Author

Topic: Antminer S9j no hasrate (Read 165 times)

legendary
Activity: 3472
Merit: 3217
Playbet.io - Crypto Casino and Sportsbook
May 27, 2019, 05:24:40 PM
#2
Can you try to follow my procedure here Step by step troubleshooting guide

Also, sometimes cleaning the hashboard may solve this issue. Check the PSU it looks like your PSU not giving enough power.
newbie
Activity: 12
Merit: 1
May 27, 2019, 05:03:11 PM
#1
I have a new Antminer S9J and this mining, this hasrate is 0 and temp 15 on the three hash-board
please Help me


Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000292] ps7-ttc #0 at df804000, irq=43
[    0.000597] Console: colour dummy device 80x30
[    0.000628] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040197] pid_max: default: 32768 minimum: 301
[    0.040410] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040430] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042615] CPU: Testing write buffer coherency: ok
[    0.042933] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042990] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.043209] L310 cache controller enabled
[    0.043228] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.120986] CPU1: Booted secondary processor
[    0.210219] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210347] Brought up 2 CPUs
[    0.210366] SMP: Total of 2 processors activated.
[    0.210375] CPU: All CPU(s) started in SVC mode.
[    0.211031] devtmpfs: initialized
[    0.213469] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214674] regulator-dummy: no parameters
[    0.222080] NET: Registered protocol family 16
[    0.224360] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226628] cpuidle: using governor ladder
[    0.226642] cpuidle: using governor menu
[    0.234026] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235548] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235561] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235677] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.257411] bio: create slab at 0
[    0.258791] vgaarb: loaded
[    0.259476] SCSI subsystem initialized
[    0.260415] usbcore: registered new interface driver usbfs
[    0.260595] usbcore: registered new interface driver hub
[    0.260823] usbcore: registered new device driver usb
[    0.262017] media: Linux media interface: v0.10
[    0.262177] Linux video capture interface: v2.00
[    0.262424] pps_core: LinuxPPS API ver. 1 registered
[    0.262436] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[    0.262560] PTP clock support registered
[    0.262907] EDAC MC: Ver: 3.0.0
[    0.264117] Advanced Linux Sound Architecture Driver Initialized.
[    0.266836] DMA-API: preallocated 4096 debug entries
[    0.266849] DMA-API: debugging enabled by kernel config
[    0.266925] Switched to clocksource arm_global_timer
[    0.286738] NET: Registered protocol family 2
[    0.287461] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.287519] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.287604] TCP: Hash tables configured (established 4096 bind 4096)
[    0.287648] TCP: reno registered
[    0.287664] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.287694] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.287929] NET: Registered protocol family 1
[    0.288252] RPC: Registered named UNIX socket transport module.
[    0.288265] RPC: Registered udp transport module.
[    0.288273] RPC: Registered tcp transport module.
[    0.288282] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288294] PCI: CLS 0 bytes, default 64
[    0.288722] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.290724] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.292820] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293006] msgmni has been set to 967
[    0.293777] io scheduler noop registered
[    0.293790] io scheduler deadline registered
[    0.293828] io scheduler cfq registered (default)
[    0.301207] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.301227] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.426711] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.994183] console [ttyPS0] enabled
[    0.998455] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.006048] [drm] Initialized drm 1.1.0 20060810
[    1.023205] brd: module loaded
[    1.032618] loop: module loaded
[    1.042022] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.047865] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.055602] libphy: XEMACPS mii bus: probed
[    1.060155] ------------- phy_id = 0x3625e62
[    1.064885] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.073769] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.080573] ehci-pci: EHCI PCI platform driver
[    1.087806] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.094593] usbcore: registered new interface driver usb-storage
[    1.101456] mousedev: PS/2 mouse device common for all mice
[    1.107565] i2c /dev entries driver
[    1.114460] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.119980] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.125869] Xilinx Zynq CpuIdle Driver started
[    1.130747] sdhci: Secure Digital Host Controller Interface driver
[    1.136839] sdhci: Copyright(c) Pierre Ossman
[    1.141227] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.147999] mmc0: no vqmmc regulator found
[    1.152015] mmc0: no vmmc regulator found
[    1.196961] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205641] usbcore: registered new interface driver usbhid
[    1.211161] usbhid: USB HID core driver
[    1.215863] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.222155] nand: Micron MT29F2G08ABAEAWP
[    1.226125] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.232066] Bad block table found at page 131008, version 0x01
[    1.238312] Bad block table found at page 130944, version 0x01
[    1.244360] 3 ofpart partitions found on MTD device pl353-nand
[    1.250137] Creating 3 MTD partitions on "pl353-nand":
[    1.255237] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.263309] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270623] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.281351] TCP: cubic registered
[    1.284585] NET: Registered protocol family 17
[    1.289288] Registering SWP/SWPB emulation handler
[    1.295173] regulator-dummy: disabling
[    1.299489] UBI: attaching mtd1 to ubi0
[    1.824196] UBI: scanning is finished
[    1.835845] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.842926] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.849688] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.856352] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.863230] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.869211] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.876318] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 251762771
[    1.885273] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.894490] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.894495] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.898508] ALSA device list:
[    1.898512]   No soundcards found.
[    1.914826] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    1.980866] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.986796] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.995938] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.005816] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.010853] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C32C42B1-7C6A-4282-B572-CDE010B46701, small LPT model
[    2.022188] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.029381] devtmpfs: mounted
[    2.032489] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.874711] random: dd urandom read with 1 bits of entropy available
[    3.266968]
[    3.266968] bcm54xx_config_init
[    3.876944]
[    3.876944] bcm54xx_config_init
[    6.877791] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    6.883885] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   21.310976] In axi fpga driver!
[   21.314044] request_mem_region OK!
[   21.317471] AXI fpga dev virtual address is 0xdf9fe000
[   21.322547] *base_vir_addr = 0xc51e
[   21.337091] In fpga mem driver!
[   21.340328] request_mem_region OK!
[   21.343889] fpga mem virtual address is 0xe2000000
[   22.136942]
[   22.136942] bcm54xx_config_init
[   22.766974]
[   22.766974] bcm54xx_config_init
[   25.767816] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   25.773837] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  336.354189] random: nonblocking pool is initialized
log_level = 4
This is XILINX board. Totalram:       507486208
Detect 512MB control board of XILINX
mmap axi_fpga_addr = 0xb6f39000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5d32000
forceFreq=-1 forceFlag=0
min work minertest[0]:912


DETECT HW version=0000c51e
miner ID : 8064e4c97990481c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Check chain[7] PIC fw version=0x03
get PIC voltage=74 on chain[5], value=900
get PIC voltage=74 on chain[6], value=900
get PIC voltage=74 on chain[7], value=900
chain[5] temp offset record: 62,0,0,0,0,0,37,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,37,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,37,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
total_exist_chain_num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1380 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Mon Mar 4 11:54:07 CST 2019 type: Antminer S9j
miner ID : 8064e4c97990481c
Checking fans...
get fan[4] speed=4440
get fan[4] speed=4440
get fan[5] speed=5880
get fan[4] speed=4440
get fan[5] speed=5880
get fan[4] speed=4440
get fan[5] speed=5880
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
origin last_freq: 0x00 0x7d 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x01 0x4e 0x01 0x4e 0x0f 0x4e 0x0e 0x4e 0x02 0x4e 0x01 0x4e 0x05 0x4e 0x06 0x4e 0x23 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has lpm backup chain_voltage=860
scan based on domain
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
origin last_freq: 0x00 0x7d 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x01 0x4e 0x01 0x4e 0x0f 0x4e 0x0e 0x4e 0x02 0x4e 0x01 0x4e 0x05 0x4e 0x06 0x4e 0x23 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has lpm backup chain_voltage=860
scan based on domain
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
origin last_freq: 0x00 0x7d 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x01 0x4e 0x01 0x4e 0x0e 0x4e 0x0e 0x4e 0x02 0x4e 0x01 0x4e 0x05 0x4e 0x06 0x4e 0x23 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has lpm backup chain_voltage=860
scan based on domain
Check chain[7] PIC fw version=0x03
total_exist_chain_num = 3
Chain[J6] orignal chain_voltage_pic=74 value=900
Chain[J6] will use backup chain_voltage_pic=860 [142]
Chain[J6] get working chain_voltage_pic=142
Chain[J7] orignal chain_voltage_pic=74 value=900
Chain[J7] will use backup chain_voltage_pic=860 [142]
Chain[J7] get working chain_voltage_pic=142
Chain[J8] orignal chain_voltage_pic=74 value=900
Chain[J8] will use backup chain_voltage_pic=860 [142]
Chain[J8] get working chain_voltage_pic=142
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J7] has core num in PIC
Chain[J8] has core num in PIC
totalrate = 14540
miner total rate=14540GH/s ideal_total_hash_rate = 14500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:5 max freq=675
Chain:5 min freq=675

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:6 max freq=675
Chain:6 min freq=675

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:7 max freq=675
Chain:7 min freq=675


Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:5 max freq=675
Chain:5 min freq=675

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:6 max freq=675
Chain:6 min freq=675

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:7 max freq=675
Chain:7 min freq=675

max freq = 675
totalRate = 14500, fixed_totalRate = 14500
set baud=1
Chain[J6] PIC temp offset: 62,0,0,0,0,0,37,28,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[5] chip[244] local:35 remote:-85 offset:-105, will fixed offset=27
New offset Chain[6] chip[244] local:35 remote:-85 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=1a
Chain[J7] PIC temp offset: 62,0,0,0,0,0,37,28,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[6] chip[244] local:36 remote:-85 offset:-104, will fixed offset=27
New offset Chain[7] chip[244] local:36 remote:-85 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=1a
Chain[J8] PIC temp offset: 62,0,0,0,0,0,37,28,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[7] chip[244] local:36 remote:-83 offset:-106, will fixed offset=27
New offset Chain[8] chip[244] local:36 remote:-83 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=1a
open core three times
open core three times
open core three times
setting to working voltage...
chain[5] set voltage to 930
chain[6] set voltage to 930
chain[7] set voltage to 930
chain[5] set voltage to 920
chain[6] set voltage to 920
chain[7] set voltage to 920
chain[5] set voltage to 910
chain[6] set voltage to 910
chain[7] set voltage to 910
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[5] set voltage to 890
chain[6] set voltage to 890
chain[7] set voltage to 890
chain[5] set voltage to 880
chain[6] set voltage to 880
chain[7] set voltage to 880
chain[5] set voltage to 870
chain[6] set voltage to 870
chain[7] set voltage to 870
chain[5] set voltage to 860
chain[6] set voltage to 860
chain[7] set voltage to 860
start thread for read temp
setStartTimePoint total_tv_start_sys=156 total_tv_end_sys=157
restartNum = 2 , auto-reinit enabled...
avg hash rate = 0.000000, ideal hash rate = 14500
hash rate is low...
re_open_core enter
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J7] has core num in PIC
Chain[J8] has core num in PIC
totalrate = 14540
miner total rate=14540GH/s ideal_total_hash_rate = 14500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:5 max freq=675
Chain:5 min freq=675

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:6 max freq=675
Chain:6 min freq=675

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:7 max freq=675
Chain:7 min freq=675


Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:5 max freq=675
Chain:5 min freq=675

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:6 max freq=675
Chain:6 min freq=675

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:7 max freq=675
Chain:7 min freq=675

max freq = 675
totalRate = 14500, fixed_totalRate = 14500
set baud=1
Chain[J6] PIC temp offset: 62,0,0,0,0,0,37,28,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[5] chip[244] local:37 remote:-83 offset:-105, will fixed offset=27
New offset Chain[6] chip[244] local:37 remote:-83 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=1a
Chain[J7] PIC temp offset: 62,0,0,0,0,0,37,28,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[6] chip[244] local:38 remote:-84 offset:-103, will fixed offset=27
New offset Chain[7] chip[244] local:38 remote:-84 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=1a
Chain[J8] PIC temp offset: 62,0,0,0,0,0,37,28,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[7] chip[244] local:37 remote:-81 offset:-107, will fixed offset=27
New offset Chain[8] chip[244] local:37 remote:-81 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=1a
chain[5] set voltage to 930
chain[6] set voltage to 930
chain[7] set voltage to 930
chain[5] set voltage to 920
chain[6] set voltage to 920
chain[7] set voltage to 920
chain[5] set voltage to 910
chain[6] set voltage to 910
chain[7] set voltage to 910
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
reopen core end
re-open core 1 times
checking hash again
avg hash rate = 0.000000, ideal hash rate = 14500
re_open_core_times: 1
re_open_core enter
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J7] has core num in PIC
Chain[J8] has core num in PIC
totalrate = 14540
miner total rate=14540GH/s ideal_total_hash_rate = 14500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:5 max freq=675
Chain:5 min freq=675

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:6 max freq=675
Chain:6 min freq=675

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:7 max freq=675
Chain:7 min freq=675


Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:5 max freq=675
Chain:5 min freq=675

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:6 max freq=675
Chain:6 min freq=675

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:7 max freq=675
Chain:7 min freq=675

max freq = 675
totalRate = 14500, fixed_totalRate = 14500
set baud=1
Chain[J6] PIC temp offset: 62,0,0,0,0,0,37,28,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[5] chip[244] local:37 remote:-83 offset:-105, will fixed offset=27
New offset Chain[6] chip[244] local:37 remote:-83 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=1a
Chain[J7] PIC temp offset: 62,0,0,0,0,0,37,28,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[6] chip[244] local:38 remote:-83 offset:-104, will fixed offset=27
New offset Chain[7] chip[244] local:38 remote:-83 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=1a
Chain[J8] PIC temp offset: 62,0,0,0,0,0,37,28,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[7] chip[244] local:37 remote:-80 offset:-108, will fixed offset=27
New offset Chain[8] chip[244] local:37 remote:-80 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=1a
chain[5] set voltage to 930
chain[6] set voltage to 930
chain[7] set voltage to 930
chain[5] set voltage to 920
chain[6] set voltage to 920
chain[7] set voltage to 920
chain[5] set voltage to 910
chain[6] set voltage to 910
chain[7] set voltage to 910
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
reopen core end
avg hash rate = 0.000000, ideal hash rate = 14500
hash rate is low...
re_open_core enter
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 0 asic
i = 7, retry_count = 0, dev->chain_asic_num[i] = 0
retry Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J7] has core num in PIC
Chain[J8] has core num in PIC
totalrate = 14540
miner total rate=14540GH/s ideal_total_hash_rate = 14500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:5 max freq=675
Chain:5 min freq=675

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:6 max freq=675
Chain:6 min freq=675

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:7 max freq=675
Chain:7 min freq=675


Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:5 max freq=675
Chain:5 min freq=675

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:6 max freq=675
Chain:6 min freq=675

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=100
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:7 max freq=675
Chain:7 min freq=675

max freq = 675
totalRate = 14500, fixed_totalRate = 14500
set baud=1
Chain[J6] PIC temp offset: 62,0,0,0,0,0,37,28,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[5] chip[244] local:38 remote:-82 offset:-105, will fixed offset=27
New offset Chain[6] chip[244] local:38 remote:-82 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=1a
Chain[J7] PIC temp offset: 62,0,0,0,0,0,37,28,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[6] chip[244] local:39 remote:-82 offset:-104, will fixed offset=27
New offset Chain[7] chip[244] local:39 remote:-82 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=1a
Chain[J8] PIC temp offset: 62,0,0,0,0,0,37,28,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[7] chip[244] local:36 remote:-81 offset:-108, will fixed offset=27
New offset Chain[8] chip[244] local:36 remote:-81 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=1a
chain[5] set voltage to 930
chain[6] set voltage to 930
chain[7] set voltage to 930
chain[5] set voltage to 920
chain[6] set voltage to 920
chain[7] set voltage to 920
chain[5] set voltage to 910
chain[6] set voltage to 910
chain[7] set voltage to 910
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
reopen core end
re-open core 2 times
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)

get RT hashrate from Chain[6]: (asic index start from 1-63)

get RT hashrate from Chain[7]: (asic index start from 1-63)
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
read failed on Chain[5] Chip[62] middle Temp old value:15
Special fix Chain[5] Chip[62] middle Temp = 15
Done read temp on Chain[5]
read failed on Chain[6] Chip[62] middle Temp old value:15
Special fix Chain[6] Chip[62] middle Temp = 15
Done read temp on Chain[6]
read failed on Chain[7] Chip[62] middle Temp old value:15
Special fix Chain[7] Chip[62] middle Temp = 15
Done read temp on Chain[7]
Max pcb temp : 0
set FAN speed according to: temp_highest=0 temp_top1[PWM_T]=0 temp_top1[TEMP_POS_LOCAL]=0 temp_change=0 fix_fan_steps=0
set full FAN speed...
FAN PWM: 100
read_temp_func Done!
CRC error counter=299
Jump to: