Hey guys,
so after about a year of mining my antminer broke. It doesn't show Hardware Version and BMminer Version. I googled and checked log, sure enough it reads:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000305] ps7-ttc #0 at f0006000, irq=43
[ 0.000614] Console: colour dummy device 80x30
[ 0.000653] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040207] pid_max: default: 32768 minimum: 301
[ 0.040432] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040454] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.042584] CPU: Testing write buffer coherency: ok
[ 0.042928] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042988] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043216] L310 cache controller enabled
[ 0.043235] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121031] CPU1: Booted secondary processor
[ 0.210227] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210359] Brought up 2 CPUs
[ 0.210379] SMP: Total of 2 processors activated.
[ 0.210387] CPU: All CPU(s) started in SVC mode.
[ 0.211041] devtmpfs: initialized
[ 0.213452] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214662] regulator-dummy: no parameters
[ 0.222348] NET: Registered protocol family 16
[ 0.224646] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226921] cpuidle: using governor ladder
[ 0.226934] cpuidle: using governor menu
[ 0.234378] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235895] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235909] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.236024] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.257724] bio: create slab at 0
[ 0.259154] vgaarb: loaded
[ 0.259866] SCSI subsystem initialized
[ 0.260845] usbcore: registered new interface driver usbfs
[ 0.261015] usbcore: registered new interface driver hub
[ 0.261373] usbcore: registered new device driver usb
[ 0.261893] media: Linux media interface: v0.10
[ 0.262049] Linux video capture interface: v2.00
[ 0.262286] pps_core: LinuxPPS API ver. 1 registered
[ 0.262298] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.262419] PTP clock support registered
[ 0.262775] EDAC MC: Ver: 3.0.0
[ 0.263814] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266658] DMA-API: preallocated 4096 debug entries
[ 0.266672] DMA-API: debugging enabled by kernel config
[ 0.266750] Switched to clocksource arm_global_timer
[ 0.286864] NET: Registered protocol family 2
[ 0.287562] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.287659] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.287817] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.287878] TCP: reno registered
[ 0.287898] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.287947] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.288218] NET: Registered protocol family 1
[ 0.288541] RPC: Registered named UNIX socket transport module.
[ 0.288554] RPC: Registered udp transport module.
[ 0.288562] RPC: Registered tcp transport module.
[ 0.288571] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288583] PCI: CLS 0 bytes, default 64
[ 0.289023] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.291039] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.292416] bounce pool size: 64 pages
[ 0.293319] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293512] msgmni has been set to 1486
[ 0.294288] io scheduler noop registered
[ 0.294301] io scheduler deadline registered
[ 0.294338] io scheduler cfq registered (default)
[ 0.303624] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.303645] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.425820] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.998043] console [ttyPS0] enabled
[ 1.002308] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.009956] [drm] Initialized drm 1.1.0 20060810
[ 1.027055] brd: module loaded
[ 1.036382] loop: module loaded
[ 1.045821] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.051807] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.059734] libphy: XEMACPS mii bus: probed
[ 1.064106] ------------- phy_id = 0x3625e62
[ 1.069066] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.077698] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.084316] ehci-pci: EHCI PCI platform driver
[ 1.091607] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.098447] usbcore: registered new interface driver usb-storage
[ 1.105307] mousedev: PS/2 mouse device common for all mice
[ 1.111436] i2c /dev entries driver
[ 1.118424] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.123905] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.129840] Xilinx Zynq CpuIdle Driver started
[ 1.134678] sdhci: Secure Digital Host Controller Interface driver
[ 1.140833] sdhci: Copyright(c) Pierre Ossman
[ 1.145115] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.151947] mmc0: no vqmmc regulator found
[ 1.155960] mmc0: no vmmc regulator found
[ 1.196766] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.205462] usbcore: registered new interface driver usbhid
[ 1.210976] usbhid: USB HID core driver
[ 1.215686] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.221990] nand: Micron MT29F2G08ABAEAWP
[ 1.225955] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.231912] Bad block table found at page 131008, version 0x01
[ 1.238148] Bad block table found at page 130944, version 0x01
[ 1.244198] 3 ofpart partitions found on MTD device pl353-nand
[ 1.249982] Creating 3 MTD partitions on "pl353-nand":
[ 1.255071] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.263128] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.270445] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.279394] TCP: cubic registered
[ 1.282628] NET: Registered protocol family 17
[ 1.287342] Registering SWP/SWPB emulation handler
[ 1.293259] regulator-dummy: disabling
[ 1.297630] UBI: attaching mtd1 to ubi0
[ 1.824010] UBI: scanning is finished
[ 1.835687] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.842766] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.849527] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.856191] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.863069] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.869050] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.876157] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1134783803
[ 1.885200] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.894417] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.894422] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.898394] ALSA device list:
[ 1.898398] No soundcards found.
[ 1.914774] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.943751] UBIFS: recovery needed
[ 2.043647] UBIFS: recovery completed
[ 2.047331] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.053252] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.062385] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.072271] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.077311] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[ 2.088603] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.096010] devtmpfs: mounted
[ 2.099137] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.946109] random: dd urandom read with 0 bits of entropy available
[ 3.336787]
[ 3.336787] bcm54xx_config_init
[ 3.946785]
[ 3.946785] bcm54xx_config_init
[ 7.947625] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.953732] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 22.621815] In axi fpga driver!
[ 22.624886] request_mem_region OK!
[ 22.628309] AXI fpga dev virtual address is 0xf01fe000
[ 22.633383] *base_vir_addr = 0x8c510
[ 22.648866] In fpga mem driver!
[ 22.651933] request_mem_region OK!
[ 22.655500] fpga mem virtual address is 0xf3000000
[ 23.456789]
[ 23.456789] bcm54xx_config_init
[ 24.086809]
[ 24.086809] bcm54xx_config_init
[ 29.087627] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 29.093733] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
This is XILINX board. Totalram: 1039794176
Detect 1GB control board of XILINX
DETECT HW version=0008c510
miner ID : 8174cc2e4b590854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:22] [63:5] [63:24] [63:25] [63:81] [63:7] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[2] has core num=7
Chain[5] ASIC[14] has core num=1
Chain[5] ASIC[17] has core num=1
Chain[5] ASIC[29] has core num=1
Chain[5] ASIC[50] has core num=1
Chain[5] ASIC[56] has core num=1
Chain[5] ASIC[58] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:22] [63:5] [63:24] [63:25] [63:40] [63:81] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[3] has core num=1
Chain[6] ASIC[6] has core num=1
Chain[6] ASIC[16] has core num=2
Chain[6] ASIC[39] has core num=1
Chain[6] ASIC[43] has core num=7
Chain[6] ASIC[55] has core num=1
Chain[6] ASIC[59] has core num=2
Chain[6] ASIC[62] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:25] [63:19] [63:80] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[10] has core num=1
Chain[7] ASIC[17] has core num=11
Chain[7] ASIC[22] has core num=1
Chain[7] ASIC[25] has core num=1
Chain[7] ASIC[28] has core num=1
Chain[7] ASIC[45] has core num=12
Chain[7] ASIC[53] has core num=1
Chain[7] ASIC[56] has core num=9
Chain[7] ASIC[57] has core num=1
Chain[7] ASIC[61] has core num=3
Check chain[7] PIC fw version=0x03
get PIC voltage=74 on chain[5], value=900
get PIC voltage=74 on chain[6], value=900
get PIC voltage=74 on chain[7], value=900
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,-4,32,-5,0,0,0,0
chain[5] temp chip I2C addr=0x98
chain[6] temp offset record: 62,-4,32,-6,0,0,0,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,-4,32,-6,0,0,0,0
chain[7] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1448 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8174cc2e4b590854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=3240
get fan[2] speed=3240
get fan[2] speed=3240
get fan[2] speed=3240
get fan[3] speed=840
get fan[2] speed=3240
get fan[3] speed=840
get fan[2] speed=3240
get fan[3] speed=840
get fan[5] speed=9240
get fan[2] speed=3240
get fan[3] speed=840
get fan[5] speed=9240
get fan[2] speed=3240
get fan[3] speed=840
get fan[5] speed=9240
get fan[2] speed=3240
get fan[3] speed=840
get fan[5] speed=9240
get fan[2] speed=3240
get fan[3] speed=840
get fan[5] speed=9240
get fan[2] speed=3240
get fan[3] speed=840
get fan[5] speed=9240
get fan[2] speed=3240
get fan[3] speed=840
get fan[5] speed=9240
get fan[2] speed=3240
get fan[3] speed=840
get fan[5] speed=9240
get fan[2] speed=3240
get fan[3] speed=840
get fan[5] speed=9240
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9240
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9240
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9240
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9240
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9240
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9120
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9120
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9120
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9120
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9120
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9120
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9120
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9120
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9120
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9120
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9120
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9120
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9120
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9120
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9120
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9120
get fan[2] speed=3480
get fan[3] speed=840
get fan[5] speed=9120
Fatal Error: some Fan lost or Fan speed low!
I know antminer won't boot if fan's speed ≤3000... but why there are 3 fans in this log? My best assumption is that control board is busted or short-circuitet.
But if I change fan's connectors the log looks like this:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000306] ps7-ttc #0 at f0006000, irq=43
[ 0.000614] Console: colour dummy device 80x30
[ 0.000652] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[ 0.090254] pid_max: default: 32768 minimum: 301
[ 0.090475] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.090498] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.092620] CPU: Testing write buffer coherency: ok
[ 0.092966] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.093026] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.093252] L310 cache controller enabled
[ 0.093271] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.171039] CPU1: Booted secondary processor
[ 0.260229] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.260360] Brought up 2 CPUs
[ 0.260379] SMP: Total of 2 processors activated.
[ 0.260387] CPU: All CPU(s) started in SVC mode.
[ 0.261037] devtmpfs: initialized
[ 0.263444] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.264647] regulator-dummy: no parameters
[ 0.272346] NET: Registered protocol family 16
[ 0.274537] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.276816] cpuidle: using governor ladder
[ 0.276830] cpuidle: using governor menu
[ 0.284278] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.285795] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.285809] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.285923] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.307400] bio: create slab at 0
[ 0.308800] vgaarb: loaded
[ 0.309530] SCSI subsystem initialized
[ 0.310754] usbcore: registered new interface driver usbfs
[ 0.310930] usbcore: registered new interface driver hub
[ 0.311882] usbcore: registered new device driver usb
[ 0.312441] media: Linux media interface: v0.10
[ 0.312599] Linux video capture interface: v2.00
[ 0.312837] pps_core: LinuxPPS API ver. 1 registered
[ 0.312849] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.312978] PTP clock support registered
[ 0.313329] EDAC MC: Ver: 3.0.0
[ 0.314371] Advanced Linux Sound Architecture Driver Initialized.
[ 0.316749] DMA-API: preallocated 4096 debug entries
[ 0.316764] DMA-API: debugging enabled by kernel config
[ 0.316839] Switched to clocksource arm_global_timer
[ 0.336609] NET: Registered protocol family 2
[ 0.337322] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.337421] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.337580] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.337641] TCP: reno registered
[ 0.337660] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.337710] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.337977] NET: Registered protocol family 1
[ 0.338329] RPC: Registered named UNIX socket transport module.
[ 0.338341] RPC: Registered udp transport module.
[ 0.338350] RPC: Registered tcp transport module.
[ 0.338359] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.338372] PCI: CLS 0 bytes, default 64
[ 0.338817] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.340844] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.342228] bounce pool size: 64 pages
[ 0.343109] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.343309] msgmni has been set to 1486
[ 0.344100] io scheduler noop registered
[ 0.344114] io scheduler deadline registered
[ 0.344155] io scheduler cfq registered (default)
[ 0.352103] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.352124] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.475719] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.048509] console [ttyPS0] enabled
[ 1.052779] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.060430] [drm] Initialized drm 1.1.0 20060810
[ 1.077363] brd: module loaded
[ 1.086697] loop: module loaded
[ 1.096136] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.101916] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.109836] libphy: XEMACPS mii bus: probed
[ 1.114204] ------------- phy_id = 0x3625e62
[ 1.119156] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.127972] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.134593] ehci-pci: EHCI PCI platform driver
[ 1.141824] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.148646] usbcore: registered new interface driver usb-storage
[ 1.155520] mousedev: PS/2 mouse device common for all mice
[ 1.161680] i2c /dev entries driver
[ 1.168640] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.174131] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.180083] Xilinx Zynq CpuIdle Driver started
[ 1.184920] sdhci: Secure Digital Host Controller Interface driver
[ 1.191041] sdhci: Copyright(c) Pierre Ossman
[ 1.195352] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.202232] mmc0: no vqmmc regulator found
[ 1.206249] mmc0: no vmmc regulator found
[ 1.246867] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.255565] usbcore: registered new interface driver usbhid
[ 1.261077] usbhid: USB HID core driver
[ 1.265803] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.272104] nand: Micron MT29F2G08ABAEAWP
[ 1.276063] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.282012] Bad block table found at page 131008, version 0x01
[ 1.288239] Bad block table found at page 130944, version 0x01
[ 1.294290] 3 ofpart partitions found on MTD device pl353-nand
[ 1.300072] Creating 3 MTD partitions on "pl353-nand":
[ 1.305161] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.313207] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.320543] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.329501] TCP: cubic registered
[ 1.332735] NET: Registered protocol family 17
[ 1.337449] Registering SWP/SWPB emulation handler
[ 1.343397] regulator-dummy: disabling
[ 1.347747] UBI: attaching mtd1 to ubi0
[ 1.874232] UBI: scanning is finished
[ 1.885849] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.892933] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.899695] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.906359] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.913237] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.919217] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.926325] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1134783803
[ 1.935368] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.944584] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.944590] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.948552] ALSA device list:
[ 1.948555] No soundcards found.
[ 1.964936] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.993890] UBIFS: recovery needed
[ 2.061456] UBIFS: recovery completed
[ 2.065125] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.071071] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.080175] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.090065] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.095094] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[ 2.106388] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.113807] devtmpfs: mounted
[ 2.116942] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.957738] random: dd urandom read with 0 bits of entropy available
[ 3.356864]
[ 3.356864] bcm54xx_config_init
[ 3.966872]
[ 3.966872] bcm54xx_config_init
[ 7.967716] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.973821] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 22.596717] In axi fpga driver!
[ 22.599823] request_mem_region OK!
[ 22.603179] AXI fpga dev virtual address is 0xf01fe000
[ 22.608329] *base_vir_addr = 0x8c510
[ 22.624266] In fpga mem driver!
[ 22.627370] request_mem_region OK!
[ 22.630907] fpga mem virtual address is 0xf3000000
[ 23.416855]
[ 23.416855] bcm54xx_config_init
[ 24.046861]
[ 24.046861] bcm54xx_config_init
[ 28.047845] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 28.053952] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
This is XILINX board. Totalram: 1039794176
Detect 1GB control board of XILINX
DETECT HW version=0008c510
miner ID : 8174cc2e4b590854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:22] [63:5] [63:24] [63:25] [63:81] [63:7] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[2] has core num=7
Chain[5] ASIC[14] has core num=1
Chain[5] ASIC[17] has core num=1
Chain[5] ASIC[29] has core num=1
Chain[5] ASIC[50] has core num=1
Chain[5] ASIC[56] has core num=1
Chain[5] ASIC[58] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:22] [63:5] [63:24] [63:25] [63:40] [63:81] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[3] has core num=1
Chain[6] ASIC[6] has core num=1
Chain[6] ASIC[16] has core num=2
Chain[6] ASIC[39] has core num=1
Chain[6] ASIC[43] has core num=7
Chain[6] ASIC[55] has core num=1
Chain[6] ASIC[59] has core num=2
Chain[6] ASIC[62] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:25] [63:19] [63:80] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[10] has core num=1
Chain[7] ASIC[17] has core num=11
Chain[7] ASIC[22] has core num=1
Chain[7] ASIC[25] has core num=1
Chain[7] ASIC[28] has core num=1
Chain[7] ASIC[45] has core num=12
Chain[7] ASIC[53] has core num=1
Chain[7] ASIC[56] has core num=9
Chain[7] ASIC[57] has core num=1
Chain[7] ASIC[61] has core num=3
Check chain[7] PIC fw version=0x03
get PIC voltage=74 on chain[5], value=900
get PIC voltage=74 on chain[6], value=900
get PIC voltage=74 on chain[7], value=900
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,-4,32,-5,0,0,0,0
chain[5] temp chip I2C addr=0x98
chain[6] temp offset record: 62,-4,32,-6,0,0,0,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,-4,32,-6,0,0,0,0
chain[7] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1376 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8174cc2e4b590854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=9120
get fan[2] speed=9120
get fan[2] speed=9120
get fan[2] speed=9120
get fan[4] speed=840
get fan[2] speed=9120
get fan[4] speed=840
get fan[2] speed=9120
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=9120
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=9120
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=9120
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=9120
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=9120
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=9120
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=9120
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=9120
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=9000
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=9000
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=9000
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=9000
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=9000
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=9000
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=9000
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=9000
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=9000
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=9000
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=8880
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=8880
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=8880
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=8880
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=8880
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=8880
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=8880
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=8880
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=8880
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=8880
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=8880
get fan[4] speed=840
get fan[5] speed=30600
get fan[2] speed=8880
get fan[4] speed=840
get fan[5] speed=30600
Fatal Error: some Fan lost or Fan speed low!
It seems like 5 and 2 are the actual fans. But what are fan[3] and fan[4] in those logs that prevent miner from booting due to low RPM? Any ideas how to fix this?
This is good to know!