Topic: antminer s9j new, rebooting (Read 195 times)

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000016] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000317] ps7-ttc #0 at df804000, irq=43
[    0.000629] Console: colour dummy device 80x30
[    0.000661] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040212] pid_max: default: 32768 minimum: 301
[    0.040436] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040455] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042615] CPU: Testing write buffer coherency: ok
[    0.042964] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043026] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[    0.043250] L310 cache controller enabled
[    0.043269] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121042] CPU1: Booted secondary processor
[    0.210231] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210364] Brought up 2 CPUs
[    0.210383] SMP: Total of 2 processors activated.
[    0.210391] CPU: All CPU(s) started in SVC mode.
[    0.211092] devtmpfs: initialized
[    0.213505] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214761] regulator-dummy: no parameters
[    0.223337] NET: Registered protocol family 16
[    0.225544] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.227871] cpuidle: using governor ladder
[    0.227886] cpuidle: using governor menu
[    0.235404] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.236927] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.236940] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.237064] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.259279] bio: create slab  at 0
[    0.260923] vgaarb: loaded
[    0.261644] SCSI subsystem initialized
[    0.262539] usbcore: registered new interface driver usbfs
[    0.262717] usbcore: registered new interface driver hub
[    0.262953] usbcore: registered new device driver usb
[    0.263483] media: Linux media interface: v0.10
[    0.263640] Linux video capture interface: v2.00
[    0.263885] pps_core: LinuxPPS API ver. 1 registered
[    0.263897] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.264022] PTP clock support registered
[    0.264402] EDAC MC: Ver: 3.0.0
[    0.265480] Advanced Linux Sound Architecture Driver Initialized.
[    0.268481] DMA-API: preallocated 4096 debug entries
[    0.268495] DMA-API: debugging enabled by kernel config
[    0.268584] Switched to clocksource arm_global_timer
[    0.290505] NET: Registered protocol family 2
[    0.291176] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.291234] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.291319] TCP: Hash tables configured (established 4096 bind 4096)
[    0.291367] TCP: reno registered
[    0.291385] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.291419] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.291672] NET: Registered protocol family 1
[    0.292013] RPC: Registered named UNIX socket transport module.
[    0.292025] RPC: Registered udp transport module.
[    0.292034] RPC: Registered tcp transport module.
[    0.292042] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.292056] PCI: CLS 0 bytes, default 64
[    0.292501] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.294555] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.296732] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.296929] msgmni has been set to 967
[    0.297726] io scheduler noop registered
[    0.297740] io scheduler deadline registered
[    0.297778] io scheduler cfq registered (default)
[    0.309972] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.309992] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.435021] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.002986] console [ttyPS0] enabled
[    1.007298] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.014976] [drm] Initialized drm 1.1.0 20060810
[    1.032296] brd: module loaded
[    1.041729] loop: module loaded
[    1.051560] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.057313] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.065472] libphy: XEMACPS mii bus: probed
[    1.070045] ------------- phy_id = 0x3625e62
[    1.074804] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.083451] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.090134] ehci-pci: EHCI PCI platform driver
[    1.097357] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.104189] usbcore: registered new interface driver usb-storage
[    1.111064] mousedev: PS/2 mouse device common for all mice
[    1.117188] i2c /dev entries driver
[    1.124163] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.129762] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.135670] Xilinx Zynq CpuIdle Driver started
[    1.140557] sdhci: Secure Digital Host Controller Interface driver
[    1.146646] sdhci: Copyright(c) Pierre Ossman
[    1.151060] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.157793] mmc0: no vqmmc regulator found
[    1.161836] mmc0: no vmmc regulator found
[    1.198600] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.207303] usbcore: registered new interface driver usbhid
[    1.212818] usbhid: USB HID core driver
[    1.217537] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.223835] nand: Micron MT29F2G08ABAEAWP
[    1.227799] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.233745] Bad block table found at page 131008, version 0x01
[    1.239967] Bad block table found at page 130944, version 0x01
[    1.246017] 3 ofpart partitions found on MTD device pl353-nand
[    1.251801] Creating 3 MTD partitions on "pl353-nand":
[    1.256890] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.265011] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.272344] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.281359] TCP: cubic registered
[    1.284594] NET: Registered protocol family 17
[    1.289318] Registering SWP/SWPB emulation handler
[    1.295243] regulator-dummy: disabling
[    1.299631] UBI: attaching mtd1 to ubi0
[    1.824991] UBI: scanning is finished
[    1.836683] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.843768] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.850530] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.857193] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.864072] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.870052] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.877159] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1105122292
[    1.886202] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.895419] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.895424] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.899478] ALSA device list:
[    1.899482]   No soundcards found.
[    1.915846] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.944769] UBIFS: recovery needed
[    2.002597] UBIFS: recovery completed
[    2.006272] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.012224] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.021366] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.031221] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.036247] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 3B7239D8-21A7-4628-8BEE-5D1CF3D22D35, small LPT model
[    2.047559] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.054750] devtmpfs: mounted
[    2.057862] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.905030] random: dd urandom read with 0 bits of entropy available
[    3.308601] 
[    3.308601] bcm54xx_config_init
[    3.918630] 
[    3.918630] bcm54xx_config_init
[    7.919448] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    7.925557] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   22.779774] In axi fpga driver!
[   22.782847] request_mem_region OK!
[   22.786238] AXI fpga dev virtual address is 0xdf9fc000
[   22.791496] *base_vir_addr = 0x8c510
[   22.813761] In fpga mem driver!
[   22.816847] request_mem_region OK!
[   22.820777] fpga mem virtual address is 0xe2000000
[   23.638623] 
[   23.638623] bcm54xx_config_init
[   24.268598] 
[   24.268598] bcm54xx_config_init
[   28.269451] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   28.275559] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
main.c:13927: log_level = 4
main.c:13954: This is XILINX board. Totalram:       507527168
main.c:13966: Detect 512MB control board of XILINX
driver-bitmain.c:1003: forceFreq=-1 forceFlag=0
main.c:8434: DETECT HW version=0008c510
main.c:13999: miner ID : 8010f5807850481c
main.c:14024: Miner Type = S9
main.c:14036: AsicType = 1387
main.c:14039: real AsicNum = 63
main.c:14132: use critical mode to search freq...
driver-bitmain.c:2401: get PLUG ON=0x000000e0
driver-bitmain.c:2471: Find hashboard on Chain[5]
driver-bitmain.c:2471: Find hashboard on Chain[6]
driver-bitmain.c:2471: Find hashboard on Chain[7]
driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff
main.c:2164: Check chain[5] PIC fw version=0x03
main.c:2164: Check chain[6] PIC fw version=0x03
main.c:2164: Check chain[7] PIC fw version=0x03
main.c:8799: read pic freq and badcore num...
main.c:8820: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:8862: has freq in PIC, will disable freq setting.
main.c:8961: chain[5] has freq in PIC and will jump over...
main.c:8965: Chain[5] has core num in PIC
main.c:2164: Check chain[5] PIC fw version=0x03
main.c:8799: read pic freq and badcore num...
main.c:8820: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:8862: has freq in PIC, will disable freq setting.
main.c:8961: chain[6] has freq in PIC and will jump over...
main.c:8965: Chain[6] has core num in PIC
main.c:8975: Chain[6] ASIC[1] has core num=1
main.c:8975: Chain[6] ASIC[20] has core num=1
main.c:2164: Check chain[6] PIC fw version=0x03
main.c:8799: read pic freq and badcore num...
main.c:8820: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:8862: has freq in PIC, will disable freq setting.
main.c:8961: chain[7] has freq in PIC and will jump over...
main.c:8965: Chain[7] has core num in PIC
main.c:8975: Chain[7] ASIC[49] has core num=5
main.c:2164: Check chain[7] PIC fw version=0x03
main.c:9039: get PIC voltage=142 on chain[5], value=860
main.c:9039: get PIC voltage=142 on chain[6], value=860
main.c:9039: get PIC voltage=142 on chain[7], value=860
driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000
main.c:9205: chain[5] temp offset record: 62,0,0,0,0,0,35,28
main.c:9222: chain[5] temp chip I2C addr=0x98
main.c:9228: chain[5] has no middle temp, use special fix mode.
main.c:9205: chain[6] temp offset record: 62,0,0,0,0,0,35,28
main.c:9222: chain[6] temp chip I2C addr=0x98
main.c:9228: chain[6] has no middle temp, use special fix mode.
main.c:9205: chain[7] temp offset record: 62,0,0,0,0,0,35,28
main.c:9222: chain[7] temp chip I2C addr=0x98
main.c:9228: chain[7] has no middle temp, use special fix mode.
main.c:13838: total_exist_chain_num = 3
driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff
driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000
main.c:9456: CRC error counter=0
main.c:9471: set command mode to VIL
main.c:9543: 
--- check asic number
main.c:9640: After Get ASIC NUM CRC error counter=0
main.c:9663: set_baud=0
main.c:10588: The min freq=700
main.c:10590: set real timeout 52, need sleep=379392
main.c:12720: After TEST CRC error counter=0
driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff
driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000
main.c:14167: search freq for 1 times, completed chain = 3, total chain num = 3 
board_frq_tuning.c:549: single_board_frq_tuning enter
board_frq_tuning.c:550: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:132: force_freq not set, don't need tuning
driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff
driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000
main.c:14559: restart Miner chance num=2
main.c:14599: waiting for receive_func to exit!
main.c:14613: waiting for pic heart to exit!
main.c:13809: bmminer not found= 1516 root       0:00 grep bmminer

main.c:14657: bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Jul 13 10:46:43 CST 2018 type: Antminer S9j
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8010f5807850481c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=5640
get fan[2] speed=5640
get fan[2] speed=5640
get fan[5] speed=5520
get fan[2] speed=5640
get fan[5] speed=5520
get fan[2] speed=5640
get fan[5] speed=5520
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:14931:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4e 0x00 0x4e 0x04 0x4e 0x0e 0x4e 0x00 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x01 0x4e 0x01 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x05 0x4e 0x06 0x4e 0x23 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=860
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:14931:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4e 0x00 0x4e 0x04 0x4e 0x0e 0x4e 0x00 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x01 0x4e 0x01 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x05 0x4e 0x06 0x4e 0x23 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=860
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:14931:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4e 0x00 0x4e 0x04 0x4e 0x0e 0x4e 0x00 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x01 0x4e 0x01 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x05 0x4e 0x06 0x4e 0x23 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=860
Check chain[7] PIC fw version=0x03
driver-btm-c5.c:13994:init_exist_chain_table: total_exist_chain_num = 3
Chain[J6] orignal chain_voltage_pic=142 value=860
Chain[J7] orignal chain_voltage_pic=142 value=860
Chain[J8] orignal chain_voltage_pic=142 value=860
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
driver-btm-c5.c:6333:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:6333:set_frequency: Chain[J7] has core num in PIC
driver-btm-c5.c:6343:set_frequency: Chain[J7] ASIC[1] has core num=1
driver-btm-c5.c:6343:set_frequency: Chain[J7] ASIC[20] has core num=1
driver-btm-c5.c:6333:set_frequency: Chain[J8] has core num in PIC
driver-btm-c5.c:6343:set_frequency: Chain[J8] ASIC[49] has core num=5
driver-btm-c5.c:6373:set_frequency: miner total rate=14538GH/s ideal_total_hash_rate = 14500GH/s
driver-btm-c5.c:6398:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:6400:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:6417:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:6529:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:6534:set_frequency: Chain:5 base freq=675
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675 
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675 
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675 
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675 
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675 
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675 
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675 
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675 
driver-btm-c5.c:6570:set_frequency: Chain:5 max freq=675
driver-btm-c5.c:6571:set_frequency: Chain:5 min freq=675

driver-btm-c5.c:6398:set_frequency: read PIC voltage=940 on chain[6]
driver-btm-c5.c:6400:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:6417:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:6529:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:6534:set_frequency: Chain:6 base freq=675
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675 
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675 
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675 
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675 
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675 
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675 
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675 
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675 
driver-btm-c5.c:6570:set_frequency: Chain:6 max freq=675
driver-btm-c5.c:6571:set_frequency: Chain:6 min freq=675

driver-btm-c5.c:6398:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:6400:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:6417:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:6529:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:6534:set_frequency: Chain:7 base freq=675
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675 
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675 
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675 
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675 
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675 
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675 
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675 
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675 
driver-btm-c5.c:6570:set_frequency: Chain:7 max freq=675
driver-btm-c5.c:6571:set_frequency: Chain:7 min freq=675


driver-btm-c5.c:6580:set_frequency: Miner fix freq ...
driver-btm-c5.c:6048:ProcessFixFreqForChips: totalRate = 14538, fixed_totalRate = 14645
driver-btm-c5.c:6615:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:6616:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:6635:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:6777:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:6782:set_frequency: Chain:5 base freq=675
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675 
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675 
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675 
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675 
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675 
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675 
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675 
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675 
driver-btm-c5.c:6829:set_frequency: Chain:5 max freq=675
driver-btm-c5.c:6830:set_frequency: Chain:5 min freq=675

driver-btm-c5.c:6615:set_frequency: read PIC voltage=940 on chain[6]
driver-btm-c5.c:6616:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:6635:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:6777:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:6782:set_frequency: Chain:6 base freq=675
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675 
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675 
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675 
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675 
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675 
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675 
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675 
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675 
driver-btm-c5.c:6829:set_frequency: Chain:6 max freq=675
driver-btm-c5.c:6830:set_frequency: Chain:6 min freq=675

driver-btm-c5.c:6615:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:6616:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:6635:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:6777:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:6782:set_frequency: Chain:7 base freq=675
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675 
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675 
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675 
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675 
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675 
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675 
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675 
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675 
driver-btm-c5.c:6829:set_frequency: Chain:7 max freq=675
driver-btm-c5.c:6830:set_frequency: Chain:7 min freq=675

driver-btm-c5.c:6838:set_frequency: max freq = 675
driver-btm-c5.c:5953:ProcessFixFreq: totalRate = 14538, fixed_totalRate = 14500
set baud=1
driver-btm-c5.c:8340:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:8374:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
driver-btm-c5.c:8382:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
driver-btm-c5.c:8407:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:24 remote:30 offset:24 
driver-btm-c5.c:8500:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=24 typeID=55
driver-btm-c5.c:8340:calibration_sensor_offset: Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:8374:calibration_sensor_offset: chain[7] temp chip I2C addr=0x98
driver-btm-c5.c:8382:calibration_sensor_offset: chain[7] has no middle temp, use special fix mode.
driver-btm-c5.c:8407:calibration_sensor_offset: Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:23 remote:27 offset:25 
driver-btm-c5.c:8500:calibration_sensor_offset: Chain[J7] chip[244] get middle temp offset=25 typeID=55
driver-btm-c5.c:8340:calibration_sensor_offset: Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:8374:calibration_sensor_offset: chain[8] temp chip I2C addr=0x98
driver-btm-c5.c:8382:calibration_sensor_offset: chain[8] has no middle temp, use special fix mode.
driver-btm-c5.c:8407:calibration_sensor_offset: Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[8] chip[244] local:23 remote:27 offset:25 
driver-btm-c5.c:8500:calibration_sensor_offset: Chain[J8] chip[244] get middle temp offset=25 typeID=55
single board rate=4847 voltage limit=880 on chain[5]
get PIC voltage=860 on chain[5], check: must be < 880
single board rate=4846 voltage limit=880 on chain[6]
get PIC voltage=860 on chain[6], check: must be < 880
single board rate=4844 voltage limit=880 on chain[7]
get PIC voltage=860 on chain[7], check: must be < 880
driver-btm-c5.c:13930:set_working_voltage: chain[5] last_testpatten_highest_pcb_temp = 48
driver-btm-c5.c:13887:slowly_downgrade_voltage: chain[5] current_voltage_value = 940
driver-btm-c5.c:13888:slowly_downgrade_voltage: chain[5] target_voltage_value = 860
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[5] set voltage to 930
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[5] set voltage to 920
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[5] set voltage to 910
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[5] set voltage to 900
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[5] set voltage to 890
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[5] set voltage to 880
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[5] set voltage to 870
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[5] set voltage to 860
driver-btm-c5.c:13915:slowly_downgrade_voltage: chain[5] set working voltage to 860
driver-btm-c5.c:13930:set_working_voltage: chain[6] last_testpatten_highest_pcb_temp = 48
driver-btm-c5.c:13887:slowly_downgrade_voltage: chain[6] current_voltage_value = 940
driver-btm-c5.c:13888:slowly_downgrade_voltage: chain[6] target_voltage_value = 860
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[6] set voltage to 930
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[6] set voltage to 920
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[6] set voltage to 910
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[6] set voltage to 900
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[6] set voltage to 890
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[6] set voltage to 880
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[6] set voltage to 870
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[6] set voltage to 860
driver-btm-c5.c:13915:slowly_downgrade_voltage: chain[6] set working voltage to 860
driver-btm-c5.c:13930:set_working_voltage: chain[7] last_testpatten_highest_pcb_temp = 48
driver-btm-c5.c:13887:slowly_downgrade_voltage: chain[7] current_voltage_value = 940
driver-btm-c5.c:13888:slowly_downgrade_voltage: chain[7] target_voltage_value = 860
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[7] set voltage to 930
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[7] set voltage to 920
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[7] set voltage to 910
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[7] set voltage to 900
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[7] set voltage to 890
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[7] set voltage to 880
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[7] set voltage to 870
driver-btm-c5.c:13905:slowly_downgrade_voltage: chain[7] set voltage to 860
driver-btm-c5.c:13915:slowly_downgrade_voltage: chain[7] set working voltage to 860
driver-btm-c5.c:15744:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=196 total_tv_end_sys=197
restartNum = 2 , auto-reinit enabled...
driver-btm-c5.c:10466:read_temp_func: last_testpatten_highest_pcb_temp = 48
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=80.6980 Asic[02]=77.5440 Asic[03]=71.1350 Asic[04]=79.3220 Asic[05]=81.6540 Asic[06]=72.7120 Asic[07]=66.8900 Asic[08]=70.6990 
Asic[09]=72.4600 Asic[10]=81.0840 Asic[11]=75.5980 Asic[12]=73.0310 Asic[13]=77.8460 Asic[14]=74.8590 Asic[15]=72.7120 Asic[16]=78.6340 
Asic[17]=69.6920 Asic[18]=77.9800 Asic[19]=69.2560 Asic[20]=76.3530 Asic[21]=80.2110 Asic[22]=76.4700 Asic[23]=76.7220 Asic[24]=73.5000 
Asic[25]=73.2490 Asic[26]=72.3600 Asic[27]=74.6250 Asic[28]=74.5740 Asic[29]=73.1480 Asic[30]=73.2820 Asic[31]=76.7720 Asic[32]=79.2550 
Asic[33]=77.7790 Asic[34]=73.7520 Asic[35]=74.1720 Asic[36]=82.0900 Asic[37]=80.1110 Asic[38]=78.5170 Asic[39]=71.4200 Asic[40]=72.2930 
Asic[41]=73.9200 Asic[42]=74.4570 Asic[43]=79.2050 Asic[44]=76.0340 Asic[45]=72.1920 Asic[46]=74.2890 Asic[47]=68.9870 Asic[48]=77.1240 
Asic[49]=75.4130 Asic[50]=71.6050 Asic[51]=80.4290 Asic[52]=73.7690 Asic[53]=76.8560 Asic[54]=74.2720 Asic[55]=76.1850 Asic[56]=73.8700 
Asic[57]=72.7620 Asic[58]=77.4770 Asic[59]=72.9640 Asic[60]=80.5300 Asic[61]=71.8730 Asic[62]=77.4600 Asic[63]=71.5040 

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=72.6950 Asic[02]=80.3460 Asic[03]=72.3090 Asic[04]=74.9940 Asic[05]=67.2930 Asic[06]=74.1040 Asic[07]=77.5770 Asic[08]=68.5680 
Asic[09]=74.1210 Asic[10]=79.1540 Asic[11]=75.8660 Asic[12]=77.4100 Asic[13]=74.2220 Asic[14]=71.8900 Asic[15]=75.3120 Asic[16]=81.7050 
Asic[17]=74.5070 Asic[18]=72.8970 Asic[19]=76.7890 Asic[20]=71.7720 Asic[21]=72.7290 Asic[22]=73.4500 Asic[23]=77.3760 Asic[24]=78.4330 
Asic[25]=76.7380 Asic[26]=79.6910 Asic[27]=74.2550 Asic[28]=85.3620 Asic[29]=69.1220 Asic[30]=74.7250 Asic[31]=73.8530 Asic[32]=69.1550 
Asic[33]=74.4740 Asic[34]=78.3660 Asic[35]=80.5470 Asic[36]=73.5680 Asic[37]=76.6040 Asic[38]=73.5840 Asic[39]=74.3060 Asic[40]=77.9800 
Asic[41]=69.0210 Asic[42]=78.5000 Asic[43]=74.3060 Asic[44]=73.5170 Asic[45]=73.4500 Asic[46]=73.7020 Asic[47]=77.3090 Asic[48]=76.2860 
Asic[49]=76.1510 Asic[50]=78.4670 Asic[51]=77.1240 Asic[52]=80.1440 Asic[53]=74.3730 Asic[54]=71.3190 Asic[55]=73.3490 Asic[56]=71.0170 
Asic[57]=69.8930 Asic[58]=74.7760 Asic[59]=75.7150 Asic[60]=83.0470 Asic[61]=83.3650 Asic[62]=71.4200 Asic[63]=73.0310 

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=78.8020 Asic[02]=74.1380 Asic[03]=73.4500 Asic[04]=70.1790 Asic[05]=68.7360 Asic[06]=76.8890 Asic[07]=72.6620 Asic[08]=75.8830 
Asic[09]=75.7650 Asic[10]=72.9470 Asic[11]=75.5140 Asic[12]=81.8220 Asic[13]=75.8490 Asic[14]=72.2760 Asic[15]=70.4810 Asic[16]=79.1540 
Asic[17]=73.8530 Asic[18]=73.1980 Asic[19]=75.4970 Asic[20]=70.7830 Asic[21]=72.1750 Asic[22]=75.9670 Asic[23]=74.4740 Asic[24]=79.2380 
Asic[25]=72.3260 Asic[26]=70.2790 Asic[27]=70.3300 Asic[28]=73.2820 Asic[29]=73.2660 Asic[30]=74.9270 Asic[31]=69.7260 Asic[32]=75.5470 
Asic[33]=65.3800 Asic[34]=80.6980 Asic[35]=77.8630 Asic[36]=74.1720 Asic[37]=71.3190 Asic[38]=72.3930 Asic[39]=73.9030 Asic[40]=75.6310 
Asic[41]=72.1920 Asic[42]=80.6810 Asic[43]=79.3220 Asic[44]=75.8490 Asic[45]=80.1780 Asic[46]=72.6780 Asic[47]=71.4700 Asic[48]=75.2450 
Asic[49]=76.1850 Asic[50]=75.4630 Asic[51]=79.7250 Asic[52]=77.5440 Asic[53]=72.8970 Asic[54]=79.4900 Asic[55]=76.1180 Asic[56]=74.7420 
Asic[57]=77.2590 Asic[58]=74.7250 Asic[59]=71.0170 Asic[60]=77.0910 Asic[61]=74.3730 Asic[62]=77.9630 Asic[63]=73.7520 
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[62] middle Temp=61
Special fix Chain[5] Chip[62] middle Temp = 70
Done read temp on Chain[5]
Chain[6] Chip[62] middle Temp=58
Special fix Chain[6] Chip[62] middle Temp = 66
Done read temp on Chain[6]
Chain[7] Chip[62] middle Temp=60
Special fix Chain[7] Chip[62] middle Temp = 66
Done read temp on Chain[7]
Max pcb temp : 55
set FAN speed according to: temp_highest=55 temp_top1[PWM_T]=55 temp_top1[TEMP_POS_LOCAL]=55 temp_change=3 fix_fan_steps=0
set normal FAN speed...
FAN PWM: 40
read_temp_func Done!
CRC error counter=0