Author

Topic: Antminer S9 troubleshooting - bootloop and possible malf. chip (Read 229 times)

mikeywith

legendary

Activity: 2436

Merit: 6643

be constructive or S.T.F.U

Quote from: alfredwallace on March 10, 2021, 06:11:12 PM

You talk about phill but I don't know who he is ?

philipma1957, a fellow bitcointalk member, a very nice lad.

Quote from: alfredwallace on March 10, 2021, 06:11:12 PM

I was afraid that it will consume power for the second hashboard but I guess no if he don't detect it. I can too unplug the second hashboard from power.

It won't consume power, maybe a tiny amount, but it will slow down the boot, the miner will keep trying to read asics for a few seconds, so just unplug the power cord and leave it there.

Quote from: alfredwallace on March 10, 2021, 06:11:12 PM

At least the seller refund me 33% of the amount.

Given that the value of each hash board is slightly less than 33% (You have a control board and a PSU) that's a decent deal, the seller was really more than decent to give you such a refund.

alfredwallace

newbie

Activity: 17

Merit: 0

Hi mikeywith, thanks for your answer.

That's what I guessed too, about no rest during 4 years.
You talk about phill but I don't know who he is ?

Yes now I will accept that this miner will mine with only 2 boards. I was afraid that it will consume power for the second hashboard but I guess no if he don't detect it. I can too unplug the second hashboard from power.

At least the seller refund me 33% of the amount.

Best regards.

AWZ

mikeywith

legendary

Activity: 2436

Merit: 6643

be constructive or S.T.F.U

Quote from: alfredwallace on March 09, 2021, 05:28:49 AM

I purchased 1 month ago 2 second hand S9. One work perfectly but on the second, the chain #7 is not displayed in the interface...

It's not displayed on the miner status because it's powred off by miner.

Quote from: alfredwallace on March 09, 2021, 05:28:49 AM

driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 0 asic

In plain English, this is a dead hashboard, the S9 you bought could be 4 years old and has not rested expected for the shipping duration to your address, it's perfectly normal for it to lose a board or two, and 90% of the time it starts with the middle board exactly like how your miner did, the middle board doesn't have the best air-flow due to the fan motor, that's why some people like phill use a spacer to allow more cooling.

You could try the basic PSU / ribbon cables switching but chances are, it's a dead hashboard just leave it there and mine with the other 2 boards.

alfredwallace

newbie

Activity: 17

Merit: 0

Hi miners, I open this post again cause I have it seem the same problem and want to know if the OP fixed his problem.

I purchased 1 month ago 2 second hand S9. One work perfectly but on the second, the chain #7 is not displayed in the interface: https://i.imgur.com/a5uuHfC.png.

And here is my kernel log:

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000294] ps7-ttc #0 at df804000, irq=43
[    0.000599] Console: colour dummy device 80x30
[    0.000628] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040197] pid_max: default: 32768 minimum: 301
[    0.040403] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040422] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042577] CPU: Testing write buffer coherency: ok
[    0.042885] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042942] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.043161] L310 cache controller enabled
[    0.043181] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.120988] CPU1: Booted secondary processor
[    0.210218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210346] Brought up 2 CPUs
[    0.210364] SMP: Total of 2 processors activated.
[    0.210372] CPU: All CPU(s) started in SVC mode.
[    0.211034] devtmpfs: initialized
[    0.213457] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214641] regulator-dummy: no parameters
[    0.221994] NET: Registered protocol family 16
[    0.224262] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226530] cpuidle: using governor ladder
[    0.226544] cpuidle: using governor menu
[    0.233885] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235396] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235410] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235519] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.257176] bio: create slab  at 0
[    0.258544] vgaarb: loaded
[    0.259251] SCSI subsystem initialized
[    0.260127] usbcore: registered new interface driver usbfs
[    0.260427] usbcore: registered new interface driver hub
[    0.260647] usbcore: registered new device driver usb
[    0.261182] media: Linux media interface: v0.10
[    0.261345] Linux video capture interface: v2.00
[    0.261582] pps_core: LinuxPPS API ver. 1 registered
[    0.261593] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.261713] PTP clock support registered
[    0.262072] EDAC MC: Ver: 3.0.0
[    0.263267] Advanced Linux Sound Architecture Driver Initialized.
[    0.265980] DMA-API: preallocated 4096 debug entries
[    0.265992] DMA-API: debugging enabled by kernel config
[    0.266063] Switched to clocksource arm_global_timer
[    0.287227] NET: Registered protocol family 2
[    0.287865] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.287922] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.288007] TCP: Hash tables configured (established 4096 bind 4096)
[    0.288052] TCP: reno registered
[    0.288068] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.288098] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.288332] NET: Registered protocol family 1
[    0.288665] RPC: Registered named UNIX socket transport module.
[    0.288677] RPC: Registered udp transport module.
[    0.288685] RPC: Registered tcp transport module.
[    0.288693] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288705] PCI: CLS 0 bytes, default 64
[    0.289122] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291112] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.293126] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293317] msgmni has been set to 967
[    0.294069] io scheduler noop registered
[    0.294082] io scheduler deadline registered
[    0.294122] io scheduler cfq registered (default)
[    0.306456] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.306476] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.428964] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.996027] console [ttyPS0] enabled
[    1.000273] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.007893] [drm] Initialized drm 1.1.0 20060810
[    1.024952] brd: module loaded
[    1.034334] loop: module loaded
[    1.043711] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.049690] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.057635] libphy: XEMACPS mii bus: probed
[    1.062007] ------------- phy_id = 0x3625e62
[    1.066868] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.075436] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.082088] ehci-pci: EHCI PCI platform driver
[    1.089359] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.096225] usbcore: registered new interface driver usb-storage
[    1.103061] mousedev: PS/2 mouse device common for all mice
[    1.109164] i2c /dev entries driver
[    1.116042] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.121559] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.127469] Xilinx Zynq CpuIdle Driver started
[    1.132311] sdhci: Secure Digital Host Controller Interface driver
[    1.138508] sdhci: Copyright(c) Pierre Ossman
[    1.142782] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.149601] mmc0: no vqmmc regulator found
[    1.153618] mmc0: no vmmc regulator found
[    1.196097] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.204808] usbcore: registered new interface driver usbhid
[    1.210316] usbhid: USB HID core driver
[    1.215015] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.221311] nand: Micron MT29F2G08ABAEAWP
[    1.225279] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.231228] Bad block table found at page 131008, version 0x01
[    1.237457] Bad block table found at page 130944, version 0x01
[    1.243506] 3 ofpart partitions found on MTD device pl353-nand
[    1.249285] Creating 3 MTD partitions on "pl353-nand":
[    1.254383] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.262436] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.269740] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.280456] TCP: cubic registered
[    1.283696] NET: Registered protocol family 17
[    1.288386] Registering SWP/SWPB emulation handler
[    1.294245] regulator-dummy: disabling
[    1.298558] UBI: attaching mtd1 to ubi0
[    1.827813] UBI: scanning is finished
[    1.839452] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.846532] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.853276] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.859979] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.866837] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.872806] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.879938] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1113221046
[    1.888968] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.898184] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.898189] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.902079] ALSA device list:
[    1.902082]   No soundcards found.
[    1.918492] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    1.947762] UBIFS: recovery needed
[    2.596420] UBIFS: recovery completed
[    2.600093] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.606015] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.615153] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.625034] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.630074] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E8A4479F-B15D-4C7A-964D-0F246E2BB6ED, small LPT model
[    2.641357] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.648569] devtmpfs: mounted
[    2.651690] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    3.500338] random: dd urandom read with 1 bits of entropy available
[    3.886090] 
[    3.886090] bcm54xx_config_init
[    4.956119] 
[    4.956119] bcm54xx_config_init
[    8.956934] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    8.963036] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   23.517088] In axi fpga driver!
[   23.520154] request_mem_region OK!
[   23.523543] AXI fpga dev virtual address is 0xdf9fe000
[   23.528684] *base_vir_addr = 0xc51e
[   23.543397] In fpga mem driver!
[   23.546747] request_mem_region OK!
[   23.550266] fpga mem virtual address is 0xe2000000
[   24.345419] 
[   24.345419] bcm54xx_config_init
[   25.445296] 
[   25.445296] bcm54xx_config_init
[   29.445685] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   29.451793] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[  433.030339] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507486208
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6f27000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5d20000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 813c0d21207b8854
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:9113: Chain[5] ASIC[4] has core num=1
main.c:9113: Chain[5] ASIC[29] has core num=6
main.c:9113: Chain[5] ASIC[35] has core num=4
main.c:9113: Chain[5] ASIC[37] has core num=1
main.c:9113: Chain[5] ASIC[39] has core num=2
main.c:9113: Chain[5] ASIC[44] has core num=1
main.c:9113: Chain[5] ASIC[46] has core num=15
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:9113: Chain[6] ASIC[0] has core num=1
main.c:9113: Chain[6] ASIC[1] has core num=1
main.c:9113: Chain[6] ASIC[2] has core num=2
main.c:9113: Chain[6] ASIC[3] has core num=1
main.c:9113: Chain[6] ASIC[5] has core num=1
main.c:9113: Chain[6] ASIC[6] has core num=2
main.c:9113: Chain[6] ASIC[7] has core num=1
main.c:9113: Chain[6] ASIC[8] has core num=1
main.c:9113: Chain[6] ASIC[9] has core num=1
main.c:9113: Chain[6] ASIC[10] has core num=1
main.c:9113: Chain[6] ASIC[11] has core num=2
main.c:9113: Chain[6] ASIC[12] has core num=1
main.c:9113: Chain[6] ASIC[13] has core num=2
main.c:9113: Chain[6] ASIC[14] has core num=7
main.c:9113: Chain[6] ASIC[15] has core num=1
main.c:9113: Chain[6] ASIC[16] has core num=1
main.c:9113: Chain[6] ASIC[17] has core num=1
main.c:9113: Chain[6] ASIC[18] has core num=1
main.c:9113: Chain[6] ASIC[19] has core num=1
main.c:9113: Chain[6] ASIC[20] has core num=1
main.c:9113: Chain[6] ASIC[21] has core num=1
main.c:9113: Chain[6] ASIC[22] has core num=1
main.c:9113: Chain[6] ASIC[23] has core num=1
main.c:9113: Chain[6] ASIC[24] has core num=1
main.c:9113: Chain[6] ASIC[25] has core num=1
main.c:9113: Chain[6] ASIC[26] has core num=1
main.c:9113: Chain[6] ASIC[27] has core num=1
main.c:9113: Chain[6] ASIC[28] has core num=1
main.c:9113: Chain[6] ASIC[29] has core num=1
main.c:9113: Chain[6] ASIC[30] has core num=1
main.c:9113: Chain[6] ASIC[31] has core num=1
main.c:9113: Chain[6] ASIC[32] has core num=1
main.c:9113: Chain[6] ASIC[33] has core num=1
main.c:9113: Chain[6] ASIC[34] has core num=1
main.c:9113: Chain[6] ASIC[35] has core num=2
main.c:9113: Chain[6] ASIC[36] has core num=1
main.c:9113: Chain[6] ASIC[37] has core num=1
main.c:9113: Chain[6] ASIC[38] has core num=2
main.c:9113: Chain[6] ASIC[39] has core num=1
main.c:9113: Chain[6] ASIC[40] has core num=1
main.c:9113: Chain[6] ASIC[41] has core num=1
main.c:9113: Chain[6] ASIC[42] has core num=1
main.c:9113: Chain[6] ASIC[43] has core num=1
main.c:9113: Chain[6] ASIC[45] has core num=1
main.c:9113: Chain[6] ASIC[46] has core num=1
main.c:9113: Chain[6] ASIC[47] has core num=1
main.c:9113: Chain[6] ASIC[48] has core num=1
main.c:9113: Chain[6] ASIC[49] has core num=1
main.c:9113: Chain[6] ASIC[50] has core num=1
main.c:9113: Chain[6] ASIC[51] has core num=1
main.c:9113: Chain[6] ASIC[52] has core num=1
main.c:9113: Chain[6] ASIC[53] has core num=1
main.c:9113: Chain[6] ASIC[54] has core num=2
main.c:9113: Chain[6] ASIC[55] has core num=1
main.c:9113: Chain[6] ASIC[56] has core num=2
main.c:9113: Chain[6] ASIC[57] has core num=1
main.c:9113: Chain[6] ASIC[58] has core num=1
main.c:9113: Chain[6] ASIC[59] has core num=1
main.c:9113: Chain[6] ASIC[60] has core num=1
main.c:9113: Chain[6] ASIC[61] has core num=1
main.c:9113: Chain[6] ASIC[62] has core num=1
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=91 on chain[5], value=890
main.c:9183: get PIC voltage=6 on chain[6], value=940
main.c:9183: get PIC voltage=57 on chain[7], value=910
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[6] temp chip I2C addr=0x98
main.c:9372: chain[6] has no middle temp, use special fix mode.
main.c:9349: chain[7] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:9372: chain[7] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 3
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649: 
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 3, total chain num = 3 
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found=24911 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12292:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:18:27 CST 2019 type: Antminer S9
driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 813c0d21207b8854
driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6120
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6120
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6120
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6120
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x49 0x00 0x49 0x04 0x49 0x09 0x49 0x00 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x01 0x49 0x01 0x49 0x0f 0x49 0x0f 0x49 0x0f 0x49 0x0f 0x49 0x05 0x49 0x09 0x49 0x23 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J6] has backup chain_voltage=890
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x48 0x00 0x48 0x04 0x48 0x08 0x48 0x00 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x01 0x48 0x01 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x05 0x48 0x09 0x48 0x23 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J7] has backup chain_voltage=890
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x43 0x00 0x43 0x04 0x43 0x03 0x43 0x00 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x01 0x43 0x01 0x43 0x0f 0x43 0x0f 0x43 0x0f 0x43 0x0f 0x43 0x05 0x43 0x0b 0x43 0x23 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J8] has backup chain_voltage=910
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 3
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=91 value=890
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=6 value=940
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J7] will use backup chain_voltage_pic=890 [91]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J7] get working chain_voltage_pic=91
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=57 value=910
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 63 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 63 asic
driver-btm-c5.c:4531:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[4] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[29] has core num=6
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[35] has core num=4
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[37] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[39] has core num=2
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[44] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[46] has core num=15
driver-btm-c5.c:4531:set_frequency: Chain[J8] has core num in PIC
driver-btm-c5.c:4571:set_frequency: miner total rate=8887GH/s ideal_total_hash_rate = 8500GH/s
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4598:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:5 base freq=643
Asic[ 0]:643 Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 
Asic[ 8]:643 Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 
Asic[16]:643 Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 
Asic[24]:643 Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 
Asic[32]:643 Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 
Asic[40]:643 Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 
Asic[48]:643 Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 
Asic[56]:643 Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643 
driver-btm-c5.c:4809:set_frequency: Chain:5 max freq=643
driver-btm-c5.c:4810:set_frequency: Chain:5 min freq=643

driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4598:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:7 base freq=606
Asic[ 0]:606 Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 
Asic[ 8]:606 Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 
Asic[16]:606 Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 
Asic[24]:606 Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 
Asic[32]:606 Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 
Asic[40]:606 Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 
Asic[48]:606 Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 
Asic[56]:606 Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606 
driver-btm-c5.c:4809:set_frequency: Chain:7 max freq=606
driver-btm-c5.c:4810:set_frequency: Chain:7 min freq=606


driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4855:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:5 base freq=643
Asic[ 0]:643 Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 
Asic[ 8]:643 Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 
Asic[16]:643 Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 
Asic[24]:643 Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 
Asic[32]:643 Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 
Asic[40]:643 Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 
Asic[48]:643 Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 
Asic[56]:643 Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643 
driver-btm-c5.c:5110:set_frequency: Chain:5 max freq=643
driver-btm-c5.c:5111:set_frequency: Chain:5 min freq=643

driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4855:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:7 base freq=606
Asic[ 0]:606 Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 
Asic[ 8]:606 Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 
Asic[16]:606 Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 
Asic[24]:606 Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 
Asic[32]:606 Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 
Asic[40]:606 Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 
Asic[48]:606 Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 
Asic[56]:606 Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606 
driver-btm-c5.c:5110:set_frequency: Chain:7 max freq=606
driver-btm-c5.c:5111:set_frequency: Chain:7 min freq=606

driver-btm-c5.c:5119:set_frequency: max freq = 643
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 8887, fixed_totalRate = 8500
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
driver-btm-c5.c:6635:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:29 remote:31 offset:28 
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=28 typeID=55
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[8] temp chip I2C addr=0x98
driver-btm-c5.c:6635:calibration_sensor_offset: chain[8] has no middle temp, use special fix mode.
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[8] chip[244] local:29 remote:31 offset:28 
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J8] chip[244] get middle temp offset=28 typeID=55
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=121568 total_tv_end_sys=121569
driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = 44
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:10487:check_system_work: voltage_check_done
driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 9168.652388, ideal hash rate = 8500
driver-btm-c5.c:10382:check_system_work: hash rate is ok now
driver-btm-c5.c:10200:check_avg_rate: avg_rate = 8856, ideal_total_hash_rate = 8500
driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10200:check_avg_rate: avg_rate = 8840, ideal_total_hash_rate = 8500
driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10200:check_avg_rate: avg_rate = 8822, ideal_total_hash_rate = 8500
driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10200:check_avg_rate: avg_rate = 8844, ideal_total_hash_rate = 8500
driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10200:check_avg_rate: avg_rate = 8880, ideal_total_hash_rate = 8500
driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10200:check_avg_rate: avg_rate = 8888, ideal_total_hash_rate = 8500
driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10200:check_avg_rate: avg_rate = 8874, ideal_total_hash_rate = 8500
driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=71.5210 Asic[02]=66.8230 Asic[03]=72.4100 Asic[04]=73.2820 Asic[05]=69.6420 Asic[06]=74.2890 Asic[07]=76.5870 Asic[08]=71.3360 
Asic[09]=80.0100 Asic[10]=73.6850 Asic[11]=69.6420 Asic[12]=72.2420 Asic[13]=74.9430 Asic[14]=70.2790 Asic[15]=69.5080 Asic[16]=70.5640 
Asic[17]=70.9500 Asic[18]=69.1220 Asic[19]=76.5870 Asic[20]=73.5170 Asic[21]=77.1410 Asic[22]=74.0710 Asic[23]=78.3320 Asic[24]=74.1040 
Asic[25]=74.5410 Asic[26]=69.9100 Asic[27]=71.5380 Asic[28]=78.3320 Asic[29]=69.5580 Asic[30]=71.4200 Asic[31]=74.6250 Asic[32]=67.6450 
Asic[33]=73.4500 Asic[34]=75.1780 Asic[35]=68.8530 Asic[36]=68.8870 Asic[37]=78.3830 Asic[38]=69.7760 Asic[39]=70.2460 Asic[40]=65.0780 
Asic[41]=72.8130 Asic[42]=69.8430 Asic[43]=72.9300 Asic[44]=75.6650 Asic[45]=73.6010 Asic[46]=69.6750 Asic[47]=68.5510 Asic[48]=68.8870 
Asic[49]=70.2290 Asic[50]=75.4300 Asic[51]=74.8260 Asic[52]=72.8290 Asic[53]=77.5270 Asic[54]=72.2760 Asic[55]=71.9230 Asic[56]=73.6010 
Asic[57]=80.4130 Asic[58]=76.9230 Asic[59]=71.6720 Asic[60]=75.4300 Asic[61]=74.4570 Asic[62]=69.1220 Asic[63]=73.3660 

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=67.3940 Asic[02]=69.0380 Asic[03]=69.6920 Asic[04]=71.9230 Asic[05]=66.4540 Asic[06]=70.3130 Asic[07]=69.1380 Asic[08]=65.8840 
Asic[09]=69.4740 Asic[10]=71.5210 Asic[11]=72.4940 Asic[12]=66.3870 Asic[13]=75.6310 Asic[14]=73.2490 Asic[15]=72.8290 Asic[16]=69.4400 
Asic[17]=68.0980 Asic[18]=69.3570 Asic[19]=69.4570 Asic[20]=71.8730 Asic[21]=63.1320 Asic[22]=66.2530 Asic[23]=65.9510 Asic[24]=66.5210 
Asic[25]=70.9840 Asic[26]=67.7630 Asic[27]=70.7150 Asic[28]=65.8330 Asic[29]=67.0920 Asic[30]=68.2660 Asic[31]=67.1250 Asic[32]=67.7460 
Asic[33]=69.7420 Asic[34]=65.5980 Asic[35]=69.7090 Asic[36]=68.7690 Asic[37]=65.8670 Asic[38]=66.5880 Asic[39]=69.8600 Asic[40]=73.6510 
Asic[41]=68.9710 Asic[42]=74.9100 Asic[43]=67.5610 Asic[44]=67.4610 Asic[45]=70.4130 Asic[46]=65.8000 Asic[47]=67.7630 Asic[48]=68.7020 
Asic[49]=72.1580 Asic[50]=72.0910 Asic[51]=68.4670 Asic[52]=68.3830 Asic[53]=74.0040 Asic[54]=67.2590 Asic[55]=67.6790 Asic[56]=66.1020 
Asic[57]=72.2760 Asic[58]=68.4840 Asic[59]=64.6590 Asic[60]=69.5410 Asic[61]=67.8800 Asic[62]=65.5820 Asic[63]=69.3730 
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=62
Chain[5] Chip[62] junction temperature=72
Special fix Chain[5] Chip[62] middle Temp = 77
Done read temp on Chain[5]
Chain[7] Chip[244] pcb temperature=61
Chain[7] Chip[62] junction temperature=72
Special fix Chain[7] Chip[62] middle Temp = 76
Done read temp on Chain[7]
Max pcb temp : 62
set FAN speed according to: temp_highest=62 temp_top1[PWM_T]=62 temp_top1[TEMP_POS_LOCAL]=62 temp_change=1 fix_fan_steps=0
FAN PWM: 72
read_temp_func Done!
CRC error counter=0

I contacted the seller and he tell me that before sending to me the S9 was tested and it worked very good without that problem.

I search then a solution on Internet, I already flashed multiple time the firmware, I changed the power cable position, I inversed the cable to the motherboard, I inversed the PSU with my other S9 who work good, I moved the miner into another piece.

What is strange for me is the Kernel say there is 0 asics on chain[7]:

Code:

driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 63 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 63 asic

But if you look just before the end he set frequency for every asic in Chain[J7].

I'm not very good with electronic and electricity to open this miner and don't want to make it worst as he at least mine at 9TH/s. Somebody can help me by any sort ?

Sorry for my english, I'm from french part of switzerland. Thanks for any help!

AW.

Artemis3

legendary

Activity: 2030

Merit: 1573

CLEAN non GPL infringing code made in Rust lang

Quote from: BitMaxz on September 19, 2019, 06:36:32 PM

If your power source is 110v the miner will run abnormally because Antminer s9 is made to run at 240v, not in 110v.

The PSU APW2 never heard this PSU before are you talking about APW3 or APW3?

Can you try to "Test hash board one by one"

If the hashboard running fine in the single hash board it means that the PSU is not giving enough power.
Solution: you need to buy a step-up transformer to be able to run them at full speed.

Correction, their miners are made to run at 230v @50Hz, this is what they will test their PSUs first and foremost, because, that's the mains in China. The other voltages are more or less lab test conditions. Of course most of those PSUs work happily with a bit less (such as 208v from two 120v phases) or 240v as you get in America for dryer/AC circuits at home or such.

But this also means, slight deviations will get into the danger zone faster, such as going 250v peak that in China would have been a 240v peak...

OP should indeed test each single board separately, and swap data and power cables, the usual procedure. And remember to test them for an hour or so hashing.

And yes, S9s are not meant to run at 110v... maybe if you stick to use two boards only (remove the middle one), like the R4 used to.

Quote from: mikeywith on September 21, 2019, 11:06:41 PM

Not really true, Antminer S9 is made to run on 12.xx volt DC , how you power up the power supply does not matter, it can be 110v ac , 220v or even a hamster wheel for that matter.

The issue here is that apw3 can only deliver 1200w when on 110v so he needs to run the miner on lower settings.

However the psu he uses is lianli 2500w which iirc correctly does give a total of 1800w on a 110v circuit which should be enough, more than enough to run an S9 even on old non-asicboost firmware.

However according to the kernel log, hashboard 6 is causing the miner to be unstable, so to answer the question in OP , yes it is perfectly fine to unplug one of the hashboard ( the once you call chip in op, it is hashboard not a chip).

Simply unplug the 3 6pin cables , you don't even need to remover the data cable, then post your results.

This is theoretically not allowed by most electric codes, no "110v" circuit (actually 120, some places 115) should go above 1500w ever. You are over stressing the circuit and the PSU. But of course technically the input the hashboards want is 12v and some hundred amps (i forgot).

Perhaps using two PSUs from different phases would be better, but then again if you can do that you can also do the 208v "magic" trick...

mikeywith

legendary

Activity: 2436

Merit: 6643

be constructive or S.T.F.U

Quote from: philipma1957 on September 22, 2019, 09:07:47 AM

To be able to run part of that bad board is not possible with the firmware you have.

I think to be more accurate, it's not really the firmware which forbids him from running a hash board with missing chips, it's rather the direction of the signals between those chips.

The diagram above is way above my understanding, I don't claim to understand how the different signals travel within the board, but what I am sure of is that depending on the chip that burns, you might still be able to run that chip with less than 63 chips, I had some hash boards run fine with some defected chips, while many boards become useless the moment they lose a single chip, which makes me think that it's not really the firmware but rather the signal flow.

I hope someone with better understating about electronics can chime in.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

To clarify.

You can run two boards. And do 9th.

And most likely your third board is dead just detach it.

To be able to run part of that bad board is not possible with the firmware you have.

mikeywith

legendary

Activity: 2436

Merit: 6643

be constructive or S.T.F.U

Quote from: BitMaxz on September 19, 2019, 06:36:32 PM

If your power source is 110v the miner will run abnormally because Antminer s9 is made to run at 240v, not in 110v.

gearshiftjb

jr. member

Activity: 45

Merit: 1

Quote from: BitMaxz on September 19, 2019, 06:36:32 PM

Thank you good sir, I will have to look into a step-up, perhaps.

I did mean APW3 for sure lol.

I can't seem to have any of the 3 cards remain stable and mining for very long. Eventually they start to restart and go back down to 0GH, where it seems to idle until it wants to mine again, and repeat the cycle.
I am not sure what is going on anymore but I have some time today and tomorrow to try.

BitMaxz

legendary

Activity: 3472

Merit: 3217

Playbet.io - Crypto Casino and Sportsbook

gearshiftjb

jr. member

Activity: 45

Merit: 1

Good evening BtcTalk people. I hope you're all having a good week.
First off, I am a noob at mining. This is my first rig, an Antminer S9. Xilinx Board.
My PSU is 2500w Lianli PSU. I had a bitmain APW2 but I'm running on 110v so I didn't think it would be good enough.
I believe I am having issues. I have yet to hit the full 13.5TH that I am supposed to, and I believe one of the boards are iffy.
Worth noting, I am on the newest July 31st FW, non multi window active.

- Here is a recent Kernel Log.

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000299] ps7-ttc #0 at df804000, irq=43
[    0.000605] Console: colour dummy device 80x30
[    0.000634] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.100246] pid_max: default: 32768 minimum: 301
[    0.100458] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100476] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102661] CPU: Testing write buffer coherency: ok
[    0.102981] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.103038] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.103260] L310 cache controller enabled
[    0.103279] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.180992] CPU1: Booted secondary processor
[    0.270223] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.270351] Brought up 2 CPUs
[    0.270370] SMP: Total of 2 processors activated.
[    0.270378] CPU: All CPU(s) started in SVC mode.
[    0.271037] devtmpfs: initialized
[    0.273462] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.274669] regulator-dummy: no parameters
[    0.282078] NET: Registered protocol family 16
[    0.284360] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.286628] cpuidle: using governor ladder
[    0.286641] cpuidle: using governor menu
[    0.294018] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.295536] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.295549] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.295659] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.317484] bio: create slab  at 0
[    0.318888] vgaarb: loaded
[    0.319577] SCSI subsystem initialized
[    0.320830] usbcore: registered new interface driver usbfs
[    0.321004] usbcore: registered new interface driver hub
[    0.321682] usbcore: registered new device driver usb
[    0.322206] media: Linux media interface: v0.10
[    0.322371] Linux video capture interface: v2.00
[    0.322621] pps_core: LinuxPPS API ver. 1 registered
[    0.322632] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.322756] PTP clock support registered
[    0.323110] EDAC MC: Ver: 3.0.0
[    0.324305] Advanced Linux Sound Architecture Driver Initialized.
[    0.327026] DMA-API: preallocated 4096 debug entries
[    0.327041] DMA-API: debugging enabled by kernel config
[    0.327112] Switched to clocksource arm_global_timer
[    0.347396] NET: Registered protocol family 2
[    0.348113] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.348170] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.348255] TCP: Hash tables configured (established 4096 bind 4096)
[    0.348302] TCP: reno registered
[    0.348319] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.348350] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.348590] NET: Registered protocol family 1
[    0.348944] RPC: Registered named UNIX socket transport module.
[    0.348956] RPC: Registered udp transport module.
[    0.348964] RPC: Registered tcp transport module.
[    0.348972] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.348985] PCI: CLS 0 bytes, default 64
[    0.349421] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.351413] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.353479] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.353670] msgmni has been set to 967
[    0.354432] io scheduler noop registered
[    0.354445] io scheduler deadline registered
[    0.354487] io scheduler cfq registered (default)
[    0.366483] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.366503] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.490717] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.057947] console [ttyPS0] enabled
[    1.062204] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.069826] [drm] Initialized drm 1.1.0 20060810
[    1.086798] brd: module loaded
[    1.096196] loop: module loaded
[    1.105602] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.111580] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.119447] libphy: XEMACPS mii bus: probed
[    1.123813] ------------- phy_id = 0x3625e62
[    1.128753] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.137460] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.144080] ehci-pci: EHCI PCI platform driver
[    1.151331] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.158157] usbcore: registered new interface driver usb-storage
[    1.164985] mousedev: PS/2 mouse device common for all mice
[    1.171102] i2c /dev entries driver
[    1.178019] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.183498] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.189416] Xilinx Zynq CpuIdle Driver started
[    1.194261] sdhci: Secure Digital Host Controller Interface driver
[    1.200490] sdhci: Copyright(c) Pierre Ossman
[    1.204762] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.211581] mmc0: no vqmmc regulator found
[    1.215597] mmc0: no vmmc regulator found
[    1.257156] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.265845] usbcore: registered new interface driver usbhid
[    1.271348] usbhid: USB HID core driver
[    1.276052] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.282354] nand: Micron MT29F2G08ABAEAWP
[    1.286313] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.292248] Bad block table found at page 131008, version 0x01
[    1.298473] Bad block table found at page 130944, version 0x01
[    1.304522] 3 ofpart partitions found on MTD device pl353-nand
[    1.310304] Creating 3 MTD partitions on "pl353-nand":
[    1.315399] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.323460] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.330773] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.341535] TCP: cubic registered
[    1.344773] NET: Registered protocol family 17
[    1.349476] Registering SWP/SWPB emulation handler
[    1.355344] regulator-dummy: disabling
[    1.359692] UBI: attaching mtd1 to ubi0
[    1.884924] UBI: scanning is finished
[    1.896560] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.903644] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.910406] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.917070] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.923948] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.929929] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.937036] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1113221046
[    1.946079] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.955295] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.955300] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.959312] ALSA device list:
[    1.959317]   No soundcards found.
[    1.975619] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    2.004686] UBIFS: recovery needed
[    2.111489] UBIFS: recovery completed
[    2.115166] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.121116] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.130222] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.140111] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.145141] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E8A4479F-B15D-4C7A-964D-0F246E2BB6ED, small LPT model
[    2.156434] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.163849] devtmpfs: mounted
[    2.166952] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    3.001923] random: dd urandom read with 1 bits of entropy available
[    3.387139] 
[    3.387139] bcm54xx_config_init
[    4.457132] 
[    4.457132] bcm54xx_config_init
[    8.457973] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    8.464074] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   23.039898] In axi fpga driver!
[   23.042968] request_mem_region OK!
[   23.046358] AXI fpga dev virtual address is 0xdf9fe000
[   23.051492] *base_vir_addr = 0xc51e
[   23.066025] In fpga mem driver!
[   23.069401] request_mem_region OK!
[   23.072902] fpga mem virtual address is 0xe2000000
[   23.857129] 
[   23.857129] bcm54xx_config_init
[   24.947160] 
[   24.947160] bcm54xx_config_init
[   28.947982] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   28.954085] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[  558.658363] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507486208
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6fa8000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5da1000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 8144e52169008814
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:9113: Chain[5] ASIC[11] has core num=1
main.c:9113: Chain[5] ASIC[15] has core num=15
main.c:9113: Chain[5] ASIC[29] has core num=7
main.c:9113: Chain[5] ASIC[38] has core num=2
main.c:9113: Chain[5] ASIC[43] has core num=15
main.c:9113: Chain[5] ASIC[56] has core num=1
main.c:9113: Chain[5] ASIC[61] has core num=1
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:9113: Chain[6] ASIC[9] has core num=1
main.c:9113: Chain[6] ASIC[10] has core num=5
main.c:9113: Chain[6] ASIC[12] has core num=2
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:9113: Chain[7] ASIC[29] has core num=5
main.c:9113: Chain[7] ASIC[43] has core num=2
main.c:9113: Chain[7] ASIC[44] has core num=3
main.c:9113: Chain[7] ASIC[48] has core num=1
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=91 on chain[5], value=890
main.c:9183: get PIC voltage=91 on chain[6], value=890
main.c:9183: get PIC voltage=6 on chain[7], value=940
main.c:9349: chain[5] temp offset record: 62,-5,0,0,0,0,34,0
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9349: chain[6] temp offset record: 62,1,0,0,0,0,34,0
main.c:9366: chain[6] temp chip I2C addr=0x98
main.c:9349: chain[7] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:9372: chain[7] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 3
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649: 
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 3, total chain num = 3 
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 2209 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
main.c:13927: bmminer not found=27727 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12292:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:18:27 CST 2019 type: Antminer S9
driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 8144e52169008814
driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5160
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5160
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=4800
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5160
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=4800
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5160
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=4800
driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x0f 0x4a 0x0b 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x09 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J6] has backup chain_voltage=890
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x47 0x01 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J7] has backup chain_voltage=890
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x43 0x00 0x43 0x04 0x43 0x03 0x43 0x00 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x01 0x43 0x01 0x43 0x0f 0x43 0x0f 0x43 0x0f 0x43 0x0f 0x43 0x05 0x43 0x0b 0x43 0x23 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J8] has backup chain_voltage=910
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 3
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=23 value=930
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J6] will use backup chain_voltage_pic=890 [91]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J6] get working chain_voltage_pic=91
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=6 value=940
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J7] will use backup chain_voltage_pic=890 [91]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J7] get working chain_voltage_pic=91
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=6 value=940
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J8] will use backup chain_voltage_pic=910 [57]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J8] get working chain_voltage_pic=57
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 63 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 62 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 63 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 61 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 61 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 61 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 61 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 61 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 61 asic
driver-btm-c5.c:4531:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[11] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[15] has core num=15
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[29] has core num=7
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[38] has core num=2
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[43] has core num=15
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[56] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[61] has core num=1
driver-btm-c5.c:4531:set_frequency: Chain[J7] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[9] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[10] has core num=5
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[12] has core num=2
driver-btm-c5.c:4531:set_frequency: Chain[J8] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[29] has core num=5
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[43] has core num=2
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[44] has core num=3
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[48] has core num=1
driver-btm-c5.c:4571:set_frequency: miner total rate=13384GH/s ideal_total_hash_rate = 13000GH/s
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4598:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:5 temp offset=-5
driver-btm-c5.c:4773:set_frequency: Chain:5 base freq=650
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650 
driver-btm-c5.c:4809:set_frequency: Chain:5 max freq=650
driver-btm-c5.c:4810:set_frequency: Chain:5 min freq=650

driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[6]
driver-btm-c5.c:4598:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:6 temp offset=1
driver-btm-c5.c:4773:set_frequency: Chain:6 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631 
driver-btm-c5.c:4809:set_frequency: Chain:6 max freq=631
driver-btm-c5.c:4810:set_frequency: Chain:6 min freq=631

driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4598:set_frequency: Chain:7 chipnum=61
driver-btm-c5.c:4618:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:7 base freq=606
Asic[ 0]:606 Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 
Asic[ 8]:606 Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 
Asic[16]:606 Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 
Asic[24]:606 Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 
Asic[32]:606 Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 
Asic[40]:606 Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 
Asic[48]:606 Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 
Asic[56]:606 Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 
driver-btm-c5.c:4809:set_frequency: Chain:7 max freq=606
driver-btm-c5.c:4810:set_frequency: Chain:7 min freq=606


driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:4263:ProcessFixFreqForChips: totalRate = 13384, fixed_totalRate = 13130
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4855:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:5 temp offset=-5
driver-btm-c5.c:5063:set_frequency: Chain:5 base freq=650
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650 
driver-btm-c5.c:5110:set_frequency: Chain:5 max freq=650
driver-btm-c5.c:5111:set_frequency: Chain:5 min freq=650

driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[6]
driver-btm-c5.c:4855:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:6 temp offset=1
driver-btm-c5.c:5063:set_frequency: Chain:6 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631 
driver-btm-c5.c:5110:set_frequency: Chain:6 max freq=631
driver-btm-c5.c:5111:set_frequency: Chain:6 min freq=631

driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4855:set_frequency: Chain:7 chipnum=61
driver-btm-c5.c:4874:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:7 base freq=606
Asic[ 0]:606 Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 
Asic[ 8]:606 Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 
Asic[16]:606 Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 
Asic[24]:606 Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 
Asic[32]:606 Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 
Asic[40]:606 Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 
Asic[48]:606 Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 
Asic[56]:606 Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 
driver-btm-c5.c:5110:set_frequency: Chain:7 max freq=606
driver-btm-c5.c:5111:set_frequency: Chain:7 min freq=606

driver-btm-c5.c:5119:set_frequency: max freq = 650
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 13384, fixed_totalRate = 13000
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,-5,0,0,0,0,34,0,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=-5 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:24 remote:26 offset:28 
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=28 typeID=55
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J7] PIC temp offset: 62,1,0,0,0,0,34,0,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[7] temp chip I2C addr=0x98
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J7] chip[244] use PIC middle temp offset=1 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[7] chip[244] local:24 remote:28 offset:26 
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J7] chip[244] get middle temp offset=26 typeID=55
driver-btm-c5.c:13651:bitmain_c5_init: single board rate=4512 voltage limit=890 on chain[5]
driver-btm-c5.c:13688:bitmain_c5_init: get PIC voltage=890 on chain[5], check: must be < 890
driver-btm-c5.c:13651:bitmain_c5_init: single board rate=4526 voltage limit=890 on chain[6]
driver-btm-c5.c:13688:bitmain_c5_init: get PIC voltage=890 on chain[6], check: must be < 890
driver-btm-c5.c:13651:bitmain_c5_init: single board rate=4345 voltage limit=910 on chain[7]
driver-btm-c5.c:13688:bitmain_c5_init: get PIC voltage=910 on chain[7], check: must be < 910
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 890
driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=941 total_tv_end_sys=942
driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = 37
driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 7178.627438, ideal hash rate = 13000
driver-btm-c5.c:10387:check_system_work: hash rate is low...
driver-btm-c5.c:10363:check_system_work: re_open_core_times: 1
driver-btm-c5.c:15630:re_open_core: re_open_core enter
driver-btm-c5.c:15791:re_open_core: Chain[J6] has 63 asic
driver-btm-c5.c:15791:re_open_core: Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 0, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 1, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 2, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 3, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 4, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 5, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 6, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 7, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 8, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 9, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 10, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 11, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 63 asic
driver-btm-c5.c:15791:re_open_core: Chain[J8] has 9 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 0, dev->chain_asic_num[i] = 9
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 62 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 1, dev->chain_asic_num[i] = 62
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 60 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 2, dev->chain_asic_num[i] = 60
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 62 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 3, dev->chain_asic_num[i] = 62
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 60 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 4, dev->chain_asic_num[i] = 60
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 60 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 5, dev->chain_asic_num[i] = 60
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 60 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 6, dev->chain_asic_num[i] = 60
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 61 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 7, dev->chain_asic_num[i] = 61
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 61 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 8, dev->chain_asic_num[i] = 61
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 61 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 9, dev->chain_asic_num[i] = 61
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 61 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 10, dev->chain_asic_num[i] = 61
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 61 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 11, dev->chain_asic_num[i] = 61
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 61 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 12, dev->chain_asic_num[i] = 61
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 61 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 13, dev->chain_asic_num[i] = 61
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 61 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 14, dev->chain_asic_num[i] = 61
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 60 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 15, dev->chain_asic_num[i] = 60
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 60 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 16, dev->chain_asic_num[i] = 60
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 60 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 17, dev->chain_asic_num[i] = 60
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 60 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 18, dev->chain_asic_num[i] = 60
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 60 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 19, dev->chain_asic_num[i] = 60
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 60 asic
driver-btm-c5.c:4531:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[11] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[15] has core num=15
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[29] has core num=7
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[38] has core num=2
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[43] has core num=15
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[56] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[61] has core num=1
driver-btm-c5.c:4531:set_frequency: Chain[J7] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[9] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[10] has core num=5
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[12] has core num=2
driver-btm-c5.c:4531:set_frequency: Chain[J8] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[29] has core num=5
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[43] has core num=2
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[44] has core num=3
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[48] has core num=1
driver-btm-c5.c:4571:set_frequency: miner total rate=13384GH/s ideal_total_hash_rate = 13000GH/s
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4598:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:5 temp offset=-5
driver-btm-c5.c:4773:set_frequency: Chain:5 base freq=650
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650 
driver-btm-c5.c:4809:set_frequency: Chain:5 max freq=650
driver-btm-c5.c:4810:set_frequency: Chain:5 min freq=650

driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[6]
driver-btm-c5.c:4598:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:6 temp offset=1
driver-btm-c5.c:4773:set_frequency: Chain:6 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631 
driver-btm-c5.c:4809:set_frequency: Chain:6 max freq=631
driver-btm-c5.c:4810:set_frequency: Chain:6 min freq=631

driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4598:set_frequency: Chain:7 chipnum=60
driver-btm-c5.c:4618:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:7 base freq=606
Asic[ 0]:606 Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 
Asic[ 8]:606 Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 
Asic[16]:606 Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 
Asic[24]:606 Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 
Asic[32]:606 Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 
Asic[40]:606 Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 
Asic[48]:606 Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 
Asic[56]:606 Asic[57]:606 Asic[58]:606 Asic[59]:606 
driver-btm-c5.c:4809:set_frequency: Chain:7 max freq=606
driver-btm-c5.c:4810:set_frequency: Chain:7 min freq=606


driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:4263:ProcessFixFreqForChips: totalRate = 13384, fixed_totalRate = 13130
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4855:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:5 temp offset=-5
driver-btm-c5.c:5063:set_frequency: Chain:5 base freq=650
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650 
driver-btm-c5.c:5110:set_frequency: Chain:5 max freq=650
driver-btm-c5.c:5111:set_frequency: Chain:5 min freq=650

driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[6]
driver-btm-c5.c:4855:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:6 temp offset=1
driver-btm-c5.c:5063:set_frequency: Chain:6 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631 
driver-btm-c5.c:5110:set_frequency: Chain:6 max freq=631
driver-btm-c5.c:5111:set_frequency: Chain:6 min freq=631

driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4855:set_frequency: Chain:7 chipnum=60
driver-btm-c5.c:4874:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:7 base freq=606
Asic[ 0]:606 Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 
Asic[ 8]:606 Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 
Asic[16]:606 Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 
Asic[24]:606 Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 
Asic[32]:606 Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 
Asic[40]:606 Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 
Asic[48]:606 Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 
Asic[56]:606 Asic[57]:606 Asic[58]:606 Asic[59]:606 
driver-btm-c5.c:5110:set_frequency: Chain:7 max freq=606
driver-btm-c5.c:5111:set_frequency: Chain:7 min freq=606

driver-btm-c5.c:5119:set_frequency: max freq = 650
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 13384, fixed_totalRate = 13000
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,-5,0,0,0,0,34,0,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=-5 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:25 remote:28 offset:27 
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=27 typeID=55
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J7] PIC temp offset: 62,1,0,0,0,0,34,0,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[7] temp chip I2C addr=0x98
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J7] chip[244] use PIC middle temp offset=1 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[7] chip[244] local:26 remote:29 offset:27 
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J7] chip[244] get middle temp offset=27 typeID=55
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 890
driver-btm-c5.c:16082:re_open_core: reopen core end
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=78.9530 Asic[02]=72.3090 Asic[03]=72.0410 Asic[04]=71.9400 Asic[05]=74.2220 Asic[06]=71.0850 Asic[07]=72.2090 Asic[08]=75.1280 
Asic[09]=79.9600 Asic[10]=79.4900 Asic[11]=77.4600 Asic[12]=74.5240 Asic[13]=70.9840 Asic[14]=71.4370 Asic[15]=69.8930 Asic[16]=75.0780 
Asic[17]=70.9500 Asic[18]=72.3260 Asic[19]=76.1350 Asic[20]=76.2020 Asic[21]=71.1680 Asic[22]=78.8190 Asic[23]=74.1720 Asic[24]=69.0710 
Asic[25]=76.9900 Asic[26]=76.4700 Asic[27]=74.6250 Asic[28]=73.7520 Asic[29]=77.1910 Asic[30]=1.19100 Asic[31]=80.9330 Asic[32]=72.7460 
Asic[33]=77.5100 Asic[34]=70.9170 Asic[35]=71.5040 Asic[36]=3.55600 Asic[37]=72.3090 Asic[38]=69.0380 Asic[39]=57.3440 Asic[40]=74.5740 
Asic[41]=75.0780 Asic[42]=74.7250 Asic[43]=68.6850 Asic[44]=72.2930 Asic[45]=74.3730 Asic[46]=68.9870 Asic[47]=69.2220 Asic[48]=74.5740 
Asic[49]=76.0340 Asic[50]=79.0540 Asic[51]=71.0010 Asic[52]=76.4870 Asic[53]=70.4810 Asic[54]=70.9170 Asic[55]=76.7050 Asic[56]=72.0740 
Asic[57]=71.8900 Asic[58]=71.8560 Asic[59]=74.6750 Asic[60]=68.4670 Asic[61]=76.9230 Asic[62]=68.9040 Asic[63]=75.9670 

get RT hashrate from Chain[6]: (asic index start from 1-63)

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=69.9100 Asic[02]=66.7560 Asic[03]=66.3530 Asic[04]=75.0100 Asic[05]=71.9070 Asic[06]=68.3160 Asic[07]=29.1580 Asic[08]=66.1350 
Asic[09]=66.3370 Asic[10]=69.6250 Asic[11]=70.4130 Asic[12]=52.4120 Asic[13]=67.2430 Asic[14]=65.1620 Asic[15]=70.9340 Asic[16]=34.8960 
Asic[17]=71.3360 Asic[18]=34.7280 Asic[19]=66.7730 Asic[20]=40.1640 Asic[21]=62.1930 Asic[22]=37.3620 Asic[23]=67.6960 Asic[24]=70.4640 
Asic[25]=66.4710 Asic[26]=70.0440 Asic[27]=70.2290 Asic[28]=37.4290 Asic[29]=37.7990 Asic[30]=44.7440 Asic[31]=50.0790 Asic[32]=65.5480 
Asic[33]=71.9400 Asic[34]=58.5020 Asic[35]=54.7770 Asic[36]=69.8600 Asic[37]=72.3600 Asic[38]=71.6380 Asic[39]=39.5770 Asic[40]=68.3160 
Asic[41]=45.7340 Asic[42]=47.1770 Asic[43]=35.3160 Asic[44]=67.5780 Asic[45]=70.6150 Asic[46]=36.1380 Asic[47]=65.9510 Asic[48]=70.4810 
Asic[49]=64.9440 Asic[50]=67.6790 Asic[51]=67.7960 Asic[52]=73.1650 Asic[53]=66.5710 Asic[54]=2.85200 Asic[55]=33.7720 Asic[56]=45.9690 
Asic[57]=67.5280 Asic[58]=70.3130 Asic[59]=71.5040 Asic[60]=38.0840 Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Asic[29]=375.088000
Asic[57]=353.898000
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[62]=36028797.002000
Asic[63]=1934040.953000
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=47
Chain[5] Chip[62] junction temperature=62
Done read temp on Chain[5]
read failed on Chain[6] Chip[62] middle Temp old value:50
Done read temp on Chain[6]
Done read temp on Chain[7]
Max pcb temp : 47
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=24648

From what I can tell, Chain 6 isn't reporting any asic chips? Here is a status page screenshot.

https://imgur.com/a/9RRFIAM

Somethings I've noticed - the miner sounds like its running fine after boot up, then will restart every 5-10minutes.
upon restart different things can happen. One chip seems okay, one will come and go with various amounts of asic (1-63) available, and one will show 63 asic available 0 hash. It's almost like I'm mining 1/3rd of my capability.

Is it okay to remove two of the chips and just run one fulltime in the event that I cannot fix the other two? I'm at my minds end. Please help if possible!

I am sorry if I don't reply right away, I get like 2 hours a day to do my hobbies/chores because I work so much during the week. I will check in when I can. Thank you.

Edit - if you need anything else from me, please just ask.