I just tried /sbin/reboot and it restarted a board that would not restart using the gui reboot. Thanks guys
Glad I could help! I haven't yet found any difference between /sbin/reboot and physically power cycling the miner. 
Topic: Antminer S9 Hard Reboot (Read 217 times)
I just tried /sbin/reboot and it restarted a board that would not restart using the gui reboot. Thanks guys
You can try this method from here On-board auto reboot with Antminer S9 (daily reboots) At least you can do the hard reboot automatically and schedule what time you want to reboot it.
For now, I don't find any methods that you can fully reboot remotely your miner, the above link maybe solved your issue.
For now, I don't find any methods that you can fully reboot remotely your miner, the above link maybe solved your issue.
I have found you really need to power cycle the unit to reinitialize cards that are having issues. You can buy a device that allows you to SSH in and physically switch power on and off
You want something like this:
https://www.amazon.com/D-Link-Energy-Monitoring-Amazon-DSP-W215/dp/B00K4YEI28/
Obviously you need to make sure it supports your PSU (110v versus 220v) and the proper amperage.
The link I posted was for informational use only, it is not a specific recommendation.
You want something like this:
https://www.amazon.com/D-Link-Energy-Monitoring-Amazon-DSP-W215/dp/B00K4YEI28/
Obviously you need to make sure it supports your PSU (110v versus 220v) and the proper amperage.
The link I posted was for informational use only, it is not a specific recommendation.
GUI reboot is soft reboot. Also the API reboot call is a soft reboot.
If you use putty you can access the shell and then run /sbin/reboot which seems equivalent to a hard reboot.
If you use putty you can access the shell and then run /sbin/reboot which seems equivalent to a hard reboot.
Hello and thanks ahead of time. Is there a way to hard reboot (power cycle or equivalent) an antminer s9 remotely? The reboot in the gui doesnt seem to fix alot of issues that a hard reboot (unplug/replug) solves. I can use putty to access the miner. Just wondering if there are linux commands to shutdown and restart that is equivalent to a hard reboot.
The only way to perform a hard reboot is to remove the power and re apply it, unless you have a smart PDU or someone to unplug it / disconnect the power I don't think you'll be able to do what you want.
Hello and thanks ahead of time. Is there a way to hard reboot (power cycle or equivalent) an antminer s9 remotely? The reboot in the gui doesnt seem to fix alot of issues that a hard reboot (unplug/replug) solves. I can use putty to access the miner. Just wondering if there are linux commands to shutdown and restart that is equivalent to a hard reboot.
Jump to: