Topic: Antminer shuts down unexpectedly (Read 669 times)
i've tried 3-4different psu but everyone was cheap not a big name such as CM i ve tried 835 watt 80+ bronze and still had the same problem
Hello
i have 4 antminers s5 with 858watt psu 80% power efficiency and the problem is that after a couple of hours working properly the miners shuts down and i have to close the psu wait 10-15 minutes in order to shut them on
any ideas what might be the problem?
i have 4 antminers s5 with 858watt psu 80% power efficiency and the problem is that after a couple of hours working properly the miners shuts down and i have to close the psu wait 10-15 minutes in order to shut them on
any ideas what might be the problem?
Since you have 4 antminers, I presume you have more than 1 PSU?
Give another PSU a shot, if it's just cutting out and you're not able to power it back on, I'd say PSU is at fault.
Worth a try?
Hello
i have 4 antminers s5 with 858watt psu 80% power efficiency and the problem is that after a couple of hours working properly the miners shuts down and i have to close the psu wait 10-15 minutes in order to shut them on
any ideas what might be the problem?
i have 4 antminers s5 with 858watt psu 80% power efficiency and the problem is that after a couple of hours working properly the miners shuts down and i have to close the psu wait 10-15 minutes in order to shut them on
any ideas what might be the problem?
It looks like a damaged PSU. I recommend a good CM(Cooler Master)V1000 up to 1000 watt and I am sure you will not have any more problems if the temps are like you are saying.
However I am curious, where do you live because S5 is profitable only with free electricity ?
Most certainly it's a PSU problem, try swapping with a diff one.
the temps are always 45-55 c
Hello
i have 4 antminers s5 with 858watt psu 80% power efficiency and the problem is that after a couple of hours working properly the miners shuts down and i have to close the psu wait 10-15 minutes in order to shut them on
any ideas what might be the problem?
i have 4 antminers s5 with 858watt psu 80% power efficiency and the problem is that after a couple of hours working properly the miners shuts down and i have to close the psu wait 10-15 minutes in order to shut them on
any ideas what might be the problem?
Check Ventilation, Cooling, the Antminer is probably overheating and to prevent more damage to the system.
Hello
i have 4 antminers s5 with 858watt psu 80% power efficiency and the problem is that after a couple of hours working properly the miners shuts down and i have to close the psu wait 10-15 minutes in order to shut them on
any ideas what might be the problem?
i have 4 antminers s5 with 858watt psu 80% power efficiency and the problem is that after a couple of hours working properly the miners shuts down and i have to close the psu wait 10-15 minutes in order to shut them on
any ideas what might be the problem?
Jump to: