're not fully booting up.
Try to connect Miner DIRECTLY to your main internet Router!!!
Without switch or other secondary device. Directly into your main router.
Without switch or other secondary device. Directly into your main router.
Hi , guys my S9 AntMiner version its has the SD card slot on the left of the Ethernet interface.
I have tried Soft-Restore and IP Reporter Restore and its keep no showing-data un Miner Status Tab
Pool data are 3 slots filled and in Kernel Log appear this.....
Miner keep restarting in a loop !
Any idea thanks!
I have tried Soft-Restore and IP Reporter Restore and its keep no showing-data un Miner Status Tab
Pool data are 3 slots filled and in Kernel Log appear this.....
Code:
bmminer not found= 1876 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found=21834 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 8881 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
Miner keep restarting in a loop !
Any idea
thanks!
just change the pool and fill all the 3 pool
Hi guys.... in the log file.... it's appear " ASIC RT error: (asic index start from 1-63) " .
PSU is APW3++ (1600W) BITMAIN Official
Hard Reset you mean the button in the front ? thanks
There are 3 ways to reset S9.
I gave link earlier:
https://enforum.bitmain.com/bbs/topics/3957
Use the last version (Power off, power up while holding IP button for 5 seconds, release - unit restarts with factory settings)
I hope it helps.
Hi guys.... in the log file.... it's appear " ASIC RT error: (asic index start from 1-63) " .
PSU is APW3++ (1600W) BITMAIN Official
Hard Reset you mean the button in the front ? thanks
What psu are you using?
Hi, guys i am experimenting a weird error with my S9, it keep re-starting & No showing info in the Miner Status tab
Jump to: