Yeah, full power off. Wait 30 seconds and power on.
If chain #9 starts showing the odd numbers again, I would contact the developer of the firmware or revert to stock.
Since we can't really know what the custom firmware is doing having you post a log will probably not help much in figuring it out.
It becomes a bit more guesswork then looking at the Bitmain logs which everyone who has worked on them over the years more or less knows.
-Dave
Topic: Antminer T9+ , 36038 TH Error (Read 153 times)
He's probably asking if you have tried turning on and off the device to fix the issue. Sidenote: Is the problem that the realtime hashrate is too high? I haven't really looked into miners much so I couldn't see the problem myself.
Which firmware is that? It's not stock.
Either way, look down to chain 9. Something it's not right.
Does a power cycle clear it?
-Dave
Either way, look down to chain 9. Something it's not right.
Does a power cycle clear it?
-Dave
Hi Dave
Its customs firmware, but i have other T9+ with this firmware and works perfectly
What do you mean with... a power cycle clear it?
Which firmware is that? It's not stock.
Either way, look down to chain 9. Something it's not right.
Does a power cycle clear it?
-Dave
Either way, look down to chain 9. Something it's not right.
Does a power cycle clear it?
-Dave
Hi Guys
Do you know how solve this issue ? temps & chips are ok
https://imgup.cz/images/2019/08/28/AntT9Error.png
Do you know how solve this issue ? temps & chips are ok
https://imgup.cz/images/2019/08/28/AntT9Error.png
Jump to: