THNX BITMAXZZZZZZ
i changed the power cords, in different setup and worked fine all 3 hashboards are working now
Topic: Antminer S9 working with 2 H-boards (Read 204 times)
i have used the latest posted on bitmain support "Antminer-S9-all-201711171757-autofreq-user-Update2UBI-NF.tar.gz"
the antminer came with july bacth firmware which is older version and still did not work on it.
i will try to change power cords but afraid that keep powering it on and off will burn it.
as well i guess my power is good as i use smart-ups that stabilize the power input to 220v and have 2000 kw capacity.
the antminer came with july bacth firmware which is older version and still did not work on it.
i will try to change power cords but afraid that keep powering it on and off will burn it.
as well i guess my power is good as i use smart-ups that stabilize the power input to 220v and have 2000 kw capacity.
i have bought new antminer S9 and i received it few days ago and seems its july batch and when plugged it into the bitmain apw3++ that came with it,it shows empty hardware version and bmminer version.
thus i tried updating the firm to november latest version and still same issue.
i tried everything and finally, i decided to disconnect 1 board,picked randomly and then the machine worked fine miniging with 2 hashboards.
when i plugged the 3rd ,the machine stopped mining and felt like it kept rebooting every 5 minutes,as if the bbminer not found or could not boot.
remove the 3rd hashboard and antminer worked again fine with 2 boards.
any idea was is wrong ?
i am sure it isnt board mulfunction and any board i disconnect it boost with the other 2.
and i have smart-ups connected to the apw3++ with 220v stable output
thanks for the help in advance
Did you tried to test the hashing board you removed if its working in other connection i mean remove the 2nd and put the 3rd hashing board and try it if it is work it means the hashing board is working also try the cords in other working hashing board if its working it means your cords from your miner is working.. thus i tried updating the firm to november latest version and still same issue.
i tried everything and finally, i decided to disconnect 1 board,picked randomly and then the machine worked fine miniging with 2 hashboards.
when i plugged the 3rd ,the machine stopped mining and felt like it kept rebooting every 5 minutes,as if the bbminer not found or could not boot.
remove the 3rd hashboard and antminer worked again fine with 2 boards.
any idea was is wrong ?
i am sure it isnt board mulfunction and any board i disconnect it boost with the other 2.
and i have smart-ups connected to the apw3++ with 220v stable output
thanks for the help in advance
My guess is your PSU its not giving enough power.. could you try to change or use a new one and test your antminer again..
Let me ask if what firmware did you use when updating is it the auto frequency firmware?
Check the other firmware here https://shop.bitmain.com/support.htm?pid=00720161126080548570Q2tDBXAH065D
There are some other miner having the same issue but they are just down grading the firmware and work fine..
i have bought new antminer S9 and i received it few days ago and seems its july batch and when plugged it into the bitmain apw3++ that came with it,it shows empty hardware version and bmminer version.
thus i tried updating the firm to november latest version and still same issue.
i tried everything and finally, i decided to disconnect 1 board,picked randomly and then the machine worked fine miniging with 2 hashboards.
when i plugged the 3rd ,the machine stopped mining and felt like it kept rebooting every 5 minutes,as if the bbminer not found or could not boot.
remove the 3rd hashboard and antminer worked again fine with 2 boards.
any idea was is wrong ?
i am sure it isnt board mulfunction and any board i disconnect it boost with the other 2.
and i have smart-ups connected to the apw3++ with 220v stable output
thanks for the help in advance
thus i tried updating the firm to november latest version and still same issue.
i tried everything and finally, i decided to disconnect 1 board,picked randomly and then the machine worked fine miniging with 2 hashboards.
when i plugged the 3rd ,the machine stopped mining and felt like it kept rebooting every 5 minutes,as if the bbminer not found or could not boot.
remove the 3rd hashboard and antminer worked again fine with 2 boards.
any idea was is wrong ?
i am sure it isnt board mulfunction and any board i disconnect it boost with the other 2.
and i have smart-ups connected to the apw3++ with 220v stable output
thanks for the help in advance
Jump to: