I tried upgrading the firmware, then tried the package fix and now the miner won't even show as online in the IP Scanner and the Fault (red) light is on.
Topic: Antminer S9 showing no data (Read 392 times)
Have you managed to fix this? If yes, how?
I tried upgrading the firmware, then tried the package fix and now the miner won't even show as online in the IP Scanner and the Fault (red) light is on.
I tried upgrading the firmware, then tried the package fix and now the miner won't even show as online in the IP Scanner and the Fault (red) light is on.
Did you tried to made an sdcard bootable for your s9?
I just found a tutorial but i don't know if it will work in antminer s9 because the guide given is for antminer s2 but you can get idea how he made a bootable sd card for antminer just use the firmware antminer s9 from bitmain link that i previously posted here https://support.myrig.com/hc/en-us/articles/204339655-How-to-create-a-bootable-MicroSD-card-with-factory-setting-
For safety i recommend to contact the bitmaintech support in order to help you out about your unit https://twitter.com/bitmaintech
Or contact the bitmain support https://support.bitmain.com/hc/en-us/requests/new
Just contact them if your unit is under warranty or if not you can also try and maybe they can give you flash tools to reflash the whole program of antminer s9..
I just found a tutorial but i don't know if it will work in antminer s9 because the guide given is for antminer s2 but you can get idea how he made a bootable sd card for antminer just use the firmware antminer s9 from bitmain link that i previously posted here https://support.myrig.com/hc/en-us/articles/204339655-How-to-create-a-bootable-MicroSD-card-with-factory-setting-
For safety i recommend to contact the bitmaintech support in order to help you out about your unit https://twitter.com/bitmaintech
Or contact the bitmain support https://support.bitmain.com/hc/en-us/requests/new
Just contact them if your unit is under warranty or if not you can also try and maybe they can give you flash tools to reflash the whole program of antminer s9..
Dumb question, but... Did you leave it for at least 10 minutes for it to start working?
Yea its been on for a while, it just running with the fault light on and no lights on the hashing boards, fan does speed up abit (once or twice with an the hour id say)it does start up fine by the looks of it with the normal things going on, fans kicking in, lights flashing on the hashboards, green light flashes afew times.
Cant work it out must be soft bricked or something?
EDIT- oh yea no kernel log or monitor both blank pages
Dumb question, but... Did you leave it for at least 10 minutes for it to start working?
Is my 'Data Circuit Board' broke?
Have you tried the IP reporter hard reset?
Ill try it now (finger crossed)EDIT- No, still showing no info/data on the overview page
Have you tried the IP reporter hard reset?
Try this package and maybe it can solve your issue https://shop.bitmain.com/support.htm?pid=007201611260753443104jm60Q6L0639
And also this one for list of firmware https://shop.bitmain.com/support.htm?pid=00720161126080548570Q2tDBXAH065D
I heard that there is sd card flashing guide but i don't know how this works but here i found the tools and you can flash your unit without going to tab or page for flashing..
check here https://shop.bitmain.com/support.htm?pid=007201604120945219855QObfk20066C
Just remind you that be careful when flashing it can be hard brick the unit.. So Backup and wait for flashing to be finished before you restart your s9..
And also this one for list of firmware https://shop.bitmain.com/support.htm?pid=00720161126080548570Q2tDBXAH065D
I heard that there is sd card flashing guide but i don't know how this works but here i found the tools and you can flash your unit without going to tab or page for flashing..
check here https://shop.bitmain.com/support.htm?pid=007201604120945219855QObfk20066C
Just remind you that be careful when flashing it can be hard brick the unit.. So Backup and wait for flashing to be finished before you restart your s9..
I've tried to flash 's9 fix update' with no luck, again the page just crashs
Am i not bricked already?
Thats what im trying to look into, SD flashing but not finding any info really
I can go to the tab for flashing, load the file to be flashed but after a minute or so the page will crash
Try this package and maybe it can solve your issue https://shop.bitmain.com/support.htm?pid=007201611260753443104jm60Q6L0639
And also this one for list of firmware https://shop.bitmain.com/support.htm?pid=00720161126080548570Q2tDBXAH065D
I heard that there is sd card flashing guide but i don't know how this works but here i found the tools and you can flash your unit without going to tab or page for flashing..
check here https://shop.bitmain.com/support.htm?pid=007201604120945219855QObfk20066C
Just remind you that be careful when flashing it can be hard brick the unit.. So Backup and wait for flashing to be finished before you restart your s9..
Follow this guide https://bitcointalksearch.org/topic/guide-dogies-comprehensive-bitmain-antminer-s9-setup-hd-1526215
Flashing is the only way to solve this issue.. I heard this issue in antminer s5 and solved after reflash it in latest version..
Maybe the firmware is corrupted that is why no overview..
I can go to the tab for flashing, load the file to be flashed but after a minute or so the page will crash Flashing is the only way to solve this issue.. I heard this issue in antminer s5 and solved after reflash it in latest version..
Maybe the firmware is corrupted that is why no overview..
Follow this guide https://bitcointalksearch.org/topic/guide-dogies-comprehensive-bitmain-antminer-s9-setup-hd-1526215
Flashing latest firmware is the only way that i know to solve this issue.. I heard the same issue before in antminer s5 and solved after reflash in latest firmware..
Maybe your firmware is corrupted that is why no overview..
Flashing latest firmware is the only way that i know to solve this issue.. I heard the same issue before in antminer s5 and solved after reflash in latest firmware..
Maybe your firmware is corrupted that is why no overview..
Hi, For some reason my s9's wont show me any data and just red lights nearly straight away from starting up, i get one flash of green then red (fault).
https://i.imgur.com/Sqs7zh9.png
Tried resetting with no luck and cant flash firmware either
Any help would be great
Cheers, James
https://i.imgur.com/Sqs7zh9.png
Tried resetting with no luck and cant flash firmware either
Any help would be great
Cheers, James
Jump to: