Antminer S9 fan speed realy low | Bitcointalksearch.org

pupok

member

Activity: 79

Merit: 10

Quote from: takagari on November 29, 2016, 10:08:22 PM

reconnect the wire.. and stop cutting random wires.
It will drive the fan, but then cuts off the sensing to said fan so it's unsure of the fans rpm, thinks it's off, and shuts down the miner

i tried reconecting the cable already but still not working..
here is what it does when i connect it http://youtu.be/RyfUlgTclVg

(my other S9 is working just perfect after cutting the cables)

btw the miner is shutting off, it just stay ON..

takagari

legendary

Activity: 1050

Merit: 1000

reconnect the wire.. and stop cutting random wires.
It will drive the fan, but then cuts off the sensing to said fan so it's unsure of the fans rpm, thinks it's off, and shuts down the miner

pupok

member

Activity: 79

Merit: 10

i found a solution cutting the blue cable from the fans, i tried with the front one and it worked when tried with the back one the antminer stoped working.. i hear the fans but no lights turn on and i cant connect to it.. any help plz?

pupok

member

Activity: 79

Merit: 10

Quote from: gt_addict on November 29, 2016, 04:30:16 PM

I read a little while ago that awesome miner had trouble with S9 miners as the S7 runs cgminer and the S9 runs BMminer and awesmemminer software had trouble loading the correct values.

yeah they already updated it for S9

gt_addict

hero member

Activity: 2534

Merit: 623

I read a little while ago that awesome miner had trouble with S9 miners as the S7 runs cgminer and the S9 runs BMminer and awesmemminer software had trouble loading the correct values.

pupok

member

Activity: 79

Merit: 10

Quote from: gt_addict on November 29, 2016, 03:39:10 PM

Have you read the S9 thread. The S7 reports board temps and the S9 reports board and chip temps. Are you sure you are reading the same temps on each type of machine?

yes i have a program named awesomeminer, where i have temps of all miners in one GUI

gt_addict

hero member

Activity: 2534

Merit: 623

Have you read the S9 thread. The S7 reports board temps and the S9 reports board and chip temps. Are you sure you are reading the same temps on each type of machine?

pupok

member

Activity: 79

Merit: 10

Quote from: takagari on November 29, 2016, 01:23:03 PM

This has been beat to death, no real solutions thus far aside from bypassing and direct wiring the fans control.
Which leaves it blaring 24/7

hi is there a guide to do this?

takagari

legendary

Activity: 1050

Merit: 1000

This has been beat to death, no real solutions thus far aside from bypassing and direct wiring the fans control.
Which leaves it blaring 24/7

gt_addict

hero member

Activity: 2534

Merit: 623

Someone will pick it up eventually. You can always post again in a day or so if no one answers. Saves cluttering up the forum.

Try editing your post in the other thread with more information and see what happens.

pupok

member

Activity: 79

Merit: 10

Quote from: gt_addict on November 29, 2016, 12:40:59 PM

Firstly I see you have posted this question already in the CORRECT thread for the S9 already. Please wait for a response in there. You will need to provide more information, batch number, firmware version, even if the fans are original (any markings).

i just upgrade the firmware, its the lastest batch 13 TH, original fan everythig is brand new.

sorry about double post.. the other one have so many post maybe mine will be unoticiable.

gt_addict

hero member

Activity: 2534

Merit: 623

Firstly I see you have posted this question already in the CORRECT thread for the S9 already. Please wait for a response in there. You will need to provide more information, batch number, firmware version, even if the fans are original (any markings).

pupok

member

Activity: 79

Merit: 10

hi i just receive some antminers S9, but i cant edit their fan speed.. the fan speeds are realy slow and im getting high temps, i was getting 50/60 with my s7 now getting over 100 with S9 but its because fan speed.. any fix for this?

Topic: Antminer S9 fan speed realy low (Read 2200 times)