Si aga è proprio quello che farò...
Topic: Antminer S9 problemi (Read 154 times)
Grazie aga,come sempre..Dopo aver provato ciò che mi hai scritto la conclusione è che la scheda e kaputt..Fortuna che avendolo preso su amazon e avendo già contattato il rivenditore lo posso restituire senza problemi..La mia solita fortuna..
Beh... quello che puoi fare ( tanto fino a Lunedì non riparte...) è lasciare staccata la hashboard incriminata ( sia alimentazione che cavo dati) e far andare il miner con le 2 hashboard funzionanti.... almeno va x queste 24/48 ore...... e cominci a vedere come si comporta..... Infelicemente certe volte capita... a me è successo con un E3 bitmain nuovo ( acquisto diretto da bitmain) e dopo un po con un F1 Blackminer...( sempre acquisto diretto dal produttore...) ( il secondo l'ho dovuto rispedire in cina..... non ti dico il macello tra spese di sped e soprattutto quando mi è tornato indietro... la dogana lo fermò ed hai voglia di spiegargli che era una riparazione a costo zero.... non ammettevano di non poter lucrarci su qualcosa.....)
Grazie aga,come sempre..Dopo aver provato ciò che mi hai scritto la conclusione è che la scheda e kaputt..Fortuna che avendolo preso su amazon e avendo già contattato il rivenditore lo posso restituire senza problemi..La mia solita fortuna..
Da immagine... ( devi sistemare i link... si vede solo se lo copi.... riporto qua il tuo link per comodità... https://imagizer.imageshack.com/img923/1074/AWBMYo.png ) ti manca giusto giusto una scheda.... ( il sistema non la vede....)
Questa è l'immagine del mio S9 quando lo avevo...
Le temperature riportate sulle due schede sono anche corrette...direi che fino agli 80/85 gradi il miner lavora senza intoppi...
Visto che hai già provato a scambiare i molex di alimentazione parto dall'idea che la parte relativa all'alimentatore sia ok...
rimangono ancora 4 dubbi...
1 il connettore dati della scheda ( improbabile )
2 il cavo dati dalla scheda al controller ( improbabile )
3 il connettore sul controller ( improbabile )
4 la hashboard andata ( probabile )
Operazione da fare:
A Prendi il cavo dati della chain 6 o 8 ( che dall'immagine sembra lavorino bene ) sganciala dalla hashboard sana e collegala alla hashboard incriminata, la parte connessa al controller non staccarla.
B Disalimenta la hashboard a cui non arriva più il cavo dati.
C Adesso alimenta il miner ( sempre alimentando anche il cotroller... mi raccomando... ) , in questo modo dovrebbe partire con 2 hashboard...
D verifica che succede....
Se la hashboard incriminata si mette a funzionare bene ( ovvero la vedi nelle impostazioni del miner , ha pochi HW ovvero Hardware Error e lavori sui 9 GH ) il problema è o il cavo dati rovinato oppure il connettore sul controller che da noie... se va ancora in crisi ( anche dopo un pò ) oppure peggio... non la vede proprio allora il problema è la hashboard e lì non puoi farci molto.....
Ps Attento agli asic status.. se o allora ok, se x allora il chip è in crisi..., più HW è basso ( zero è l'ideale ma dopo un pò è difficile ) meglio è, se la temp si alza troppo gli hw error cominciano a salire oppure alcuni asic in estrema difficoltà vanno dalla condizione o alla condizione x.
Facci sapere.
Ciao!
Questa è l'immagine del mio S9 quando lo avevo...
Le temperature riportate sulle due schede sono anche corrette...direi che fino agli 80/85 gradi il miner lavora senza intoppi...
Visto che hai già provato a scambiare i molex di alimentazione parto dall'idea che la parte relativa all'alimentatore sia ok...
rimangono ancora 4 dubbi...
1 il connettore dati della scheda ( improbabile )
2 il cavo dati dalla scheda al controller ( improbabile )
3 il connettore sul controller ( improbabile )
4 la hashboard andata ( probabile )
Operazione da fare:
A Prendi il cavo dati della chain 6 o 8 ( che dall'immagine sembra lavorino bene ) sganciala dalla hashboard sana e collegala alla hashboard incriminata, la parte connessa al controller non staccarla.
B Disalimenta la hashboard a cui non arriva più il cavo dati.
C Adesso alimenta il miner ( sempre alimentando anche il cotroller... mi raccomando... ) , in questo modo dovrebbe partire con 2 hashboard...
D verifica che succede....
Se la hashboard incriminata si mette a funzionare bene ( ovvero la vedi nelle impostazioni del miner , ha pochi HW ovvero Hardware Error e lavori sui 9 GH ) il problema è o il cavo dati rovinato oppure il connettore sul controller che da noie... se va ancora in crisi ( anche dopo un pò ) oppure peggio... non la vede proprio allora il problema è la hashboard e lì non puoi farci molto.....
Ps Attento agli asic status.. se o allora ok, se x allora il chip è in crisi..., più HW è basso ( zero è l'ideale ma dopo un pò è difficile ) meglio è, se la temp si alza troppo gli hw error cominciano a salire oppure alcuni asic in estrema difficoltà vanno dalla condizione o alla condizione x.
Facci sapere.
Ciao!
Ciao a tutti,ho installato ieri un antminer s9 per fare un pò di pratica col mining ..Ho riscontrato questo problema,solo 2 delle 3 schede madri hanno luce rossa accesa e minano..La terza luce spenta.Le prove che ho fatto vista la mia poca conoscenza
sono state:cambio ordine dei connettori problema non risolto,quindi escludo sia un problema di alimentatore,reset impostazioni di fabbrica(una volta fatto il reset tutte e 3 le luci erano accese..)e aggiornamento firmware..Dalla pool alla partenza dopo aggiornamento mi ha dato per circa 10 minuti hash di 14 th poi è passato a 9 e stamattina si è stabilizzato a 7,16 th(che mi sembrano pochi visto che il miner lavora a 9 come da immagine.[url]https://imagizer.imageshack.com/img923/1074/AWBMYo.png[url]..)Credo che il problema possa risiedere nei dissipatori di calore della scheda spenta che non dissipando bene mandano in protezione la stessa che viene spenta..Allego kerner log.Grazie
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc:
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06da8ac (6987 kB)
[ 0.000000] .init : 0xc06db000 - 0xc070e380 ( 205 kB)
[ 0.000000] .data : 0xc0710000 - 0xc0757138 ( 285 kB)
[ 0.000000] .bss : 0xc0757144 - 0xc0797bfc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000299] ps7-ttc #0 at df804000, irq=43
[ 0.000604] Console: colour dummy device 80x30
[ 0.000633] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[ 0.090245] pid_max: default: 32768 minimum: 301
[ 0.090455] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090475] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.092670] CPU: Testing write buffer coherency: ok
[ 0.092988] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.093047] Setting up static identity map for 0x4cb118 - 0x4cb170
[ 0.093265] L310 cache controller enabled
[ 0.093285] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.170987] CPU1: Booted secondary processor
[ 0.260221] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.260351] Brought up 2 CPUs
[ 0.260370] SMP: Total of 2 processors activated.
[ 0.260378] CPU: All CPU(s) started in SVC mode.
[ 0.261037] devtmpfs: initialized
[ 0.263476] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.264675] regulator-dummy: no parameters
[ 0.272067] NET: Registered protocol family 16
[ 0.274291] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.276562] cpuidle: using governor ladder
[ 0.276576] cpuidle: using governor menu
[ 0.283986] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.285506] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.285519] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.285631] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.307353] bio: create slab at 0
[ 0.308764] vgaarb: loaded
[ 0.309476] SCSI subsystem initialized
[ 0.310513] usbcore: registered new interface driver usbfs
[ 0.310686] usbcore: registered new interface driver hub
[ 0.310912] usbcore: registered new device driver usb
[ 0.311556] media: Linux media interface: v0.10
[ 0.311712] Linux video capture interface: v2.00
[ 0.311948] pps_core: LinuxPPS API ver. 1 registered
[ 0.311960] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.312081] PTP clock support registered
[ 0.312437] EDAC MC: Ver: 3.0.0
[ 0.313618] Advanced Linux Sound Architecture Driver Initialized.
[ 0.316356] DMA-API: preallocated 4096 debug entries
[ 0.316369] DMA-API: debugging enabled by kernel config
[ 0.316449] Switched to clocksource arm_global_timer
[ 0.336378] NET: Registered protocol family 2
[ 0.337421] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.337477] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.337562] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.337606] TCP: reno registered
[ 0.337622] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.337653] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.338124] NET: Registered protocol family 1
[ 0.338554] RPC: Registered named UNIX socket transport module.
[ 0.338567] RPC: Registered udp transport module.
[ 0.338575] RPC: Registered tcp transport module.
[ 0.338584] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.338596] PCI: CLS 0 bytes, default 64
[ 0.339027] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.341020] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.343101] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.343301] msgmni has been set to 967
[ 0.344064] io scheduler noop registered
[ 0.344079] io scheduler deadline registered
[ 0.344115] io scheduler cfq registered (default)
[ 0.357151] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.357171] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.481750] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.048823] console [ttyPS0] enabled
[ 1.053070] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.060687] [drm] Initialized drm 1.1.0 20060810
[ 1.077714] brd: module loaded
[ 1.087104] loop: module loaded
[ 1.096609] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.102361] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.110452] libphy: XEMACPS mii bus: probed
[ 1.114817] ------------- phy_id = 0x3625e62
[ 1.119792] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.128491] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.135110] ehci-pci: EHCI PCI platform driver
[ 1.142340] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.149193] usbcore: registered new interface driver usb-storage
[ 1.156020] mousedev: PS/2 mouse device common for all mice
[ 1.162148] i2c /dev entries driver
[ 1.169115] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.174597] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.180505] Xilinx Zynq CpuIdle Driver started
[ 1.185350] sdhci: Secure Digital Host Controller Interface driver
[ 1.191487] sdhci: Copyright(c) Pierre Ossman
[ 1.195784] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.202645] mmc0: no vqmmc regulator found
[ 1.206681] mmc0: no vmmc regulator found
[ 1.246467] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.255130] usbcore: registered new interface driver usbhid
[ 1.260638] usbhid: USB HID core driver
[ 1.265334] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.271625] nand: Micron MT29F2G08ABAEAWP
[ 1.275600] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.281545] Bad block table found at page 131008, version 0x01
[ 1.287760] Bad block table found at page 130944, version 0x01
[ 1.293809] 3 ofpart partitions found on MTD device pl353-nand
[ 1.299581] Creating 3 MTD partitions on "pl353-nand":
[ 1.304686] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.312745] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.320058] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.330785] TCP: cubic registered
[ 1.334025] NET: Registered protocol family 17
[ 1.338720] Registering SWP/SWPB emulation handler
[ 1.344617] regulator-dummy: disabling
[ 1.348939] UBI: attaching mtd1 to ubi0
[ 1.736356] UBI: scanning is finished
[ 1.748186] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.755239] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.762035] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.768712] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.775549] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.781559] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.788669] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1885751282
[ 1.797700] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.806917] UBI: background thread "ubi_bgt0d" started, PID 1084
[ 1.806923] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.810895] ALSA device list:
[ 1.810898] No soundcards found.
[ 1.827714] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[ 1.947232] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.953156] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.962296] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 1.972173] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 1.977213] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 169D5274-BC1D-448D-AF98-689AB312947D, small LPT model
[ 2.008698] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.020474] devtmpfs: mounted
[ 2.023581] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[ 3.185805] random: dd urandom read with 1 bits of entropy available
[ 3.776498]
[ 3.776498] bcm54xx_config_init
[ 4.386463]
[ 4.386463] bcm54xx_config_init
[ 8.387317] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 8.393425] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 22.617922] In axi fpga driver!
[ 22.620988] request_mem_region OK!
[ 22.624378] AXI fpga dev virtual address is 0xdf9fe000
[ 22.629513] *base_vir_addr = 0xc51e
[ 22.644304] In fpga mem driver!
[ 22.647577] request_mem_region OK!
[ 22.651077] fpga mem virtual address is 0xe2000000
[ 23.426492]
[ 23.426492] bcm54xx_config_init
[ 24.056493]
[ 24.056493] bcm54xx_config_init
[ 28.057293] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 28.063401] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 560.423232]
[ 560.423232] bcm54xx_config_init
[ 564.424089] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 564.430200] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 1400.697771] random: nonblocking pool is initialized
log_level = 4
This is XILINX board. Totalram: 507486208
Detect 512MB control board of XILINX
mmap axi_fpga_addr = 0xb6f24000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5d1d000
forceFreq=-1 forceFlag=0
min work minertest[0]:912
DETECT HW version=0000c51e
miner ID : 80122d4966008814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[55] has core num=1
Chain[5] ASIC[56] has core num=2
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[5] has core num=8
Chain[6] ASIC[7] has core num=2
Chain[6] ASIC[16] has core num=5
Chain[6] ASIC[19] has core num=1
Chain[6] ASIC[23] has core num=1
Chain[6] ASIC[29] has core num=15
Chain[6] ASIC[55] has core num=1
Chain[6] ASIC[59] has core num=15
Chain[6] ASIC[60] has core num=15
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[13] has core num=3
Chain[7] ASIC[15] has core num=7
Chain[7] ASIC[29] has core num=1
Chain[7] ASIC[42] has core num=15
Chain[7] ASIC[60] has core num=8
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[5], value=940
get PIC voltage=6 on chain[6], value=940
get PIC voltage=6 on chain[7], value=940
chain[5] temp offset record: 62,0,0,0,0,0,41,28
chain[5] temp chip I2C addr=0x9a
chain[6] temp offset record: 62,0,0,0,0,0,41,28
chain[6] temp chip I2C addr=0x9a
chain[7] temp offset record: 62,0,0,0,0,0,41,28
chain[7] temp chip I2C addr=0x9a
total_exist_chain_num = 3
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 3, total chain num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1455 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found=21235 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 8530 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Mon Mar 4 11:37:08 CST 2019 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 80122d4966008814
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[4] speed=5640
get fan[5] speed=5880
get fan[4] speed=5640
get fan[5] speed=5880
get fan[4] speed=5640
get fan[5] speed=5880
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=870
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=870
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=91 value=890
Chain[J7] orignal chain_voltage_pic=6 value=940
Chain[J7] will use backup chain_voltage_pic=870 [125]
Chain[J7] get working chain_voltage_pic=125
Chain[J8] orignal chain_voltage_pic=125 value=870
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[55] has core num=1
Chain[J6] ASIC[56] has core num=2
Chain[J8] has core num in PIC
Chain[J8] ASIC[13] has core num=3
Chain[J8] ASIC[15] has core num=7
Chain[J8] ASIC[29] has core num=1
Chain[J8] ASIC[42] has core num=15
Chain[J8] ASIC[60] has core num=8
miner total rate=9196GH/s fixed rate=9000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=662
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Detect a bad chip=42 on chain[7], fixed to 400M
Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=662
max freq = 662
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,41,28
chain[5] temp chip I2C addr=0x9a
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:40 remote:40 offset:31
Chain[J6] chip[244] get middle temp offset=31 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,41,28
chain[7] temp chip I2C addr=0x9a
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:37 remote:37 offset:31
Chain[J8] chip[244] get middle temp offset=31 typeID=55
Chain[J6] set working voltage=890 [91]
Chain[J8] set working voltage=870 [125]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25924
last_nonce_num:10975
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=911 asic[14]=912 asic[15]=911
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=911 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[13]=911
core[110]=7
asic[15]=911
core[058]=7
asic[60]=911
core[058]=7
freq[00]=662 freq[01]=662 freq[02]=662 freq[03]=662 freq[04]=662 freq[05]=662 freq[06]=662 freq[07]=662
freq[08]=662 freq[09]=662 freq[10]=662 freq[11]=662 freq[12]=662 freq[13]=662 freq[14]=662 freq[15]=662
freq[16]=662 freq[17]=662 freq[18]=662 freq[19]=662 freq[20]=662 freq[21]=662 freq[22]=662 freq[23]=662
freq[24]=662 freq[25]=662 freq[26]=662 freq[27]=662 freq[28]=662 freq[29]=662 freq[30]=662 freq[31]=662
freq[32]=662 freq[33]=662 freq[34]=662 freq[35]=662 freq[36]=662 freq[37]=662 freq[38]=662 freq[39]=662
freq[40]=662 freq[41]=662 freq[42]=662 freq[43]=662 freq[44]=662 freq[45]=662 freq[46]=662 freq[47]=662
freq[48]=662 freq[49]=662 freq[50]=662 freq[51]=662 freq[52]=662 freq[53]=662 freq[54]=662 freq[55]=662
freq[56]=662 freq[57]=662 freq[58]=662 freq[59]=662 freq[60]=662 freq[61]=662 freq[62]=662
total valid nonce number:57453
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26979
last_nonce_num:34530
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=547 total_tv_end_sys=548
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=71.6050 Asic[02]=69.9100 Asic[03]=72.1080 Asic[04]=70.0950 Asic[05]=74.9430 Asic[06]=74.2890 Asic[07]=68.6690 Asic[08]=65.4470
Asic[09]=73.5510 Asic[10]=72.7460 Asic[11]=75.2790 Asic[12]=70.2790 Asic[13]=73.0640 Asic[14]=62.5110 Asic[15]=70.9670 Asic[16]=70.8500
Asic[17]=72.7120 Asic[18]=77.3090 Asic[19]=71.7220 Asic[20]=77.6440 Asic[21]=74.1380 Asic[22]=68.0140 Asic[23]=76.1680 Asic[24]=71.2520
Asic[25]=70.6650 Asic[26]=69.6590 Asic[27]=72.4940 Asic[28]=70.1950 Asic[29]=70.5140 Asic[30]=72.1580 Asic[31]=65.2800 Asic[32]=67.9980
Asic[33]=67.7790 Asic[34]=69.5410 Asic[35]=70.8660 Asic[36]=70.7660 Asic[37]=73.6350 Asic[38]=72.0240 Asic[39]=72.1920 Asic[40]=70.1450
Asic[41]=67.5950 Asic[42]=71.5040 Asic[43]=72.2250 Asic[44]=71.9740 Asic[45]=74.4900 Asic[46]=70.9840 Asic[47]=64.9270 Asic[48]=79.0200
Asic[49]=76.2520 Asic[50]=71.0510 Asic[51]=72.0070 Asic[52]=75.4970 Asic[53]=75.9330 Asic[54]=69.8090 Asic[55]=72.9970 Asic[56]=75.3120
Asic[57]=68.0140 Asic[58]=72.7460 Asic[59]=69.7090 Asic[60]=72.2760 Asic[61]=74.8090 Asic[62]=67.8630 Asic[63]=64.5410
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=77.5270 Asic[02]=78.2320 Asic[03]=76.7050 Asic[04]=83.8350 Asic[05]=77.2590 Asic[06]=70.8500 Asic[07]=71.0170 Asic[08]=75.6980
Asic[09]=72.2930 Asic[10]=77.7620 Asic[11]=71.2520 Asic[12]=73.7020 Asic[13]=79.4900 Asic[14]=75.1950 Asic[15]=73.0140 Asic[16]=72.5610
Asic[17]=73.3660 Asic[18]=73.1980 Asic[19]=80.7650 Asic[20]=79.3390 Asic[21]=77.8120 Asic[22]=74.3900 Asic[23]=71.2020 Asic[24]=75.7650
Asic[25]=79.3390 Asic[26]=71.8060 Asic[27]=78.1810 Asic[28]=75.3800 Asic[29]=74.9430 Asic[30]=78.9870 Asic[31]=77.0910 Asic[32]=75.3460
Asic[33]=74.0040 Asic[34]=73.3160 Asic[35]=78.7350 Asic[36]=71.1180 Asic[37]=75.7490 Asic[38]=76.8730 Asic[39]=70.7150 Asic[40]=76.0840
Asic[41]=76.4530 Asic[42]=74.5070 Asic[43]=47.3110 Asic[44]=76.5710 Asic[45]=74.7250 Asic[46]=75.2790 Asic[47]=78.3160 Asic[48]=76.2180
Asic[49]=75.9500 Asic[50]=74.5240 Asic[51]=71.3530 Asic[52]=82.8620 Asic[53]=78.3320 Asic[54]=76.4030 Asic[55]=74.8930 Asic[56]=72.0740
Asic[57]=78.0470 Asic[58]=77.5770 Asic[59]=75.4630 Asic[60]=80.9160 Asic[61]=78.3660 Asic[62]=77.0740 Asic[63]=75.6980
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=31
Chain[5] Chip[62] local Temp=62
Chain[5] Chip[62] middle Temp=44
Special fix Chain[5] Chip[62] middle Temp = 77
Done read temp on Chain[5]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=31
Chain[7] Chip[62] local Temp=58
Chain[7] Chip[62] middle Temp=42
Special fix Chain[7] Chip[62] middle Temp = 73
Done read temp on Chain[7]
set FAN speed according to: temp_highest=62 temp_top1[PWM_T]=62 temp_top1[TEMP_POS_LOCAL]=62 temp_change=0 fix_fan_steps=0
FAN PWM: 74
read_temp_func Done!
CRC error counter=2
sono state:cambio ordine dei connettori problema non risolto,quindi escludo sia un problema di alimentatore,reset impostazioni di fabbrica(una volta fatto il reset tutte e 3 le luci erano accese..)e aggiornamento firmware..Dalla pool alla partenza dopo aggiornamento mi ha dato per circa 10 minuti hash di 14 th poi è passato a 9 e stamattina si è stabilizzato a 7,16 th(che mi sembrano pochi visto che il miner lavora a 9 come da immagine.[url]https://imagizer.imageshack.com/img923/1074/AWBMYo.png[url]..)Credo che il problema possa risiedere nei dissipatori di calore della scheda spenta che non dissipando bene mandano in protezione la stessa che viene spenta..Allego kerner log.Grazie
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc:
- 0
- 1
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06da8ac (6987 kB)
[ 0.000000] .init : 0xc06db000 - 0xc070e380 ( 205 kB)
[ 0.000000] .data : 0xc0710000 - 0xc0757138 ( 285 kB)
[ 0.000000] .bss : 0xc0757144 - 0xc0797bfc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000299] ps7-ttc #0 at df804000, irq=43
[ 0.000604] Console: colour dummy device 80x30
[ 0.000633] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[ 0.090245] pid_max: default: 32768 minimum: 301
[ 0.090455] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090475] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.092670] CPU: Testing write buffer coherency: ok
[ 0.092988] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.093047] Setting up static identity map for 0x4cb118 - 0x4cb170
[ 0.093265] L310 cache controller enabled
[ 0.093285] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.170987] CPU1: Booted secondary processor
[ 0.260221] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.260351] Brought up 2 CPUs
[ 0.260370] SMP: Total of 2 processors activated.
[ 0.260378] CPU: All CPU(s) started in SVC mode.
[ 0.261037] devtmpfs: initialized
[ 0.263476] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.264675] regulator-dummy: no parameters
[ 0.272067] NET: Registered protocol family 16
[ 0.274291] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.276562] cpuidle: using governor ladder
[ 0.276576] cpuidle: using governor menu
[ 0.283986] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.285506] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.285519] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.285631] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.307353] bio: create slab
[ 0.308764] vgaarb: loaded
[ 0.309476] SCSI subsystem initialized
[ 0.310513] usbcore: registered new interface driver usbfs
[ 0.310686] usbcore: registered new interface driver hub
[ 0.310912] usbcore: registered new device driver usb
[ 0.311556] media: Linux media interface: v0.10
[ 0.311712] Linux video capture interface: v2.00
[ 0.311948] pps_core: LinuxPPS API ver. 1 registered
[ 0.311960] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.312081] PTP clock support registered
[ 0.312437] EDAC MC: Ver: 3.0.0
[ 0.313618] Advanced Linux Sound Architecture Driver Initialized.
[ 0.316356] DMA-API: preallocated 4096 debug entries
[ 0.316369] DMA-API: debugging enabled by kernel config
[ 0.316449] Switched to clocksource arm_global_timer
[ 0.336378] NET: Registered protocol family 2
[ 0.337421] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.337477] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.337562] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.337606] TCP: reno registered
[ 0.337622] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.337653] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.338124] NET: Registered protocol family 1
[ 0.338554] RPC: Registered named UNIX socket transport module.
[ 0.338567] RPC: Registered udp transport module.
[ 0.338575] RPC: Registered tcp transport module.
[ 0.338584] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.338596] PCI: CLS 0 bytes, default 64
[ 0.339027] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.341020] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.343101] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.343301] msgmni has been set to 967
[ 0.344064] io scheduler noop registered
[ 0.344079] io scheduler deadline registered
[ 0.344115] io scheduler cfq registered (default)
[ 0.357151] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.357171] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.481750] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.048823] console [ttyPS0] enabled
[ 1.053070] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.060687] [drm] Initialized drm 1.1.0 20060810
[ 1.077714] brd: module loaded
[ 1.087104] loop: module loaded
[ 1.096609] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.102361] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.110452] libphy: XEMACPS mii bus: probed
[ 1.114817] ------------- phy_id = 0x3625e62
[ 1.119792] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.128491] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.135110] ehci-pci: EHCI PCI platform driver
[ 1.142340] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.149193] usbcore: registered new interface driver usb-storage
[ 1.156020] mousedev: PS/2 mouse device common for all mice
[ 1.162148] i2c /dev entries driver
[ 1.169115] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.174597] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.180505] Xilinx Zynq CpuIdle Driver started
[ 1.185350] sdhci: Secure Digital Host Controller Interface driver
[ 1.191487] sdhci: Copyright(c) Pierre Ossman
[ 1.195784] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.202645] mmc0: no vqmmc regulator found
[ 1.206681] mmc0: no vmmc regulator found
[ 1.246467] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.255130] usbcore: registered new interface driver usbhid
[ 1.260638] usbhid: USB HID core driver
[ 1.265334] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.271625] nand: Micron MT29F2G08ABAEAWP
[ 1.275600] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.281545] Bad block table found at page 131008, version 0x01
[ 1.287760] Bad block table found at page 130944, version 0x01
[ 1.293809] 3 ofpart partitions found on MTD device pl353-nand
[ 1.299581] Creating 3 MTD partitions on "pl353-nand":
[ 1.304686] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.312745] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.320058] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.330785] TCP: cubic registered
[ 1.334025] NET: Registered protocol family 17
[ 1.338720] Registering SWP/SWPB emulation handler
[ 1.344617] regulator-dummy: disabling
[ 1.348939] UBI: attaching mtd1 to ubi0
[ 1.736356] UBI: scanning is finished
[ 1.748186] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.755239] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.762035] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.768712] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.775549] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.781559] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.788669] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1885751282
[ 1.797700] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.806917] UBI: background thread "ubi_bgt0d" started, PID 1084
[ 1.806923] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.810895] ALSA device list:
[ 1.810898] No soundcards found.
[ 1.827714] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[ 1.947232] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.953156] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.962296] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 1.972173] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 1.977213] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 169D5274-BC1D-448D-AF98-689AB312947D, small LPT model
[ 2.008698] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.020474] devtmpfs: mounted
[ 2.023581] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[ 3.185805] random: dd urandom read with 1 bits of entropy available
[ 3.776498]
[ 3.776498] bcm54xx_config_init
[ 4.386463]
[ 4.386463] bcm54xx_config_init
[ 8.387317] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 8.393425] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 22.617922] In axi fpga driver!
[ 22.620988] request_mem_region OK!
[ 22.624378] AXI fpga dev virtual address is 0xdf9fe000
[ 22.629513] *base_vir_addr = 0xc51e
[ 22.644304] In fpga mem driver!
[ 22.647577] request_mem_region OK!
[ 22.651077] fpga mem virtual address is 0xe2000000
[ 23.426492]
[ 23.426492] bcm54xx_config_init
[ 24.056493]
[ 24.056493] bcm54xx_config_init
[ 28.057293] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 28.063401] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 560.423232]
[ 560.423232] bcm54xx_config_init
[ 564.424089] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 564.430200] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 1400.697771] random: nonblocking pool is initialized
log_level = 4
This is XILINX board. Totalram: 507486208
Detect 512MB control board of XILINX
mmap axi_fpga_addr = 0xb6f24000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5d1d000
forceFreq=-1 forceFlag=0
min work minertest[0]:912
DETECT HW version=0000c51e
miner ID : 80122d4966008814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[55] has core num=1
Chain[5] ASIC[56] has core num=2
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[5] has core num=8
Chain[6] ASIC[7] has core num=2
Chain[6] ASIC[16] has core num=5
Chain[6] ASIC[19] has core num=1
Chain[6] ASIC[23] has core num=1
Chain[6] ASIC[29] has core num=15
Chain[6] ASIC[55] has core num=1
Chain[6] ASIC[59] has core num=15
Chain[6] ASIC[60] has core num=15
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[13] has core num=3
Chain[7] ASIC[15] has core num=7
Chain[7] ASIC[29] has core num=1
Chain[7] ASIC[42] has core num=15
Chain[7] ASIC[60] has core num=8
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[5], value=940
get PIC voltage=6 on chain[6], value=940
get PIC voltage=6 on chain[7], value=940
chain[5] temp offset record: 62,0,0,0,0,0,41,28
chain[5] temp chip I2C addr=0x9a
chain[6] temp offset record: 62,0,0,0,0,0,41,28
chain[6] temp chip I2C addr=0x9a
chain[7] temp offset record: 62,0,0,0,0,0,41,28
chain[7] temp chip I2C addr=0x9a
total_exist_chain_num = 3
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 3, total chain num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1455 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found=21235 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 8530 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Mon Mar 4 11:37:08 CST 2019 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 80122d4966008814
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[4] speed=5640
get fan[5] speed=5880
get fan[4] speed=5640
get fan[5] speed=5880
get fan[4] speed=5640
get fan[5] speed=5880
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=870
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=870
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=91 value=890
Chain[J7] orignal chain_voltage_pic=6 value=940
Chain[J7] will use backup chain_voltage_pic=870 [125]
Chain[J7] get working chain_voltage_pic=125
Chain[J8] orignal chain_voltage_pic=125 value=870
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[55] has core num=1
Chain[J6] ASIC[56] has core num=2
Chain[J8] has core num in PIC
Chain[J8] ASIC[13] has core num=3
Chain[J8] ASIC[15] has core num=7
Chain[J8] ASIC[29] has core num=1
Chain[J8] ASIC[42] has core num=15
Chain[J8] ASIC[60] has core num=8
miner total rate=9196GH/s fixed rate=9000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=662
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Detect a bad chip=42 on chain[7], fixed to 400M
Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=662
max freq = 662
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,41,28
chain[5] temp chip I2C addr=0x9a
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:40 remote:40 offset:31
Chain[J6] chip[244] get middle temp offset=31 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,41,28
chain[7] temp chip I2C addr=0x9a
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:37 remote:37 offset:31
Chain[J8] chip[244] get middle temp offset=31 typeID=55
Chain[J6] set working voltage=890 [91]
Chain[J8] set working voltage=870 [125]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25924
last_nonce_num:10975
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=911 asic[14]=912 asic[15]=911
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=911 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[13]=911
core[110]=7
asic[15]=911
core[058]=7
asic[60]=911
core[058]=7
freq[00]=662 freq[01]=662 freq[02]=662 freq[03]=662 freq[04]=662 freq[05]=662 freq[06]=662 freq[07]=662
freq[08]=662 freq[09]=662 freq[10]=662 freq[11]=662 freq[12]=662 freq[13]=662 freq[14]=662 freq[15]=662
freq[16]=662 freq[17]=662 freq[18]=662 freq[19]=662 freq[20]=662 freq[21]=662 freq[22]=662 freq[23]=662
freq[24]=662 freq[25]=662 freq[26]=662 freq[27]=662 freq[28]=662 freq[29]=662 freq[30]=662 freq[31]=662
freq[32]=662 freq[33]=662 freq[34]=662 freq[35]=662 freq[36]=662 freq[37]=662 freq[38]=662 freq[39]=662
freq[40]=662 freq[41]=662 freq[42]=662 freq[43]=662 freq[44]=662 freq[45]=662 freq[46]=662 freq[47]=662
freq[48]=662 freq[49]=662 freq[50]=662 freq[51]=662 freq[52]=662 freq[53]=662 freq[54]=662 freq[55]=662
freq[56]=662 freq[57]=662 freq[58]=662 freq[59]=662 freq[60]=662 freq[61]=662 freq[62]=662
total valid nonce number:57453
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26979
last_nonce_num:34530
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=547 total_tv_end_sys=548
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=71.6050 Asic[02]=69.9100 Asic[03]=72.1080 Asic[04]=70.0950 Asic[05]=74.9430 Asic[06]=74.2890 Asic[07]=68.6690 Asic[08]=65.4470
Asic[09]=73.5510 Asic[10]=72.7460 Asic[11]=75.2790 Asic[12]=70.2790 Asic[13]=73.0640 Asic[14]=62.5110 Asic[15]=70.9670 Asic[16]=70.8500
Asic[17]=72.7120 Asic[18]=77.3090 Asic[19]=71.7220 Asic[20]=77.6440 Asic[21]=74.1380 Asic[22]=68.0140 Asic[23]=76.1680 Asic[24]=71.2520
Asic[25]=70.6650 Asic[26]=69.6590 Asic[27]=72.4940 Asic[28]=70.1950 Asic[29]=70.5140 Asic[30]=72.1580 Asic[31]=65.2800 Asic[32]=67.9980
Asic[33]=67.7790 Asic[34]=69.5410 Asic[35]=70.8660 Asic[36]=70.7660 Asic[37]=73.6350 Asic[38]=72.0240 Asic[39]=72.1920 Asic[40]=70.1450
Asic[41]=67.5950 Asic[42]=71.5040 Asic[43]=72.2250 Asic[44]=71.9740 Asic[45]=74.4900 Asic[46]=70.9840 Asic[47]=64.9270 Asic[48]=79.0200
Asic[49]=76.2520 Asic[50]=71.0510 Asic[51]=72.0070 Asic[52]=75.4970 Asic[53]=75.9330 Asic[54]=69.8090 Asic[55]=72.9970 Asic[56]=75.3120
Asic[57]=68.0140 Asic[58]=72.7460 Asic[59]=69.7090 Asic[60]=72.2760 Asic[61]=74.8090 Asic[62]=67.8630 Asic[63]=64.5410
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=77.5270 Asic[02]=78.2320 Asic[03]=76.7050 Asic[04]=83.8350 Asic[05]=77.2590 Asic[06]=70.8500 Asic[07]=71.0170 Asic[08]=75.6980
Asic[09]=72.2930 Asic[10]=77.7620 Asic[11]=71.2520 Asic[12]=73.7020 Asic[13]=79.4900 Asic[14]=75.1950 Asic[15]=73.0140 Asic[16]=72.5610
Asic[17]=73.3660 Asic[18]=73.1980 Asic[19]=80.7650 Asic[20]=79.3390 Asic[21]=77.8120 Asic[22]=74.3900 Asic[23]=71.2020 Asic[24]=75.7650
Asic[25]=79.3390 Asic[26]=71.8060 Asic[27]=78.1810 Asic[28]=75.3800 Asic[29]=74.9430 Asic[30]=78.9870 Asic[31]=77.0910 Asic[32]=75.3460
Asic[33]=74.0040 Asic[34]=73.3160 Asic[35]=78.7350 Asic[36]=71.1180 Asic[37]=75.7490 Asic[38]=76.8730 Asic[39]=70.7150 Asic[40]=76.0840
Asic[41]=76.4530 Asic[42]=74.5070 Asic[43]=47.3110 Asic[44]=76.5710 Asic[45]=74.7250 Asic[46]=75.2790 Asic[47]=78.3160 Asic[48]=76.2180
Asic[49]=75.9500 Asic[50]=74.5240 Asic[51]=71.3530 Asic[52]=82.8620 Asic[53]=78.3320 Asic[54]=76.4030 Asic[55]=74.8930 Asic[56]=72.0740
Asic[57]=78.0470 Asic[58]=77.5770 Asic[59]=75.4630 Asic[60]=80.9160 Asic[61]=78.3660 Asic[62]=77.0740 Asic[63]=75.6980
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=31
Chain[5] Chip[62] local Temp=62
Chain[5] Chip[62] middle Temp=44
Special fix Chain[5] Chip[62] middle Temp = 77
Done read temp on Chain[5]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=31
Chain[7] Chip[62] local Temp=58
Chain[7] Chip[62] middle Temp=42
Special fix Chain[7] Chip[62] middle Temp = 73
Done read temp on Chain[7]
set FAN speed according to: temp_highest=62 temp_top1[PWM_T]=62 temp_top1[TEMP_POS_LOCAL]=62 temp_change=0 fix_fan_steps=0
FAN PWM: 74
read_temp_func Done!
CRC error counter=2
Jump to: