The temp6, temp7, temp8 are the air temperatures near the back of each board (bitmain refers to them as pcb temps).
On the other hand, the temp2_6, temp2_7, and temp2_8 are chip temperatures, so they will generally always be higher than the exhaust air temperatures.
Topic: Antminer S9 temperatures in STATS (Read 183 times)
Hi all, in the STATS from any given S9 I see:
My question is what temperature is temp6 reporting vs temp2_6? The temp2_6 value is what's reported on the miner status page. Just wondering because the temp2_6 value is always higher...
Code:
"temp1": 0,
"temp10": 0,
"temp11": 0,
"temp12": 0,
"temp13": 0,
"temp14": 0,
"temp15": 0,
"temp16": 0,
"temp2": 0,
"temp2_1": 0,
"temp2_10": 0,
"temp2_11": 0,
"temp2_12": 0,
"temp2_13": 0,
"temp2_14": 0,
"temp2_15": 0,
"temp2_16": 0,
"temp2_2": 0,
"temp2_3": 0,
"temp2_4": 0,
"temp2_5": 0,
"temp2_6": 76,
"temp2_7": 67,
"temp2_8": 65,
"temp2_9": 0,
"temp3": 0,
"temp3_1": 0,
"temp3_10": 0,
"temp3_11": 0,
"temp3_12": 0,
"temp3_13": 0,
"temp3_14": 0,
"temp3_15": 0,
"temp3_16": 0,
"temp3_2": 0,
"temp3_3": 0,
"temp3_4": 0,
"temp3_5": 0,
"temp3_6": 0,
"temp3_7": 0,
"temp3_8": 0,
"temp3_9": 0,
"temp4": 0,
"temp5": 0,
"temp6": 61,
"temp7": 52,
"temp8": 50,
"temp9": 0,
"temp_max": 61,
"temp_num": 3,
My question is what temperature is temp6 reporting vs temp2_6? The temp2_6 value is what's reported on the miner status page. Just wondering because the temp2_6 value is always higher...
Jump to: