Topic: Antminer T17e two hash boards not responding out of three. (Read 226 times)

2021-03-14 08:22:29:thread.c:1523:create_read_nonce_reg_thread: create thread
2021-03-14 08:22:29:driver-btm-api.c:698:dump_pcb_bom_version: Chain [0] PCB Version: 0x010a
2021-03-14 08:22:29:driver-btm-api.c:699:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2021-03-14 08:22:29:driver-btm-api.c:698:dump_pcb_bom_version: Chain [1] PCB Version: 0x010a
2021-03-14 08:22:29:driver-btm-api.c:699:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2021-03-14 08:22:29:driver-btm-api.c:698:dump_pcb_bom_version: Chain [2] PCB Version: 0x010a
2021-03-14 08:22:29:driver-btm-api.c:699:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2021-03-14 08:22:35:driver-btm-api.c:2344:bitmain_board_init: Fan check passed.
2021-03-14 08:22:36:board.c:81:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2021-03-14 08:22:39:board.c:94:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2021-03-14 08:22:40:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-03-14 08:22:42:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2021-03-14 08:22:43:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-03-14 08:22:45:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2021-03-14 08:22:45:thread.c:1518:create_pic_heart_beat_thread: create thread
2021-03-14 08:22:46:power_api.c:241:power_init: power type version: 0x0042
2021-03-14 08:22:48:power_api.c:259:power_init: Power init:
2021-03-14 08:22:48:power_api.c:260:power_init: current_voltage_raw     = 2136
2021-03-14 08:22:48:power_api.c:261:power_init: highest_voltage_raw     = 2000
2021-03-14 08:22:48:power_api.c:262:power_init: working_voltage_raw     = 1800
2021-03-14 08:22:48:power_api.c:263:power_init: higher_voltage_raw      = 1850
2021-03-14 08:22:48:power_api.c:264:power_init: check_asic_voltage_raw  = 1800
2021-03-14 08:22:48:driver-btm-api.c:2354:bitmain_board_init: Enter 60s sleep to make sure power release finish.
2021-03-14 08:23:50:driver-btm-api.c:1123:check_asic_number_until_volt_balance: THIS is No.1 time boost asic:
2021-03-14 08:23:50:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw  = 1800
2021-03-14 08:23:53:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
2021-03-14 08:24:14:uart.c:69:set_baud: set UART baud to 115200
chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-03-14 08:24:19:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[0]: find 78 asic, times 0
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-03-14 08:24:23:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2021-03-14 08:24:24:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-03-14 08:24:26:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2021-03-14 08:24:26:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw  = 1900
2021-03-14 08:24:26:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1900, step by step.
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-03-14 08:24:44:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
2021-03-14 08:24:45:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-03-14 08:24:47:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2021-03-14 08:24:47:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw  = 2000
2021-03-14 08:24:47:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-03-14 08:25:05:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2021-03-14 08:25:07:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-03-14 08:25:09:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2021-03-14 08:25:09:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw  = 2100
2021-03-14 08:25:09:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-03-14 08:25:25:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 3
2021-03-14 08:25:27:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2021-03-14 08:25:29:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2021-03-14 08:25:29:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw  = 1800
2021-03-14 08:25:29:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
2021-03-14 08:25:49:driver-btm-api.c:1217:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-03-14 08:25:54:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
2021-03-14 08:25:55:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-03-14 08:25:57:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2021-03-14 08:25:57:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw  = 1900
2021-03-14 08:25:57:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1900, step by step.
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-03-14 08:26:11:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
2021-03-14 08:26:12:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-03-14 08:26:14:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2021-03-14 08:26:14:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw  = 2000
2021-03-14 08:26:14:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-03-14 08:26:29:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
2021-03-14 08:26:30:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-03-14 08:26:32:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2021-03-14 08:26:32:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw  = 2100
2021-03-14 08:26:32:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-03-14 08:26:46:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 3
2021-03-14 08:26:47:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-03-14 08:26:49:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2021-03-14 08:26:49:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw  = 1800
2021-03-14 08:26:49:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
2021-03-14 08:27:07:driver-btm-api.c:1217:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
2021-03-14 08:27:08:driver-btm-api.c:1163:check_asic_number_until_volt_balance: PASS: volt balance at No.1 time boost asic.
2021-03-14 08:27:08:power_api.c:364:set_to_highest_voltage_by_steps: Set to voltage raw 2000, step by step.
2021-03-14 08:27:22:driver-hash-chip.c:876:set_uart_relay: set uart relay to 0x330003
2021-03-14 08:27:22:driver-hash-chip.c:1264:set_ldo_ctrl: Set LDO to 0x2000203
2021-03-14 08:27:23:driver-hash-chip.c:717:dump_adc_voltage_v2: chain 0 domain 03 core_domain 3: range too wide 1.496704 ~ 1.607300 = 0.110596
2021-03-14 08:27:23:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain  0:   d0 0.392,   d1 0.400,   d2 0.380,   d3 0.390,   sum = 1.561523
chain 0 domain  1:   d0 0.380,   d1 0.379,   d2 0.392,   d3 0.374,   sum = 1.525208
chain 0 domain  2:   d0 0.380,   d1 0.380,   d2 0.369,   d3 0.367,   sum = 1.495483
chain 0 domain  3:   d0 0.391,   d1 0.388,   d2 0.389,   d3 0.386,   sum = 1.553223
chain 0 domain  4:   d0 0.384,   d1 0.379,   d2 0.389,   d3 0.380,   sum = 1.530701
chain 0 domain  5:   d0 0.404,   d1 0.398,   d2 0.391,   d3 0.398,   sum = 1.590515
chain 0 domain  6:   d0 0.377,   d1 0.381,   d2 0.375,   d3 0.361,   sum = 1.494934
chain 0 domain  7:   d0 0.372,   d1 0.367,   d2 0.380,   d3 0.366,   sum = 1.484985
chain 0 domain  8:   d0 0.371,   d1 0.364,   d2 0.377,   d3 0.360,   sum = 1.471252
chain 0 domain  9:   d0 0.384,   d1 0.384,   d2 0.370,   d3 0.365,   sum = 1.502380
chain 0 domain 10:   d0 0.376,   d1 0.375,   d2 0.375,   d3 0.367,   sum = 1.494141
chain 0 domain 11:   d0 0.377,   d1 0.368,   d2 0.366,   d3 0.373,   sum = 1.483948
chain 0 domain 12:   d0 0.366,   d1 0.368,   d2 0.366,   d3 0.366,   sum = 1.466309
chain 0 domain 00 core_domain 0:   0.392   0.000  -0.002   0.001   0.001   0.001 
chain 0 domain 00 core_domain 1:   0.791   0.002  -0.003   0.003  -0.002   0.002 
chain 0 domain 00 core_domain 2:   1.169   0.004  -0.005   0.005  -0.001   0.004 
chain 0 domain 00 core_domain 3:   1.559   0.005  -0.007   0.007  -0.002   0.005 
chain 0 domain 01 core_domain 0:   0.380  -0.001   0.000   0.001   0.001  -0.002 
chain 0 domain 01 core_domain 1:   0.766  -0.010  -0.000   0.001   0.003  -0.003 
chain 0 domain 01 core_domain 2:   1.140   0.011  -0.000   0.003   0.005  -0.005 
chain 0 domain 01 core_domain 3:   1.498   0.036  -0.036   0.038   0.007  -0.006 
chain 0 domain 02 core_domain 0:   0.375   0.005   0.001   0.000  -0.001   0.000 
chain 0 domain 02 core_domain 1:   0.748   0.014   0.001   0.001  -0.002   0.001 
chain 0 domain 02 core_domain 2:   1.139  -0.011   0.000  -0.001  -0.003   0.001 
chain 0 domain 02 core_domain 3:   1.495   0.002  -0.001  -0.000  -0.001   0.000 
chain 0 domain 03 core_domain 0:   0.383   0.001   0.003  -0.002   0.019  -0.001 
chain 0 domain 03 core_domain 1:   0.761   0.006   0.003  -0.003   0.040  -0.003 
chain 0 domain 03 core_domain 2:   1.138   0.015   0.004  -0.006   0.055  -0.005 
chain 0 domain 03 core_domain 3:   1.497   0.040   0.006  -0.008   0.073  -0.006 
chain 0 domain 04 core_domain 0:   0.379   0.007  -0.001  -0.000   0.000   0.000 
chain 0 domain 04 core_domain 1:   0.765  -0.001  -0.002  -0.002   0.001   0.002 
chain 0 domain 04 core_domain 2:   1.142   0.014  -0.004  -0.002   0.001   0.002 
chain 0 domain 04 core_domain 3:   1.498   0.044  -0.005  -0.003   0.002   0.003 
chain 0 domain 05 core_domain 0:   0.399   0.006  -0.001   0.002  -0.002   0.002 
chain 0 domain 05 core_domain 1:   0.794   0.010  -0.003   0.004  -0.004   0.003 
chain 0 domain 05 core_domain 2:   1.198  -0.007  -0.002   0.006  -0.004   0.004 
chain 0 domain 05 core_domain 3:   1.597  -0.009  -0.003   0.008  -0.006   0.005 
chain 0 domain 06 core_domain 0:   0.380  -0.003  -0.001   0.000  -0.000   0.001 
chain 0 domain 06 core_domain 1:   0.755   0.005  -0.003   0.001   0.001   0.000 
chain 0 domain 06 core_domain 2:   1.142  -0.008  -0.004   0.001   0.000   0.000 
chain 0 domain 06 core_domain 3:   1.499  -0.004  -0.001   0.000  -0.000   0.000 
chain 0 domain 07 core_domain 0:   0.376  -0.004  -0.001   0.002  -0.003   0.001 
chain 0 domain 07 core_domain 1:   0.743  -0.004  -0.004   0.005  -0.003   0.001 
chain 0 domain 07 core_domain 2:   1.102   0.022  -0.005   0.005  -0.004   0.003 
chain 0 domain 07 core_domain 3:   1.480   0.009  -0.007   0.007  -0.007   0.004 
chain 0 domain 08 core_domain 0:   0.367   0.006  -0.001   0.001  -0.003   0.002 
chain 0 domain 08 core_domain 1:   0.733   0.002  -0.001   0.002  -0.003   0.001 
chain 0 domain 08 core_domain 2:   1.107   0.005  -0.002   0.004  -0.003   0.002 
chain 0 domain 08 core_domain 3:   1.462   0.011  -0.002   0.005  -0.004   0.001 
chain 0 domain 09 core_domain 0:   0.386  -0.003   0.001   0.000  -0.003   0.001 
chain 0 domain 09 core_domain 1:   0.760   0.007   0.003   0.001  -0.005   0.003 
chain 0 domain 09 core_domain 2:   1.148  -0.016   0.006   0.002  -0.007   0.004 
chain 0 domain 09 core_domain 3:   1.531  -0.035   0.002   0.000  -0.002   0.000 
chain 0 domain 10 core_domain 0:   0.379  -0.002  -0.001   0.000  -0.001   0.000 
chain 0 domain 10 core_domain 1:   0.760  -0.009  -0.001   0.001  -0.003   0.001 
chain 0 domain 10 core_domain 2:   1.141  -0.017  -0.001   0.001  -0.003   0.004 
chain 0 domain 10 core_domain 3:   1.496  -0.002  -0.001   0.001  -0.001   0.001 
chain 0 domain 11 core_domain 0:   0.373   0.005  -0.001  -0.000  -0.000   0.001 
chain 0 domain 11 core_domain 1:   0.746  -0.001  -0.001   0.001  -0.001   0.001 
chain 0 domain 11 core_domain 2:   1.123  -0.015  -0.001   0.001  -0.001   0.002 
chain 0 domain 11 core_domain 3:   1.484   0.001  -0.002   0.002  -0.001   0.002 
chain 0 domain 12 core_domain 0:   0.365   0.002  -0.001   0.000  -0.001   0.001 
chain 0 domain 12 core_domain 1:   0.733   0.001   0.001   0.000  -0.001   0.001 
chain 0 domain 12 core_domain 2:   1.099   0.000   0.001   0.001  -0.001   0.002 
chain 0 domain 12 core_domain 3:   1.466  -0.001   0.001   0.001  -0.001   0.002 
2021-03-14 08:27:23:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-03-14 08:27:25:temperature.c:272:calibrate_temp_sensor_one_chain: chain 0 temp sensor TMP451
2021-03-14 08:27:30:driver-btm-api.c:311:check_bringup_temp: Bring up temperature is 19
2021-03-14 08:27:30:uart.c:69:set_baud: set UART baud to 3000000
2021-03-14 08:27:30 voltage[0] = 1840
2021-03-14 08:27:31:power_api.c:272:set_working_voltage_raw: working_voltage_raw = 1840
2021-03-14 08:27:31:thread.c:1538:create_check_miner_status_thread: create thread
2021-03-14 08:27:31:thread.c:1528:create_show_miner_status_thread: create thread
2021-03-14 08:27:31:thread.c:1503:create_temperature_monitor_thread: create thread
2021-03-14 08:27:31:thread.c:1580:create_fan_monitor_thread: create thread
2021-03-14 08:27:31:frequency.c:578:inc_freq_with_fixed_vco: chain = 255, freq = 615, is_higher_voltage = true
2021-03-14 08:27:37:frequency.c:623:inc_freq_with_fixed_vco: get pcb 19 ~ 21, chip_temp 24 ~ 26, now 6.0s, target 27.0
2021-03-14 08:27:38:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 21, chip_temp 24 ~ 26, now 7.0s, target 27.2
2021-03-14 08:27:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 21, chip_temp 24 ~ 26, now 8.0s, target 27.3
2021-03-14 08:27:40:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 21, chip_temp 24 ~ 27, now 9.0s, target 27.5
2021-03-14 08:27:41:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 21, chip_temp 24 ~ 27, now 10.0s, target 27.7
2021-03-14 08:27:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 21, chip_temp 24 ~ 27, now 11.0s, target 27.8
2021-03-14 08:27:43:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 21, chip_temp 24 ~ 27, now 12.0s, target 28.0
2021-03-14 08:27:44:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 21, chip_temp 24 ~ 27, now 13.0s, target 28.2
2021-03-14 08:27:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 21, chip_temp 25 ~ 27, now 14.0s, target 28.3
2021-03-14 08:27:46:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 21, chip_temp 25 ~ 27, now 15.0s, target 28.5
2021-03-14 08:27:47:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 21, chip_temp 25 ~ 27, now 16.0s, target 28.7
2021-03-14 08:27:48:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 21, chip_temp 25 ~ 27, now 17.0s, target 28.8
2021-03-14 08:27:49:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 21, chip_temp 25 ~ 28, now 18.0s, target 29.0
2021-03-14 08:27:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 21, chip_temp 25 ~ 28, now 19.0s, target 29.2
2021-03-14 08:27:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 22, chip_temp 25 ~ 28, now 20.0s, target 29.3
2021-03-14 08:27:52:frequency.c:623:inc_freq_with_fixed_vco: get pcb 20 ~ 22, chip_temp 25 ~ 28, now 21.0s, target 29.5
2021-03-14 08:27:53:frequency.c:623:inc_freq_with_fixed_vco: get pcb 21 ~ 22, chip_temp 25 ~ 28, now 22.0s, target 29.7
2021-03-14 08:27:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 21 ~ 22, chip_temp 26 ~ 28, now 23.0s, target 29.8
2021-03-14 08:27:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 21 ~ 22, chip_temp 26 ~ 28, now 24.0s, target 30.0
2021-03-14 08:27:55:frequency.c:657:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 62
2021-03-14 08:27:55:frequency.c:665:inc_freq_with_fixed_vco: set to 62M, get pcb 21 ~ 22, chip_temp 26 ~ 28
2021-03-14 08:27:55:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2100, step by step.
2021-03-14 08:28:03:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-03-14 08:28:03:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 62 clock_counter_limit 6, no check, skip.
2021-03-14 08:28:11:frequency.c:623:inc_freq_with_fixed_vco: get pcb 22 ~ 24, chip_temp 28 ~ 30, now 40.4s, target 32.7
2021-03-14 08:28:11:frequency.c:657:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 73
2021-03-14 08:28:11:frequency.c:665:inc_freq_with_fixed_vco: set to 73M, get pcb 22 ~ 24, chip_temp 28 ~ 30
2021-03-14 08:28:11:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-03-14 08:28:11:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 73 clock_counter_limit 8, no check, skip.
2021-03-14 08:28:19:frequency.c:623:inc_freq_with_fixed_vco: get pcb 22 ~ 25, chip_temp 29 ~ 32, now 48.4s, target 34.1
2021-03-14 08:28:19:frequency.c:657:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 85
2021-03-14 08:28:19:frequency.c:665:inc_freq_with_fixed_vco: set to 85M, get pcb 22 ~ 25, chip_temp 29 ~ 32
2021-03-14 08:28:19:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-03-14 08:28:19:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 85 clock_counter_limit 10, no check, skip.
2021-03-14 08:28:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 23 ~ 26, chip_temp 31 ~ 33, now 56.4s, target 35.4
2021-03-14 08:28:27:frequency.c:657:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 87
2021-03-14 08:28:27:frequency.c:665:inc_freq_with_fixed_vco: set to 87M, get pcb 23 ~ 26, chip_temp 31 ~ 33
2021-03-14 08:28:27:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-03-14 08:28:27:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 87 clock_counter_limit 10, no check, skip.
2021-03-14 08:28:35:frequency.c:623:inc_freq_with_fixed_vco: get pcb 23 ~ 27, chip_temp 32 ~ 34, now 64.4s, target 36.7
2021-03-14 08:28:35:frequency.c:657:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 102
2021-03-14 08:28:35:frequency.c:665:inc_freq_with_fixed_vco: set to 102M, get pcb 23 ~ 27, chip_temp 32 ~ 34
2021-03-14 08:28:35:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-03-14 08:28:35:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 102 clock_counter_limit 13, no check, skip.
2021-03-14 08:28:43:frequency.c:623:inc_freq_with_fixed_vco: get pcb 24 ~ 28, chip_temp 34 ~ 35, now 72.4s, target 38.1
2021-03-14 08:28:43:frequency.c:657:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 109
2021-03-14 08:28:43:frequency.c:665:inc_freq_with_fixed_vco: set to 109M, get pcb 24 ~ 28, chip_temp 34 ~ 35
2021-03-14 08:28:43:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-03-14 08:28:43:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 109 clock_counter_limit 14, no check, skip.
2021-03-14 08:28:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 24 ~ 29, chip_temp 35 ~ 37, now 80.4s, target 39.4
2021-03-14 08:28:51:frequency.c:657:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 123
2021-03-14 08:28:51:frequency.c:665:inc_freq_with_fixed_vco: set to 123M, get pcb 24 ~ 29, chip_temp 35 ~ 37
2021-03-14 08:28:51:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-03-14 08:28:51:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 123 clock_counter_limit 16, no check, skip.
2021-03-14 08:28:59:frequency.c:623:inc_freq_with_fixed_vco: get pcb 25 ~ 30, chip_temp 37 ~ 38, now 88.4s, target 40.7
2021-03-14 08:28:59:frequency.c:657:inc_freq_with_fixed_vco: [7] _POSTDIV1 = 6, _POSTDIV2 = 4, USER_DIV = 1, freq = 128
2021-03-14 08:28:59:frequency.c:665:inc_freq_with_fixed_vco: set to 128M, get pcb 25 ~ 30, chip_temp 37 ~ 38
2021-03-14 08:28:59:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-03-14 08:28:59:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 128 clock_counter_limit 17, no check, skip.
2021-03-14 08:29:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 25 ~ 32, chip_temp 38 ~ 40, now 96.4s, target 42.1
2021-03-14 08:29:07:frequency.c:657:inc_freq_with_fixed_vco: [8] _POSTDIV1 = 7, _POSTDIV2 = 3, USER_DIV = 1, freq = 146
2021-03-14 08:29:07:frequency.c:665:inc_freq_with_fixed_vco: set to 146M, get pcb 25 ~ 32, chip_temp 38 ~ 40
2021-03-14 08:29:07:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-03-14 08:29:07:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 146 clock_counter_limit 20, no check, skip.
2021-03-14 08:29:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 33, chip_temp 40 ~ 42, now 104.4s, target 43.4
2021-03-14 08:29:16:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 33, chip_temp 40 ~ 42, now 105.4s, target 43.6
2021-03-14 08:29:17:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 34, chip_temp 40 ~ 43, now 106.4s, target 43.7
2021-03-14 08:29:18:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 34, chip_temp 40 ~ 43, now 107.4s, target 43.9
2021-03-14 08:29:19:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 34, chip_temp 40 ~ 43, now 108.4s, target 44.1
2021-03-14 08:29:20:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 34, chip_temp 40 ~ 43, now 109.4s, target 44.2
2021-03-14 08:29:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 34, chip_temp 40 ~ 44, now 110.5s, target 44.4
2021-03-14 08:29:22:frequency.c:623:inc_freq_with_fixed_vco: get pcb 26 ~ 35, chip_temp 40 ~ 44, now 111.5s, target 44.6
2021-03-14 08:29:23:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 35, chip_temp 41 ~ 44, now 112.5s, target 44.7
2021-03-14 08:29:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 35, chip_temp 41 ~ 44, now 113.5s, target 44.9
2021-03-14 08:29:25:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 35, chip_temp 41 ~ 45, now 114.5s, target 45.1
2021-03-14 08:29:26:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 35, chip_temp 41 ~ 45, now 115.5s, target 45.2
2021-03-14 08:29:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 35, chip_temp 41 ~ 45, now 116.5s, target 45.4
2021-03-14 08:29:28:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 36, chip_temp 41 ~ 45, now 117.5s, target 45.6
2021-03-14 08:29:29:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 36, chip_temp 41 ~ 45, now 118.5s, target 45.7
2021-03-14 08:29:30:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 36, chip_temp 41 ~ 46, now 119.5s, target 45.9
2021-03-14 08:29:30:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 46 > 45.9 target_temp.
2021-03-14 08:29:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 27 ~ 37, chip_temp 42 ~ 47, now 125.5s, target 46.9
2021-03-14 08:29:36:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 47 > 46.9 target_temp.
2021-03-14 08:29:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 38, chip_temp 42 ~ 48, now 131.5s, target 47.9
2021-03-14 08:29:42:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 48 > 47.9 target_temp.
2021-03-14 08:29:48:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 39, chip_temp 42 ~ 50, now 137.5s, target 48.9
2021-03-14 08:29:48:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 50 > 48.9 target_temp.
2021-03-14 08:29:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 40, chip_temp 42 ~ 50, now 143.5s, target 49.9
2021-03-14 08:29:54:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 50 > 49.9 target_temp.
2021-03-14 08:30:00:frequency.c:623:inc_freq_with_fixed_vco: get pcb 28 ~ 41, chip_temp 42 ~ 51, now 149.5s, target 50.9
2021-03-14 08:30:00:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 51 > 50.9 target_temp.
2021-03-14 08:30:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 42, chip_temp 43 ~ 53, now 155.5s, target 51.9
2021-03-14 08:30:06:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 53 > 51.9 target_temp.
2021-03-14 08:30:12:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 43, chip_temp 42 ~ 54, now 161.5s, target 52.9
2021-03-14 08:30:12:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 54 > 52.9 target_temp.
2021-03-14 08:30:18:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 44, chip_temp 43 ~ 55, now 167.5s, target 53.9
2021-03-14 08:30:18:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 55 > 53.9 target_temp.
2021-03-14 08:30:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 45, chip_temp 43 ~ 55, now 173.5s, target 54.9
2021-03-14 08:30:24:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 55 > 54.9 target_temp.
2021-03-14 08:30:30:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 45, chip_temp 43 ~ 56, now 179.5s, target 55.9
2021-03-14 08:30:30:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 56 > 55.9 target_temp.
2021-03-14 08:30:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 46, chip_temp 43 ~ 57, now 185.5s, target 56.9
2021-03-14 08:30:36:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 57 > 56.9 target_temp.
2021-03-14 08:30:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 47, chip_temp 43 ~ 58, now 191.5s, target 57.9
2021-03-14 08:30:42:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 58 > 57.9 target_temp.
2021-03-14 08:30:48:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 47, chip_temp 43 ~ 58, now 197.5s, target 58.9
2021-03-14 08:30:49:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 48, chip_temp 43 ~ 58, now 198.5s, target 59.1
2021-03-14 08:30:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 48, chip_temp 43 ~ 59, now 199.5s, target 59.2
2021-03-14 08:30:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 48, chip_temp 43 ~ 59, now 200.5s, target 59.4
2021-03-14 08:30:52:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 48, chip_temp 43 ~ 59, now 201.5s, target 59.6
2021-03-14 08:30:53:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 48, chip_temp 43 ~ 59, now 202.5s, target 59.7
2021-03-14 08:30:54:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 48, chip_temp 43 ~ 59, now 203.5s, target 59.9
2021-03-14 08:30:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 48, chip_temp 43 ~ 59, now 204.5s, target 60.1
2021-03-14 08:30:56:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 48, chip_temp 43 ~ 59, now 205.5s, target 60.2
2021-03-14 08:30:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 48, chip_temp 43 ~ 59, now 206.5s, target 60.4
2021-03-14 08:30:58:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 48, chip_temp 43 ~ 59, now 207.5s, target 60.6
2021-03-14 08:30:59:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 48, chip_temp 43 ~ 59, now 208.5s, target 60.8
2021-03-14 08:31:00:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 48, chip_temp 43 ~ 59, now 209.5s, target 60.9
2021-03-14 08:31:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 49, chip_temp 43 ~ 60, now 210.5s, target 61.1
2021-03-14 08:31:02:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 49, chip_temp 43 ~ 60, now 211.5s, target 61.3
2021-03-14 08:31:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 49, chip_temp 43 ~ 60, now 212.5s, target 61.4
2021-03-14 08:31:04:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 49, chip_temp 43 ~ 60, now 213.5s, target 61.6
2021-03-14 08:31:05:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 49, chip_temp 43 ~ 60, now 214.5s, target 61.8
2021-03-14 08:31:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 49, chip_temp 43 ~ 60, now 215.5s, target 61.9
2021-03-14 08:31:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 49, chip_temp 43 ~ 60, now 216.5s, target 62.1
2021-03-14 08:31:07:frequency.c:657:inc_freq_with_fixed_vco: [9] _POSTDIV1 = 5, _POSTDIV2 = 4, USER_DIV = 1, freq = 153
2021-03-14 08:31:07:frequency.c:665:inc_freq_with_fixed_vco: set to 153M, get pcb 29 ~ 49, chip_temp 43 ~ 60
2021-03-14 08:31:07:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-03-14 08:31:07:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 153 clock_counter_limit 21, no check, skip.
2021-03-14 08:31:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 49, chip_temp 43 ~ 61, now 224.5s, target 63.4
2021-03-14 08:31:15:frequency.c:657:inc_freq_with_fixed_vco: [10] _POSTDIV1 = 6, _POSTDIV2 = 3, USER_DIV = 1, freq = 170
2021-03-14 08:31:15:frequency.c:665:inc_freq_with_fixed_vco: set to 170M, get pcb 29 ~ 49, chip_temp 43 ~ 61
2021-03-14 08:31:15:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-03-14 08:31:15:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 170 clock_counter_limit 24, no check, skip.
2021-03-14 08:31:23:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 50, chip_temp 44 ~ 62, now 232.5s, target 64.8
2021-03-14 08:31:23:frequency.c:657:inc_freq_with_fixed_vco: [11] _POSTDIV1 = 5, _POSTDIV2 = 3, USER_DIV = 1, freq = 205
2021-03-14 08:31:23:frequency.c:665:inc_freq_with_fixed_vco: set to 205M, get pcb 30 ~ 50, chip_temp 44 ~ 62
2021-03-14 08:31:23:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-03-14 08:31:23:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 205 clock_counter_limit 29, no check, skip.
2021-03-14 08:31:31:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 51, chip_temp 46 ~ 64, now 240.5s, target 66.1
2021-03-14 08:31:31:frequency.c:657:inc_freq_with_fixed_vco: [12] _POSTDIV1 = 7, _POSTDIV2 = 2, USER_DIV = 1, freq = 219
2021-03-14 08:31:31:frequency.c:665:inc_freq_with_fixed_vco: set to 219M, get pcb 30 ~ 51, chip_temp 46 ~ 64
2021-03-14 08:31:31:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-03-14 08:31:31:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 219 clock_counter_limit 32, no check, skip.
2021-03-14 08:31:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 51, chip_temp 47 ~ 64, now 248.5s, target 67.4
2021-03-14 08:31:39:frequency.c:657:inc_freq_with_fixed_vco: [13] _POSTDIV1 = 6, _POSTDIV2 = 2, USER_DIV = 1, freq = 256
2021-03-14 08:31:39:frequency.c:665:inc_freq_with_fixed_vco: set to 256M, get pcb 30 ~ 51, chip_temp 47 ~ 64
2021-03-14 08:31:39:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-03-14 08:31:39:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 256 clock_counter_limit 37, no check, skip.
2021-03-14 08:31:47:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 51, chip_temp 49 ~ 65, now 256.5s, target 68.8
2021-03-14 08:31:47:frequency.c:657:inc_freq_with_fixed_vco: [14] _POSTDIV1 = 5, _POSTDIV2 = 2, USER_DIV = 1, freq = 307
2021-03-14 08:31:47:frequency.c:665:inc_freq_with_fixed_vco: set to 307M, get pcb 30 ~ 51, chip_temp 49 ~ 65
2021-03-14 08:31:47:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-03-14 08:31:47:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 307 clock_counter_limit 46, no check, skip.
2021-03-14 08:31:50:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain  0:   d0 0.413,   d1 0.408,   d2 0.412,   d3 0.411,   sum = 1.643982
chain 0 domain  1:   d0 0.409,   d1 0.402,   d2 0.404,   d3 0.405,   sum = 1.619568
chain 0 domain  2:   d0 0.401,   d1 0.395,   d2 0.396,   d3 0.397,   sum = 1.589417
chain 0 domain  3:   d0 0.403,   d1 0.396,   d2 0.396,   d3 0.398,   sum = 1.592224
chain 0 domain  4:   d0 0.408,   d1 0.401,   d2 0.403,   d3 0.404,   sum = 1.615417
chain 0 domain  5:   d0 0.411,   d1 0.402,   d2 0.407,   d3 0.407,   sum = 1.626709
chain 0 domain  6:   d0 0.399,   d1 0.396,   d2 0.395,   d3 0.396,   sum = 1.586365
chain 0 domain  7:   d0 0.400,   d1 0.394,   d2 0.392,   d3 0.395,   sum = 1.580566
chain 0 domain  8:   d0 0.397,   d1 0.393,   d2 0.389,   d3 0.393,   sum = 1.571228
chain 0 domain  9:   d0 0.400,   d1 0.391,   d2 0.391,   d3 0.394,   sum = 1.576538
chain 0 domain 10:   d0 0.399,   d1 0.393,   d2 0.393,   d3 0.395,   sum = 1.579773
chain 0 domain 11:   d0 0.395,   d1 0.385,   d2 0.383,   d3 0.388,   sum = 1.551575
chain 0 domain 12:   d0 0.392,   d1 0.388,   d2 0.388,   d3 0.389,   sum = 1.556519
2021-03-14 08:31:50:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-03-14 08:31:56:frequency.c:623:inc_freq_with_fixed_vco: get pcb 30 ~ 51, chip_temp 51 ~ 66, now 265.2s, target 70.2
2021-03-14 08:31:56:frequency.c:657:inc_freq_with_fixed_vco: [15] _POSTDIV1 = 7, _POSTDIV2 = 1, USER_DIV = 1, freq = 439
2021-03-14 08:31:56:frequency.c:665:inc_freq_with_fixed_vco: set to 439M, get pcb 30 ~ 51, chip_temp 51 ~ 66
2021-03-14 08:31:56:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2070, step by step.
2021-03-14 08:32:01:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain  0:   d0 0.407,   d1 0.403,   d2 0.404,   d3 0.405,   sum = 1.618958
chain 0 domain  1:   d0 0.402,   d1 0.398,   d2 0.396,   d3 0.399,   sum = 1.594666
chain 0 domain  2:   d0 0.396,   d1 0.391,   d2 0.390,   d3 0.392,   sum = 1.568726
chain 0 domain  3:   d0 0.398,   d1 0.390,   d2 0.390,   d3 0.393,   sum = 1.571228
chain 0 domain  4:   d0 0.401,   d1 0.397,   d2 0.396,   d3 0.398,   sum = 1.591492
chain 0 domain  5:   d0 0.404,   d1 0.401,   d2 0.395,   d3 0.400,   sum = 1.600525
chain 0 domain  6:   d0 0.394,   d1 0.390,   d2 0.388,   d3 0.391,   sum = 1.562561
chain 0 domain  7:   d0 0.395,   d1 0.387,   d2 0.385,   d3 0.389,   sum = 1.555969
chain 0 domain  8:   d0 0.391,   d1 0.386,   d2 0.383,   d3 0.387,   sum = 1.547546
chain 0 domain  9:   d0 0.395,   d1 0.386,   d2 0.386,   d3 0.389,   sum = 1.556091
chain 0 domain 10:   d0 0.393,   d1 0.387,   d2 0.388,   d3 0.389,   sum = 1.557739
chain 0 domain 11:   d0 0.390,   d1 0.380,   d2 0.376,   d3 0.351,   sum = 1.497986
chain 0 domain 12:   d0 0.385,   d1 0.381,   d2 0.381,   d3 0.357,   sum = 1.504333
2021-03-14 08:32:01:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-03-14 08:32:01:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-03-14 08:32:01:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 439 clock_counter_limit 67, no check, skip.
2021-03-14 08:32:04:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain  0:   d0 0.404,   d1 0.400,   d2 0.400,   d3 0.401,   sum = 1.605042
chain 0 domain  1:   d0 0.402,   d1 0.395,   d2 0.396,   d3 0.397,   sum = 1.589417
chain 0 domain  2:   d0 0.394,   d1 0.389,   d2 0.390,   d3 0.391,   sum = 1.564575
chain 0 domain  3:   d0 0.397,   d1 0.389,   d2 0.390,   d3 0.392,   sum = 1.568115
chain 0 domain  4:   d0 0.401,   d1 0.395,   d2 0.397,   d3 0.397,   sum = 1.589661
chain 0 domain  5:   d0 0.403,   d1 0.396,   d2 0.395,   d3 0.398,   sum = 1.591309
chain 0 domain  6:   d0 0.394,   d1 0.390,   d2 0.388,   d3 0.390,   sum = 1.561279
chain 0 domain  7:   d0 0.395,   d1 0.388,   d2 0.388,   d3 0.390,   sum = 1.561035
chain 0 domain  8:   d0 0.392,   d1 0.387,   d2 0.386,   d3 0.388,   sum = 1.552307
chain 0 domain  9:   d0 0.395,   d1 0.386,   d2 0.387,   d3 0.389,   sum = 1.556396
chain 0 domain 10:   d0 0.394,   d1 0.388,   d2 0.390,   d3 0.390,   sum = 1.562256
chain 0 domain 11:   d0 0.389,   d1 0.379,   d2 0.377,   d3 0.352,   sum = 1.496826
chain 0 domain 12:   d0 0.385,   d1 0.381,   d2 0.381,   d3 0.352,   sum = 1.498840
2021-03-14 08:32:04:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-03-14 08:32:10:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 51, chip_temp 56 ~ 68, now 279.3s, target 72.5
2021-03-14 08:32:10:frequency.c:657:inc_freq_with_fixed_vco: [16] _POSTDIV1 = 6, _POSTDIV2 = 1, USER_DIV = 1, freq = 512
2021-03-14 08:32:10:frequency.c:665:inc_freq_with_fixed_vco: set to 512M, get pcb 29 ~ 51, chip_temp 56 ~ 68
2021-03-14 08:32:10:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 1980, step by step.
2021-03-14 08:32:17:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain  0:   d0 0.386,   d1 0.382,   d2 0.384,   d3 0.367,   sum = 1.519165
chain 0 domain  1:   d0 0.384,   d1 0.379,   d2 0.379,   d3 0.360,   sum = 1.502014
chain 0 domain  2:   d0 0.378,   d1 0.373,   d2 0.374,   d3 0.368,   sum = 1.491882
chain 0 domain  3:   d0 0.380,   d1 0.374,   d2 0.374,   d3 0.364,   sum = 1.491943
chain 0 domain  4:   d0 0.384,   d1 0.378,   d2 0.380,   d3 0.355,   sum = 1.496948
chain 0 domain  5:   d0 0.386,   d1 0.378,   d2 0.380,   d3 0.353,   sum = 1.496826
chain 0 domain  6:   d0 0.376,   d1 0.372,   d2 0.373,   d3 0.369,   sum = 1.490295
chain 0 domain  7:   d0 0.378,   d1 0.371,   d2 0.372,   d3 0.368,   sum = 1.489624
chain 0 domain  8:   d0 0.375,   d1 0.370,   d2 0.369,   d3 0.370,   sum = 1.484070
chain 0 domain  9:   d0 0.377,   d1 0.371,   d2 0.370,   d3 0.369,   sum = 1.487732
chain 0 domain 10:   d0 0.377,   d1 0.373,   d2 0.373,   d3 0.368,   sum = 1.490295
chain 0 domain 11:   d0 0.372,   d1 0.363,   d2 0.361,   d3 0.362,   sum = 1.458618
chain 0 domain 12:   d0 0.367,   d1 0.364,   d2 0.364,   d3 0.365,   sum = 1.459534
2021-03-14 08:32:17:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-03-14 08:32:17:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-03-14 08:32:17:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 512 clock_counter_limit 78, no check, skip.
2021-03-14 08:32:19:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain  0:   d0 0.385,   d1 0.382,   d2 0.382,   d3 0.367,   sum = 1.515747
chain 0 domain  1:   d0 0.384,   d1 0.377,   d2 0.379,   d3 0.356,   sum = 1.496704
chain 0 domain  2:   d0 0.377,   d1 0.372,   d2 0.373,   d3 0.369,   sum = 1.491211
chain 0 domain  3:   d0 0.380,   d1 0.372,   d2 0.374,   d3 0.366,   sum = 1.492126
chain 0 domain  4:   d0 0.383,   d1 0.380,   d2 0.379,   d3 0.355,   sum = 1.496521
chain 0 domain  5:   d0 0.385,   d1 0.378,   d2 0.379,   d3 0.355,   sum = 1.496582
chain 0 domain  6:   d0 0.376,   d1 0.372,   d2 0.372,   d3 0.370,   sum = 1.490540
chain 0 domain  7:   d0 0.378,   d1 0.372,   d2 0.372,   d3 0.368,   sum = 1.490356
chain 0 domain  8:   d0 0.375,   d1 0.371,   d2 0.370,   d3 0.370,   sum = 1.485413
chain 0 domain  9:   d0 0.377,   d1 0.369,   d2 0.372,   d3 0.370,   sum = 1.487366
chain 0 domain 10:   d0 0.377,   d1 0.372,   d2 0.374,   d3 0.368,   sum = 1.490723
chain 0 domain 11:   d0 0.371,   d1 0.363,   d2 0.362,   d3 0.362,   sum = 1.457458
chain 0 domain 12:   d0 0.367,   d1 0.363,   d2 0.364,   d3 0.365,   sum = 1.458801
2021-03-14 08:32:20:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-03-14 08:32:26:frequency.c:623:inc_freq_with_fixed_vco: get pcb 29 ~ 49, chip_temp 57 ~ 66, now 295.1s, target 75.2
2021-03-14 08:32:26:frequency.c:657:inc_freq_with_fixed_vco: [17] _POSTDIV1 = 5, _POSTDIV2 = 1, USER_DIV = 1, freq = 615
2021-03-14 08:32:26:frequency.c:665:inc_freq_with_fixed_vco: set to 615M, get pcb 29 ~ 49, chip_temp 57 ~ 66
2021-03-14 08:32:26:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 1910, step by step.
2021-03-14 08:32:33:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain  0:   d0 0.371,   d1 0.368,   d2 0.370,   d3 0.367,   sum = 1.476318
chain 0 domain  1:   d0 0.371,   d1 0.365,   d2 0.365,   d3 0.367,   sum = 1.467102
chain 0 domain  2:   d0 0.363,   d1 0.360,   d2 0.361,   d3 0.362,   sum = 1.445557
chain 0 domain  3:   d0 0.366,   d1 0.360,   d2 0.361,   d3 0.363,   sum = 1.450439
chain 0 domain  4:   d0 0.370,   d1 0.366,   d2 0.365,   d3 0.367,   sum = 1.468201
chain 0 domain  5:   d0 0.371,   d1 0.366,   d2 0.365,   d3 0.366,   sum = 1.468689
chain 0 domain  6:   d0 0.363,   d1 0.360,   d2 0.360,   d3 0.359,   sum = 1.442444
chain 0 domain  7:   d0 0.365,   d1 0.359,   d2 0.359,   d3 0.359,   sum = 1.442322
chain 0 domain  8:   d0 0.361,   d1 0.357,   d2 0.356,   d3 0.358,   sum = 1.432434
chain 0 domain  9:   d0 0.364,   d1 0.356,   d2 0.359,   d3 0.360,   sum = 1.438660
chain 0 domain 10:   d0 0.364,   d1 0.359,   d2 0.360,   d3 0.360,   sum = 1.443237
chain 0 domain 11:   d0 0.359,   d1 0.351,   d2 0.347,   d3 0.349,   sum = 1.406921
chain 0 domain 12:   d0 0.353,   d1 0.351,   d2 0.350,   d3 0.351,   sum = 1.405457
2021-03-14 08:32:33:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-03-14 08:32:33:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0
2021-03-14 08:32:33:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 615 clock_counter_limit 95, no check, skip.
2021-03-14 08:32:35:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 0 with 0 regs timeout.
chain 0 domain  0:   d0 0.370,   d1 0.367,   d2 0.367,   d3 0.368,   sum = 1.473145
chain 0 domain  1:   d0 0.369,   d1 0.364,   d2 0.365,   d3 0.364,   sum = 1.462463
chain 0 domain  2:   d0 0.363,   d1 0.360,   d2 0.359,   d3 0.360,   sum = 1.442383
chain 0 domain  3:   d0 0.366,   d1 0.360,   d2 0.360,   d3 0.361,   sum = 1.446838
chain 0 domain  4:   d0 0.369,   d1 0.365,   d2 0.366,   d3 0.364,   sum = 1.464722
chain 0 domain  5:   d0 0.370,   d1 0.364,   d2 0.365,   d3 0.365,   sum = 1.465088
chain 0 domain  6:   d0 0.363,   d1 0.359,   d2 0.359,   d3 0.359,   sum = 1.440674
chain 0 domain  7:   d0 0.365,   d1 0.359,   d2 0.359,   d3 0.359,   sum = 1.441711
chain 0 domain  8:   d0 0.361,   d1 0.358,   d2 0.357,   d3 0.357,   sum = 1.433594
chain 0 domain  9:   d0 0.363,   d1 0.357,   d2 0.358,   d3 0.358,   sum = 1.436523
chain 0 domain 10:   d0 0.364,   d1 0.359,   d2 0.360,   d3 0.359,   sum = 1.442261
chain 0 domain 11:   d0 0.358,   d1 0.349,   d2 0.350,   d3 0.345,   sum = 1.402588
chain 0 domain 12:   d0 0.353,   d1 0.350,   d2 0.351,   d3 0.351,   sum = 1.404968
2021-03-14 08:32:35:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core)
2021-03-14 08:32:35:driver-btm-api.c:666:set_timeout: freq = 615, percent = 90, hcn = 707788, timeout = 1150
2021-03-14 08:32:35:power_api.c:353:set_to_working_voltage_by_steps: Set to voltage raw 1840, step by step.
2021-03-14 08:32:42:thread.c:1533:create_check_system_status_thread: create thread
2021-03-14 08:32:42:thread.c:1508:create_asic_status_monitor_thread: create thread
2021-03-14 08:32:42:driver-btm-api.c:2599:bitmain_soc_init: Init done!
2021-03-14 08:32:47:driver-btm-api.c:247:set_miner_status: STATUS_OKAY
2021-03-14 08:32:48:frequency.c:107:get_ideal_hash_rate_GH: ideal_hash_rate = 18328
2021-03-14 08:32:48:frequency.c:128:get_sale_hash_rate_GH: sale_hash_rate = 16000
2021-03-14 08:32:51:driver-btm-api.c:1634:dhash_chip_send_job: Version num 8
2021-03-14 08:32:51:driver-btm-api.c:1778:dhash_chip_send_job: stime.tv_sec 1615710771, block_ntime 1615710769

2021-03-13 08:57:02:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 195672K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 33704K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 20664K (cc6d2000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 13/6, WL threshold: 4096, image sequence number: 3745532542
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 3E2BC2EA-ECA1-4E91-BF05-322AFDAF11A7, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 5846/4013, WL threshold: 4096, image sequence number: 614900815
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 91DF6B3D-1A99-4241-87C7-EB25097110C1, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb54000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
2021-03-13 08:55:16:thread.c:1555:create_bitmain_soc_init_thread: create thread
2021-03-13 08:55:16:driver-btm-api.c:682:init_freq_mode: This is scan-user version
2021-03-13 08:55:16:driver-btm-api.c:2518:bitmain_soc_init: Miner compile time: Thu Oct 22 07:35:06 CST 2020 type: Antminer T17e
2021-03-13 08:55:16:driver-btm-api.c:2519:bitmain_soc_init: commit version: 037ddcd 2020-10-21 22:42:21, build by: jenkins 2020-10-22 07:39:39
2021-03-13 08:55:16:driver-btm-api.c:2520:bitmain_soc_init: opt_multi_version     = 1
2021-03-13 08:55:16:driver-btm-api.c:2521:bitmain_soc_init: opt_bitmain_ab        = 1
2021-03-13 08:55:16:driver-btm-api.c:2522:bitmain_soc_init: mid_auto_gen          = 0
2021-03-13 08:55:16:driver-btm-api.c:2523:bitmain_soc_init: work_mode             = 0
2021-03-13 08:55:16:driver-btm-api.c:2524:bitmain_soc_init: power_feedback_en     = true
2021-03-13 08:55:16:driver-btm-api.c:2067:show_sn: no SN got, please write SN to /config/sn
2021-03-13 08:55:16:driver-btm-api.c:1384:miner_device_init: Detect 256MB control board of XILINX
2021-03-13 08:55:16:driver-btm-api.c:1325:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2021-03-13 08:55:22:driver-btm-api.c:1309:init_miner_version: miner ID : 81280c042b10481c
2021-03-13 08:55:22:driver-btm-api.c:1315:init_miner_version: FPGA Version = 0xB023
2021-03-13 08:55:23:auto_adapt.c:100:_get_board_info: chain[2] board bin: 1, chip bin: 1, chip ft: A4V4, chip version: AB
2021-03-13 08:55:23:driver-btm-api.c:2164:get_calibration_voltage: calibration voltage flag is error data.
2021-03-13 08:55:23 voltage[2] = 1840
2021-03-13 08:55:23:auto_adapt.c:273:is_sweep_failed_before: open sweep tag failed
voltage_ref = 1840
2100  2100  2100  2100  2100  
2100  2100  2100  2100  2100  
2100  2100  2100  2100  2100  
2100  2100  2100  2100  2100  
2100  2100  2100  2100  2070  
2070  2060  2060  2050  2020  
2020  2010  2010  2000  1980  
1980  1970  1960  1950  1910  
1980  1970  1960  1950  1910  

2021-03-13 08:55:23:thread.c:1523:create_read_nonce_reg_thread: create thread
2021-03-13 08:55:23:driver-btm-api.c:698:dump_pcb_bom_version: Chain [2] PCB Version: 0x010a
2021-03-13 08:55:23:driver-btm-api.c:699:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2021-03-13 08:55:30:driver-btm-api.c:2344:bitmain_board_init: Fan check passed.
2021-03-13 08:55:31:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-03-13 08:55:33:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2021-03-13 08:55:33:thread.c:1518:create_pic_heart_beat_thread: create thread
2021-03-13 08:55:35:power_api.c:241:power_init: power type version: 0x0042
2021-03-13 08:55:36:power_api.c:259:power_init: Power init:
2021-03-13 08:55:36:power_api.c:260:power_init: current_voltage_raw     = 2136
2021-03-13 08:55:36:power_api.c:261:power_init: highest_voltage_raw     = 2000
2021-03-13 08:55:36:power_api.c:262:power_init: working_voltage_raw     = 1800
2021-03-13 08:55:36:power_api.c:263:power_init: higher_voltage_raw      = 1850
2021-03-13 08:55:36:power_api.c:264:power_init: check_asic_voltage_raw  = 1800
2021-03-13 08:55:36:driver-btm-api.c:2354:bitmain_board_init: Enter 60s sleep to make sure power release finish.
2021-03-13 08:56:38:driver-btm-api.c:1123:check_asic_number_until_volt_balance: THIS is No.1 time boost asic:
2021-03-13 08:56:38:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw  = 1800
2021-03-13 08:56:41:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
2021-03-13 08:56:58:uart.c:69:set_baud: set UART baud to 115200
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-03-13 08:57:02:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
2021-03-13 08:57:03:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-03-13 08:57:05:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2021-03-13 08:57:05:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw  = 1900
2021-03-13 08:57:05:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1900, step by step.
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-03-13 08:57:17:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
2021-03-13 08:57:19:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-03-13 08:57:21:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2021-03-13 08:57:21:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw  = 2000
2021-03-13 08:57:21:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step.
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-03-13 08:57:33:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
2021-03-13 08:57:35:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-03-13 08:57:37:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2021-03-13 08:57:37:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw  = 2100
2021-03-13 08:57:37:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step.
chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777
2021-03-13 08:57:49:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 3
2021-03-13 08:57:50:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2021-03-13 08:57:52:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2021-03-13 08:57:52:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw  = 1800
2021-03-13 08:57:52:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step.
2021-03-13 08:58:08:driver-btm-api.c:1217:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
2021-03-13 08:58:09:driver-btm-api.c:247:set_miner_status: ERROR_SOC_INIT
2021-03-13 08:58:09:driver-btm-api.c:176:stop_mining: stop mining: soc init failed!
2021-03-13 08:58:09:thread.c:1595:cancel_read_nonce_reg_thread: cancel thread
2021-03-13 08:58:09:driver-btm-api.c:147:killall_hashboard: ****power off hashboard****