Topic: Antminer T9+ problem-hash rate drops (Read 514 times)
complete junk i have 2 t9+ 2 blades doa 2 blades down so 60% defective after just a weeks use i have 2400 watt psus thats not the issue its winter the room temp is also not the issue ive tried multiple firmware updates . both from the web ui and from the sd slot . the log shows them failing regardless no mater what combination of blades or wires or power of firmware . just complete junk
It is hard to notice in the photos but in the 3rd picture. It is the 3rd row of heatsinks from the bottom 2nd heatsink in from the left.
Yeah I will be going that route as well. Unfortunately though if you are Canadian, you can not make use of their American warranty repair.
Either way nothing I can do until I get the unit sent away, which should be next week.
Yeah I will be going that route as well. Unfortunately though if you are Canadian, you can not make use of their American warranty repair.
Either way nothing I can do until I get the unit sent away, which should be next week.
Umm, there is nothing visually wrong with that hash board. I would need to see the chip chains (little transistors), I suspect one of them is burnt out or about to fall off.
From the images, I see no scorch marks in the pics.
I sent mine to Ant Creek in Washington to be serviced. Not taking the risk. For others information though, I did try to replace the controller and all the ribbons - no luck.
Personally, I think the power plug broke because it was a bad weld or something that is my guess. As it heated up it expanded and caused a crack. I bet it is something simple like that, that I could have repaired. I used the 180 Day warranty instead of taking the chance.
From the images, I see no scorch marks in the pics.
I sent mine to Ant Creek in Washington to be serviced. Not taking the risk. For others information though, I did try to replace the controller and all the ribbons - no luck.
Personally, I think the power plug broke because it was a bad weld or something that is my guess. As it heated up it expanded and caused a crack. I bet it is something simple like that, that I could have repaired. I used the 180 Day warranty instead of taking the chance.
I finally got around to opening up the machine. Once I figured out the trouble board I opened things up. Pretty simple I just unplugged the fan and disconnected the hashboard. It slid right out and it was easy to notice the scorching on one of the heatsinks. Just emailed Bitmain with my findings, waiting to see what's next.
Here's a few photos.
https://imgur.com/3PnBp1Z
https://imgur.com/9K0GpTC
https://imgur.com/RDWGzY4
https://imgur.com/SBDqEI2
Here's a few photos.
https://imgur.com/3PnBp1Z
https://imgur.com/9K0GpTC
https://imgur.com/RDWGzY4
https://imgur.com/SBDqEI2
Im having a similar issues but mine only drops about 300 gh.
I did a strait kernel log comparison in NP++ and found this:
Im gonna swap PSUs around and try a few other things, but it just looks like a crap hash board.
I did a strait kernel log comparison in NP++ and found this:
Code:
Test Patten on chain[1]: FAILED!
chain[2]: some chip cores are not opened FAILED!
Test Patten on chain[2]: FAILED!
chain[3]: All chip cores are opened OK!
Test Patten on chain[3]: OK!
chain[8]: All chip cores are opened OK!
Test Patten on chain[8]: OK!
chain[9]: All chip cores are opened OK!
Test Patten on chain[9]: OK!
chain[10]: All chip cores are opened OK!
Test Patten on chain[10]: OK!
chain[11]: All chip cores are opened OK!
Test Patten on chain[11]: OK!
chain[12]: All chip cores are opened OK!
Test Patten on chain[12]: OK!
chain[13]: All chip cores are opened OK!
Test Patten on chain[13]: FAILED!
chain[2]: some chip cores are not opened FAILED!
Test Patten on chain[2]: FAILED!
chain[3]: All chip cores are opened OK!
Test Patten on chain[3]: OK!
chain[8]: All chip cores are opened OK!
Test Patten on chain[8]: OK!
chain[9]: All chip cores are opened OK!
Test Patten on chain[9]: OK!
chain[10]: All chip cores are opened OK!
Test Patten on chain[10]: OK!
chain[11]: All chip cores are opened OK!
Test Patten on chain[11]: OK!
chain[12]: All chip cores are opened OK!
Test Patten on chain[12]: OK!
chain[13]: All chip cores are opened OK!
Test Patten on chain[13]: FAILED!
Im gonna swap PSUs around and try a few other things, but it just looks like a crap hash board.
So after some back and forth with Bitmain I have been given permission to open up the miner without voiding my warranty. I don't have the photos or anything yet, but I will document the troubleshooting and eventual solve of this issue hopefully. I will edit this post once done with a link to that thread.
Short story is it's likely a hardware issue.
Short story is it's likely a hardware issue.
Yeah, Hate to say it. I'm disappointed. I bought 3 T9+'s they were running great then 1 of them decided to go flaky and sometimes 0.0000 GHs. I contacted Bitmain they said that it was possibly a fan. I replaced it. Then about 2 days later Chain 2 goes out.
It's a hit or miss. The other 2 are working great no problems, but looks like in my case 33% of them are bad.
I'm going to try to replace the controller and ribbons just to see if that is the problem. If it is not, off to CA it goes to get replaced or repaired. Literally, the T9+ was 1 week old when received.
It's a hit or miss. The other 2 are working great no problems, but looks like in my case 33% of them are bad.
I'm going to try to replace the controller and ribbons just to see if that is the problem. If it is not, off to CA it goes to get replaced or repaired. Literally, the T9+ was 1 week old when received.
Hello,
When I run T9+ it works fine several hours, after that hash rate on one chain drops to 96 aproximatly, only work 2 chips. Then I reboot the device and it works fine for several hours and then again hash rate drops on the same chain. I will post kernal log. On miner status all chips are showing "o", temperatures are max 78 C. I flashed firmware and its the same. Also two chips on other chain hashing 0. Does anyone knows what is causing the problem?
When I run T9+ it works fine several hours, after that hash rate on one chain drops to 96 aproximatly, only work 2 chips. Then I reboot the device and it works fine for several hours and then again hash rate drops on the same chain. I will post kernal log. On miner status all chips are showing "o", temperatures are max 78 C. I flashed firmware and its the same. Also two chips on other chain hashing 0. Does anyone knows what is causing the problem?
OP did you resolve this issue? I've been having the same issue since setting mine up a few days ago.
My PSU is sound, it's 2400W, on 220V line.
As you can see chain 13 seems to drop out. I have done a reboot each night/morning around my work schedule and it looks like it drops off after about 6 hours. When I review the kernel I do see on chain 13 that the first ASIC only reads ~6 whereas the rest read ~62.
I haven't had a ton of time to troubleshoot the issue yet but thought I'd see what you came up with. Just glad this machine was only around 50$/TH (with the issue more like 60).
Crappy picture I know was a little rushed on my way to work
Code:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000316] ps7-ttc #0 at df804000, irq=43
[ 0.000632] Console: colour dummy device 80x30
[ 0.000663] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040211] pid_max: default: 32768 minimum: 301
[ 0.040438] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040459] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042616] CPU: Testing write buffer coherency: ok
[ 0.042966] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043027] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043253] L310 cache controller enabled
[ 0.043273] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121046] CPU1: Booted secondary processor
[ 0.210232] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210367] Brought up 2 CPUs
[ 0.210386] SMP: Total of 2 processors activated.
[ 0.210395] CPU: All CPU(s) started in SVC mode.
[ 0.211092] devtmpfs: initialized
[ 0.213501] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214761] regulator-dummy: no parameters
[ 0.223333] NET: Registered protocol family 16
[ 0.225653] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.227981] cpuidle: using governor ladder
[ 0.227994] cpuidle: using governor menu
[ 0.235507] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237065] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237079] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237200] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.259708] bio: create slab at 0
[ 0.261628] vgaarb: loaded
[ 0.262369] SCSI subsystem initialized
[ 0.263259] usbcore: registered new interface driver usbfs
[ 0.263432] usbcore: registered new interface driver hub
[ 0.263663] usbcore: registered new device driver usb
[ 0.264192] media: Linux media interface: v0.10
[ 0.264349] Linux video capture interface: v2.00
[ 0.264590] pps_core: LinuxPPS API ver. 1 registered
[ 0.264601] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.264727] PTP clock support registered
[ 0.265100] EDAC MC: Ver: 3.0.0
[ 0.266157] Advanced Linux Sound Architecture Driver Initialized.
[ 0.269153] DMA-API: preallocated 4096 debug entries
[ 0.269169] DMA-API: debugging enabled by kernel config
[ 0.269262] Switched to clocksource arm_global_timer
[ 0.290311] NET: Registered protocol family 2
[ 0.290995] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.291054] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.291140] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.291187] TCP: reno registered
[ 0.291206] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291241] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291490] NET: Registered protocol family 1
[ 0.291857] RPC: Registered named UNIX socket transport module.
[ 0.291869] RPC: Registered udp transport module.
[ 0.291877] RPC: Registered tcp transport module.
[ 0.291886] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.291899] PCI: CLS 0 bytes, default 64
[ 0.292355] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.294430] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.296647] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.296848] msgmni has been set to 967
[ 0.297655] io scheduler noop registered
[ 0.297669] io scheduler deadline registered
[ 0.297712] io scheduler cfq registered (default)
[ 0.309483] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.309502] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.435174] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.003146] console [ttyPS0] enabled
[ 1.007443] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.015103] [drm] Initialized drm 1.1.0 20060810
[ 1.032384] brd: module loaded
[ 1.041828] loop: module loaded
[ 1.051792] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.057543] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.065667] libphy: XEMACPS mii bus: probed
[ 1.070113] ------------- phy_id = 0x3625e62
[ 1.074891] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.083605] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.090368] ehci-pci: EHCI PCI platform driver
[ 1.097588] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.104435] usbcore: registered new interface driver usb-storage
[ 1.111328] mousedev: PS/2 mouse device common for all mice
[ 1.117439] i2c /dev entries driver
[ 1.124430] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.130009] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.135907] Xilinx Zynq CpuIdle Driver started
[ 1.140787] sdhci: Secure Digital Host Controller Interface driver
[ 1.146877] sdhci: Copyright(c) Pierre Ossman
[ 1.151293] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.158039] mmc0: no vqmmc regulator found
[ 1.162083] mmc0: no vmmc regulator found
[ 1.199280] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.207973] usbcore: registered new interface driver usbhid
[ 1.213489] usbhid: USB HID core driver
[ 1.218211] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.224508] nand: Micron MT29F2G08ABAEAWP
[ 1.228473] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.234412] Bad block table found at page 131008, version 0x01
[ 1.240633] Bad block table found at page 130944, version 0x01
[ 1.246683] 3 ofpart partitions found on MTD device pl353-nand
[ 1.252465] Creating 3 MTD partitions on "pl353-nand":
[ 1.257554] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.265633] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.272965] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.281981] TCP: cubic registered
[ 1.285215] NET: Registered protocol family 17
[ 1.289937] Registering SWP/SWPB emulation handler
[ 1.295871] regulator-dummy: disabling
[ 1.300261] UBI: attaching mtd1 to ubi0
[ 1.826469] UBI: scanning is finished
[ 1.838128] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.845204] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.851966] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.858631] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.865509] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.871489] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.878596] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 248547359
[ 1.887552] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.896770] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.896775] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.900851] ALSA device list:
[ 1.900855] No soundcards found.
[ 1.917215] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.981422] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.987352] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.996500] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.006376] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.011411] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D5E65D66-FDFF-460C-B3DB-A1F2DEB908D8, small LPT model
[ 2.022965] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.030394] devtmpfs: mounted
[ 2.033499] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.883523] random: dd urandom read with 0 bits of entropy available
[ 3.279306]
[ 3.279306] bcm54xx_config_init
[ 3.889310]
[ 3.889310] bcm54xx_config_init
[ 6.890130] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 6.896221] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 23.620313] In axi fpga driver!
[ 23.623388] request_mem_region OK!
[ 23.626779] AXI fpga dev virtual address is 0xdf9fc000
[ 23.631915] *base_vir_addr = 0xc510
[ 23.647603] In fpga mem driver!
[ 23.650735] request_mem_region OK!
[ 23.654241] fpga mem virtual address is 0xe2000000
[ 24.448681]
[ 24.448681] bcm54xx_config_init
[ 25.078651]
[ 25.078651] bcm54xx_config_init
[ 28.079357] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 28.085380] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 477.112344] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=8000c510
miner ID : 80148d0c6880881c
Miner Type = T9+
AsicType = 1387
real AsicNum = 18
use critical mode to search freq...
get PLUG ON=0x07003f0e
Find hashboard on Chain[1]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
Find hashboard on Chain[8]
Find hashboard on Chain[9]
Find hashboard on Chain[10]
Find hashboard on Chain[11]
Find hashboard on Chain[12]
Find hashboard on Chain[13]
set_reset_allhashboard = 0x0000ffff
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x90
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x90
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x02 0x00 0x11 0x10 0x11 0x11 0x10 0x02 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x01 0x11 0x20 0x00 0x11 0x11 0x01 0x11 0x31 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x11 0x12 0x20 0x10 0x11 0x10 0x42 0x18 0x21 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[1] has freq in PIC and will jump over...
Chain[1] has core num in PIC
Chain[1] ASIC[3] has core num=2
Chain[1] ASIC[6] has core num=1
Chain[1] ASIC[7] has core num=1
Chain[1] ASIC[8] has core num=1
Chain[1] ASIC[10] has core num=1
Chain[1] ASIC[11] has core num=1
Chain[1] ASIC[12] has core num=1
Chain[1] ASIC[13] has core num=1
Chain[1] ASIC[14] has core num=1
Chain[1] ASIC[17] has core num=2
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[2] has freq in PIC and will jump over...
Chain[2] has core num in PIC
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x20 0x11 0x21 0x10 0x21 0x13 0x20 0x92 0x10 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x21 0x11 0x00 0x11 0x01 0x21 0x10 0x13 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x01 0x11 0x11 0x10 0xa0 0x20 0x21 0x11 0x04 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[3] has freq in PIC and will jump over...
Chain[3] has core num in PIC
Chain[3] ASIC[0] has core num=2
Chain[3] ASIC[2] has core num=1
Chain[3] ASIC[3] has core num=1
Chain[3] ASIC[4] has core num=2
Chain[3] ASIC[5] has core num=1
Chain[3] ASIC[6] has core num=1
Chain[3] ASIC[8] has core num=2
Chain[3] ASIC[9] has core num=1
Chain[3] ASIC[10] has core num=1
Chain[3] ASIC[11] has core num=3
Chain[3] ASIC[12] has core num=2
Chain[3] ASIC[14] has core num=9
Chain[3] ASIC[15] has core num=2
Chain[3] ASIC[16] has core num=1
has freq in PIC, will disable freq setting.
chain[8] has freq in PIC and will jump over...
Chain[8] has core num in PIC
Chain[8] ASIC[1] has core num=1
Chain[8] ASIC[2] has core num=1
Chain[8] ASIC[3] has core num=1
Chain[8] ASIC[4] has core num=2
Chain[8] ASIC[8] has core num=1
Chain[8] ASIC[9] has core num=1
Chain[8] ASIC[10] has core num=1
Chain[8] ASIC[11] has core num=1
Chain[8] ASIC[13] has core num=1
Chain[8] ASIC[14] has core num=1
Chain[8] ASIC[15] has core num=1
Chain[8] ASIC[16] has core num=3
Chain[8] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[9] has freq in PIC and will jump over...
Chain[9] has core num in PIC
Chain[9] ASIC[0] has core num=1
Chain[9] ASIC[1] has core num=1
Chain[9] ASIC[2] has core num=1
Chain[9] ASIC[3] has core num=2
Chain[9] ASIC[4] has core num=2
Chain[9] ASIC[6] has core num=1
Chain[9] ASIC[8] has core num=1
Chain[9] ASIC[9] has core num=1
Chain[9] ASIC[10] has core num=1
Chain[9] ASIC[12] has core num=4
Chain[9] ASIC[13] has core num=2
Chain[9] ASIC[14] has core num=1
Chain[9] ASIC[15] has core num=8
Chain[9] ASIC[16] has core num=2
Chain[9] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[10] has freq in PIC and will jump over...
Chain[10] has core num in PIC
Chain[10] ASIC[12] has core num=1
has freq in PIC, will disable freq setting.
chain[11] has freq in PIC and will jump over...
Chain[11] has core num in PIC
has freq in PIC, will disable freq setting.
chain[12] has freq in PIC and will jump over...
Chain[12] has core num in PIC
Chain[12] ASIC[0] has core num=1
Chain[12] ASIC[1] has core num=1
Chain[12] ASIC[2] has core num=2
Chain[12] ASIC[3] has core num=1
Chain[12] ASIC[4] has core num=1
Chain[12] ASIC[5] has core num=1
Chain[12] ASIC[8] has core num=1
Chain[12] ASIC[9] has core num=1
Chain[12] ASIC[11] has core num=1
Chain[12] ASIC[12] has core num=2
Chain[12] ASIC[13] has core num=1
Chain[12] ASIC[14] has core num=1
Chain[12] ASIC[16] has core num=1
Chain[12] ASIC[17] has core num=3
has freq in PIC, will disable freq setting.
chain[13] has freq in PIC and will jump over...
Chain[13] has core num in PIC
Chain[13] ASIC[1] has core num=1
Chain[13] ASIC[2] has core num=1
Chain[13] ASIC[3] has core num=1
Chain[13] ASIC[4] has core num=1
Chain[13] ASIC[5] has core num=1
Chain[13] ASIC[6] has core num=1
Chain[13] ASIC[8] has core num=10
Chain[13] ASIC[10] has core num=2
Chain[13] ASIC[12] has core num=2
Chain[13] ASIC[13] has core num=1
Chain[13] ASIC[14] has core num=1
Chain[13] ASIC[15] has core num=1
Chain[13] ASIC[17] has core num=4
get PIC voltage=11 on chain[1], value=870
get PIC voltage=11 on chain[2], value=870
get PIC voltage=11 on chain[3], value=870
get PIC voltage=11 on chain[8], value=870
get PIC voltage=11 on chain[9], value=870
get PIC voltage=11 on chain[10], value=870
get PIC voltage=11 on chain[11], value=870
get PIC voltage=11 on chain[12], value=870
get PIC voltage=11 on chain[13], value=870
set_reset_allhashboard = 0x00000000
chain[8] temp offset record: 1,0,0,0,0,0,40,28
chain[8] temp chip I2C addr=0x98
chain[10] temp offset record: 1,0,0,0,0,0,40,28
chain[10] temp chip I2C addr=0x98
chain[12] temp offset record: -1,-1,-1,-1,-1,-1,-1,-1
chain[12] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 9, total chain num = 9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1403 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = T9+
Miner compile time: Fri Nov 17 18:17:49 CST 2017 type: Antminer T9+set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 80148d0c6880881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[5] speed=6120
get fan[2] speed=6120
get fan[5] speed=6120
get fan[2] speed=6120
get fan[5] speed=6120
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x90
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x02 0x00 0x11 0x10 0x11 0x11 0x10 0x02 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x01 0x11 0x20 0x00 0x11 0x11 0x01 0x11 0x31 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x11 0x12 0x20 0x10 0x11 0x10 0x42 0x18 0x21 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J2] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J2] test patten OK temp=-1
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x90
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J3] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J3] test patten OK temp=-1
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x20 0x11 0x21 0x10 0x21 0x13 0x20 0x92 0x10 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x21 0x11 0x00 0x11 0x01 0x21 0x10 0x13 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x01 0x11 0x11 0x10 0xa0 0x20 0x21 0x11 0x04 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J4] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J4] test patten OK temp=-1
Chain[J9] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J9] test patten OK temp=-1
Chain[J10] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J10] test patten OK temp=-1
Chain[J11] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J11] test patten OK temp=-1
Chain[J12] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J12] test patten OK temp=-1
Chain[J13] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J13] test patten OK temp=-1
Chain[J14] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J14] test patten OK temp=-1
Chain[J2] will use voltage=930 [1] to open core
Chain[J3] will use voltage=930 [1] to open core
Chain[J4] will use voltage=930 [1] to open core
Chain[J9] will use voltage=930 [1] to open core
Chain[J10] will use voltage=930 [1] to open core
Chain[J11] will use voltage=930 [1] to open core
Chain[J12] will use voltage=930 [1] to open core
Chain[J13] will use voltage=930 [1] to open core
Chain[J14] will use voltage=930 [1] to open core
Chain[J2] orignal chain_voltage_pic=11 value=870
Chain[J3] orignal chain_voltage_pic=11 value=870
Chain[J4] orignal chain_voltage_pic=11 value=870
Chain[J9] orignal chain_voltage_pic=1 value=930
Chain[J9] will use backup chain_voltage_pic=870 [11]
Chain[J9] get working chain_voltage_pic=11
Chain[J10] orignal chain_voltage_pic=1 value=930
Chain[J10] will use backup chain_voltage_pic=870 [11]
Chain[J10] get working chain_voltage_pic=11
Chain[J11] orignal chain_voltage_pic=1 value=930
Chain[J11] will use backup chain_voltage_pic=870 [11]
Chain[J11] get working chain_voltage_pic=11
Chain[J12] orignal chain_voltage_pic=1 value=930
Chain[J12] will use backup chain_voltage_pic=870 [11]
Chain[J12] get working chain_voltage_pic=11
Chain[J13] orignal chain_voltage_pic=1 value=930
Chain[J13] will use backup chain_voltage_pic=870 [11]
Chain[J13] get working chain_voltage_pic=11
Chain[J14] orignal chain_voltage_pic=1 value=930
Chain[J14] will use backup chain_voltage_pic=870 [11]
Chain[J14] get working chain_voltage_pic=11
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 1 time
Chain[J2] has 18 asic
Chain[J3] has 18 asic
Chain[J4] has 18 asic
Chain[J9] has 18 asic
Chain[J10] has 18 asic
Chain[J11] has 18 asic
Chain[J12] has 18 asic
Chain[J13] has 18 asic
Chain[J14] has 18 asic
Chain[J2] has core num in PIC
Chain[J2] ASIC[3] has core num=2
Chain[J2] ASIC[6] has core num=1
Chain[J2] ASIC[7] has core num=1
Chain[J2] ASIC[8] has core num=1
Chain[J2] ASIC[10] has core num=1
Chain[J2] ASIC[11] has core num=1
Chain[J2] ASIC[12] has core num=1
Chain[J2] ASIC[13] has core num=1
Chain[J2] ASIC[14] has core num=1
Chain[J2] ASIC[17] has core num=2
Chain[J3] has core num in PIC
Chain[J4] has core num in PIC
Chain[J4] ASIC[0] has core num=2
Chain[J4] ASIC[2] has core num=1
Chain[J4] ASIC[3] has core num=1
Chain[J4] ASIC[4] has core num=2
Chain[J4] ASIC[5] has core num=1
Chain[J4] ASIC[6] has core num=1
Chain[J4] ASIC[8] has core num=2
Chain[J4] ASIC[9] has core num=1
Chain[J4] ASIC[10] has core num=1
Chain[J4] ASIC[11] has core num=3
Chain[J4] ASIC[12] has core num=2
Chain[J4] ASIC[14] has core num=9
Chain[J4] ASIC[15] has core num=2
Chain[J4] ASIC[16] has core num=1
Chain[J9] has core num in PIC
Chain[J9] ASIC[1] has core num=1
Chain[J9] ASIC[2] has core num=1
Chain[J9] ASIC[3] has core num=1
Chain[J9] ASIC[4] has core num=2
Chain[J9] ASIC[8] has core num=1
Chain[J9] ASIC[9] has core num=1
Chain[J9] ASIC[10] has core num=1
Chain[J9] ASIC[11] has core num=1
Chain[J9] ASIC[13] has core num=1
Chain[J9] ASIC[14] has core num=1
Chain[J9] ASIC[15] has core num=1
Chain[J9] ASIC[16] has core num=3
Chain[J9] ASIC[17] has core num=1
Chain[J10] has core num in PIC
Chain[J10] ASIC[0] has core num=1
Chain[J10] ASIC[1] has core num=1
Chain[J10] ASIC[2] has core num=1
Chain[J10] ASIC[3] has core num=2
Chain[J10] ASIC[4] has core num=2
Chain[J10] ASIC[6] has core num=1
Chain[J10] ASIC[8] has core num=1
Chain[J10] ASIC[9] has core num=1
Chain[J10] ASIC[10] has core num=1
Chain[J10] ASIC[12] has core num=4
Chain[J10] ASIC[13] has core num=2
Chain[J10] ASIC[14] has core num=1
Chain[J10] ASIC[15] has core num=8
Chain[J10] ASIC[16] has core num=2
Chain[J10] ASIC[17] has core num=1
Chain[J11] has core num in PIC
Chain[J11] ASIC[12] has core num=1
Chain[J12] has core num in PIC
Chain[J13] has core num in PIC
Chain[J13] ASIC[0] has core num=1
Chain[J13] ASIC[1] has core num=1
Chain[J13] ASIC[2] has core num=2
Chain[J13] ASIC[3] has core num=1
Chain[J13] ASIC[4] has core num=1
Chain[J13] ASIC[5] has core num=1
Chain[J13] ASIC[8] has core num=1
Chain[J13] ASIC[9] has core num=1
Chain[J13] ASIC[11] has core num=1
Chain[J13] ASIC[12] has core num=2
Chain[J13] ASIC[13] has core num=1
Chain[J13] ASIC[14] has core num=1
Chain[J13] ASIC[16] has core num=1
Chain[J13] ASIC[17] has core num=3
Chain[J14] has core num in PIC
Chain[J14] ASIC[1] has core num=1
Chain[J14] ASIC[2] has core num=1
Chain[J14] ASIC[3] has core num=1
Chain[J14] ASIC[4] has core num=1
Chain[J14] ASIC[5] has core num=1
Chain[J14] ASIC[6] has core num=1
Chain[J14] ASIC[8] has core num=10
Chain[J14] ASIC[10] has core num=2
Chain[J14] ASIC[12] has core num=2
Chain[J14] ASIC[13] has core num=1
Chain[J14] ASIC[14] has core num=1
Chain[J14] ASIC[15] has core num=1
Chain[J14] ASIC[17] has core num=4
miner total rate=10579GH/s fixed rate=10500GH/s
read PIC voltage=930 on chain[1]
Chain:1 chipnum=18
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:1 max freq=575
Chain:1 min freq=575
read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:2 max freq=575
Chain:2 min freq=575
read PIC voltage=930 on chain[3]
Chain:3 chipnum=18
Chain[J4] voltage added=0.0V
Chain:3 base freq=581
Asic[ 0]:581
Asic[ 1]:581 Asic[ 2]:581 Asic[ 3]:581 Asic[ 4]:581 Asic[ 5]:581 Asic[ 6]:581 Asic[ 7]:581 Asic[ 8]:581
Asic[ 9]:581 Asic[10]:581 Asic[11]:581 Asic[12]:581 Asic[13]:581 Asic[14]:581 Asic[15]:581 Asic[16]:581
Asic[17]:581
Chain:3 max freq=581
Chain:3 min freq=581
read PIC voltage=930 on chain[8]
Chain:8 chipnum=18
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:8 max freq=575
Chain:8 min freq=575
read PIC voltage=930 on chain[9]
Chain:9 chipnum=18
Chain[J10] voltage added=0.0V
Chain:9 base freq=581
Asic[ 0]:581
Asic[ 1]:581 Asic[ 2]:581 Asic[ 3]:581 Asic[ 4]:581 Asic[ 5]:581 Asic[ 6]:581 Asic[ 7]:581 Asic[ 8]:581
Asic[ 9]:581 Asic[10]:581 Asic[11]:581 Asic[12]:581 Asic[13]:581 Asic[14]:581 Asic[15]:581 Asic[16]:581
Asic[17]:581
Chain:9 max freq=581
Chain:9 min freq=581
read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:10 max freq=575
Chain:10 min freq=575
read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:11 max freq=575
Chain:11 min freq=575
read PIC voltage=930 on chain[12]
Chain:12 chipnum=18
Chain[J13] voltage added=0.0V
Chain:12 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:12 max freq=575
Chain:12 min freq=575
read PIC voltage=930 on chain[13]
Chain:13 chipnum=18
Chain[J14] voltage added=0.0V
Chain:13 base freq=581
Asic[ 0]:581
Asic[ 1]:581 Asic[ 2]:581 Asic[ 3]:581 Asic[ 4]:581 Asic[ 5]:581 Asic[ 6]:581 Asic[ 7]:581 Asic[ 8]:581
Asic[ 9]:581 Asic[10]:581 Asic[11]:581 Asic[12]:581 Asic[13]:581 Asic[14]:581 Asic[15]:581 Asic[16]:581
Asic[17]:581
Chain:13 max freq=581
Chain:13 min freq=581
Miner fix freq ...
read PIC voltage=930 on chain[1]
Chain:1 chipnum=18
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:1 max freq=575
Chain:1 min freq=575
read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:2 max freq=575
Chain:2 min freq=575
read PIC voltage=930 on chain[3]
Chain:3 chipnum=18
Chain[J4] voltage added=0.0V
Chain:3 base freq=581
Asic[ 0]:581
Asic[ 1]:581 Asic[ 2]:581 Asic[ 3]:581 Asic[ 4]:581 Asic[ 5]:581 Asic[ 6]:581 Asic[ 7]:581 Asic[ 8]:581
Asic[ 9]:581 Asic[10]:581 Asic[11]:581 Asic[12]:581 Asic[13]:581 Asic[14]:581 Asic[15]:581 Asic[16]:581
Asic[17]:581
Chain:3 max freq=581
Chain:3 min freq=581
read PIC voltage=930 on chain[8]
Chain:8 chipnum=18
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:8 max freq=575
Chain:8 min freq=575
read PIC voltage=930 on chain[9]
Chain:9 chipnum=18
Chain[J10] voltage added=0.0V
Chain:9 base freq=581
Asic[ 0]:581
Asic[ 1]:581 Asic[ 2]:581 Asic[ 3]:581 Asic[ 4]:581 Asic[ 5]:581 Asic[ 6]:581 Asic[ 7]:581 Asic[ 8]:581
Asic[ 9]:581 Asic[10]:581 Asic[11]:581 Asic[12]:581 Asic[13]:581 Asic[14]:581 Asic[15]:581 Asic[16]:581
Asic[17]:581
Chain:9 max freq=581
Chain:9 min freq=581
read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:10 max freq=575
Chain:10 min freq=575
read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:11 max freq=575
Chain:11 min freq=575
read PIC voltage=930 on chain[12]
Chain:12 chipnum=18
Chain[J13] voltage added=0.0V
Chain:12 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:12 max freq=575
Chain:12 min freq=575
read PIC voltage=930 on chain[13]
Chain:13 chipnum=18
Chain[J14] voltage added=0.0V
Chain:13 base freq=581
Asic[ 0]:581
Asic[ 1]:581 Asic[ 2]:581 Asic[ 3]:581 Asic[ 4]:581 Asic[ 5]:581 Asic[ 6]:581 Asic[ 7]:581 Asic[ 8]:581
Asic[ 9]:581 Asic[10]:581 Asic[11]:581 Asic[12]:581 Asic[13]:581 Asic[14]:581 Asic[15]:581 Asic[16]:581
Asic[17]:581
Chain:13 max freq=581
Chain:13 min freq=581
max freq = 581
set baud=1
Chain[J9] PIC temp offset=1,0,0,0,0,0,40,28
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J9] chip[0] use PIC middle temp offset=0 typeID=55
New offset Chain[8] chip[0] local:29 remote:31 offset:28
Chain[J9] chip[0] get middle temp offset=28 typeID=55
Chain[J11] PIC temp offset=1,0,0,0,0,0,40,28
chain[10] temp chip I2C addr=0x98
chain[10] has no middle temp, use special fix mode.
Chain[J11] chip[0] use PIC middle temp offset=0 typeID=55
New offset Chain[10] chip[0] local:30 remote:35 offset:25
Chain[J11] chip[0] get middle temp offset=25 typeID=55
Chain[J13] PIC temp offset=-1,-1,-1,-1,-1,-1,-1,-1
chain[12] temp chip I2C addr=0x98
chain[12] has no middle temp, use special fix mode.
Warning: Chain[J13] has no temp offset in PIC! will fix it
Chain[J13] use default temp chip[0]
Chain[J13] try read temp chip[0] ID=55 (I2C addr=0x98)
New offset Chain[12] chip[0] local:29 remote:33 offset:26
Chain[J13] chip[0] get middle temp offset=26 typeID=55
single board rate=1173 voltage limit=870 on chain[1]
get PIC voltage=870 on chain[1], check: must be < 870
single board rate=1179 voltage limit=870 on chain[2]
get PIC voltage=870 on chain[2], check: must be < 870
single board rate=1175 voltage limit=870 on chain[3]
get PIC voltage=870 on chain[3], check: must be < 870
single board rate=1170 voltage limit=870 on chain[8]
get PIC voltage=870 on chain[8], check: must be < 870
single board rate=1175 voltage limit=870 on chain[9]
get PIC voltage=870 on chain[9], check: must be < 870
single board rate=1179 voltage limit=870 on chain[10]
get PIC voltage=870 on chain[10], check: must be < 870
single board rate=1179 voltage limit=870 on chain[11]
get PIC voltage=870 on chain[11], check: must be < 870
single board rate=1169 voltage limit=870 on chain[12]
get PIC voltage=870 on chain[12], check: must be < 870
single board rate=1176 voltage limit=870 on chain[13]
get PIC voltage=870 on chain[13], check: must be < 870
open core on chain[1] [8] [9]...
set voltage=870 on chain[1], the real voltage=870
Chain[J2] set working voltage=870 [11]
open core on chain[2] [10] [11]...
set voltage=870 on chain[2], the real voltage=870
Chain[J3] set working voltage=870 [11]
open core on chain[3] [12] [13]...
set voltage=870 on chain[3], the real voltage=870
Chain[J4] set working voltage=870 [11]
do heat board 8xPatten for 1 times
start send works on chain[1]
start send works on chain[2]
start send works on chain[3]
start send works on chain[8]
start send works on chain[9]
start send works on chain[10]
start send works on chain[11]
start send works on chain[12]
start send works on chain[13]
get send work num :16416 on Chain[1]
get send work num :16416 on Chain[2]
get send work num :16416 on Chain[3]
get send work num :16416 on Chain[8]
get send work num :16416 on Chain[9]
get send work num :16416 on Chain[10]
get send work num :16416 on Chain[11]
get send work num :16416 on Chain[12]
get send work num :16416 on Chain[13]
wait recv nonce on chain[1]
wait recv nonce on chain[2]
wait recv nonce on chain[3]
wait recv nonce on chain[8]
wait recv nonce on chain[9]
wait recv nonce on chain[10]
wait recv nonce on chain[11]
wait recv nonce on chain[12]
wait recv nonce on chain[13]
get nonces on chain[1]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=906 asic[04]=912 asic[05]=912 asic[06]=905 asic[07]=906
asic[08]=908 asic[09]=912 asic[10]=910 asic[11]=908 asic[12]=908 asic[13]=905 asic[14]=907 asic[15]=912
asic[16]=912 asic[17]=908
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[03]=906
core[003]=5 core[043]=5
asic[06]=905
core[084]=1
asic[07]=906
core[016]=2
asic[08]=908
core[073]=4
asic[10]=910
core[062]=6
asic[11]=908
core[006]=4
asic[12]=908
core[105]=4
asic[13]=905
core[057]=1
asic[14]=907
core[073]=3
asic[17]=908
core[069]=6 core[084]=6
freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575
total valid nonce number:16367
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:2008
last_nonce_num:143
get nonces on chain[2]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575
total valid nonce number:16416
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:2011
last_nonce_num:140
get nonces on chain[3]
require nonce number:912
require validnonce number:16416
asic[00]=901 asic[01]=912 asic[02]=908 asic[03]=909 asic[04]=900 asic[05]=904 asic[06]=910 asic[07]=912
asic[08]=907 asic[09]=907 asic[10]=910 asic[11]=898 asic[12]=907 asic[13]=912 asic[14]=873 asic[15]=907
asic[16]=909 asic[17]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[00]=901
core[022]=4 core[088]=1
asic[02]=908
core[014]=4
asic[03]=909
core[066]=5
asic[04]=900
core[054]=4 core[113]=0
asic[05]=904
core[069]=0
asic[06]=910
core[079]=6
asic[08]=907
core[104]=4 core[109]=7
asic[09]=907
core[011]=3
asic[10]=910
core[112]=6
asic[11]=898
core[012]=3 core[027]=3 core[030]=4
asic[12]=907
core[016]=5 core[055]=6
asic[14]=873
core[058]=0 core[060]=4 core[061]=4 core[062]=3 core[070]=5 core[073]=0 core[074]=5 core[087]=7 core[091]=5
asic[15]=907
core[023]=6 core[112]=5
asic[16]=909
core[034]=5
freq[00]=581 freq[01]=581 freq[02]=581 freq[03]=581 freq[04]=581 freq[05]=581 freq[06]=581 freq[07]=581
freq[08]=581 freq[09]=581 freq[10]=581 freq[11]=581 freq[12]=581 freq[13]=581 freq[14]=581 freq[15]=581
freq[16]=581 freq[17]=581
total valid nonce number:16298
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:2015
last_nonce_num:150
get nonces on chain[8]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=907 asic[02]=909 asic[03]=908 asic[04]=907 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=910 asic[09]=908 asic[10]=909 asic[11]=906 asic[12]=912 asic[13]=908 asic[14]=904 asic[15]=906
asic[16]=888 asic[17]=906
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[01]=907
core[030]=3
asic[02]=909
core[107]=5
asic[03]=908
core[026]=4
asic[04]=907
core[010]=5 core[109]=6
asic[08]=910
core[011]=6
asic[09]=908
core[000]=4
asic[10]=909
core[095]=5
asic[11]=906
core[009]=2
asic[13]=908
core[093]=4
asic[14]=904
core[027]=0
asic[15]=906
core[105]=2
asic[16]=888
core[004]=0 core[035]=0 core[063]=0
asic[17]=906
core[020]=2
freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575
total valid nonce number:16336
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:1990
last_nonce_num:120
get nonces on chain[9]
require nonce number:912
require validnonce number:16416
asic[00]=911 asic[01]=907 asic[02]=911 asic[03]=908 asic[04]=906 asic[05]=912 asic[06]=907 asic[07]=912
asic[08]=909 asic[09]=908 asic[10]=904 asic[11]=912 asic[12]=900 asic[13]=905 asic[14]=909 asic[15]=896
asic[16]=906 asic[17]=906
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[00]=911
core[099]=7
asic[01]=907
core[004]=3
asic[02]=911
core[003]=7
asic[03]=908
core[057]=7 core[076]=5
asic[04]=906
core[007]=6 core[111]=4
asic[06]=907
core[060]=3
asic[08]=909
core[017]=5
asic[09]=908
core[035]=4
asic[10]=904
core[023]=0
asic[12]=900
core[008]=3 core[027]=3 core[036]=7 core[110]=7
asic[13]=905
core[091]=6 core[109]=3
asic[14]=909
core[011]=5
asic[15]=896
core[012]=7 core[021]=4 core[023]=6 core[025]=4 core[032]=7 core[034]=6 core[041]=7 core[092]=7
asic[16]=906
core[073]=5 core[081]=5
asic[17]=906
core[107]=2
freq[00]=581 freq[01]=581 freq[02]=581 freq[03]=581 freq[04]=581 freq[05]=581 freq[06]=581 freq[07]=581
freq[08]=581 freq[09]=581 freq[10]=581 freq[11]=581 freq[12]=581 freq[13]=581 freq[14]=581 freq[15]=581
freq[16]=581 freq[17]=581
total valid nonce number:16329
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:2021
last_nonce_num:136
get nonces on chain[10]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=909 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[12]=909
core[055]=5
freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575
total valid nonce number:16413
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:2012
last_nonce_num:142
get nonces on chain[11]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575
total valid nonce number:16416
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:2011
last_nonce_num:141
get nonces on chain[12]
require nonce number:912
require validnonce number:16416
asic[00]=908 asic[01]=908 asic[02]=901 asic[03]=911 asic[04]=905 asic[05]=904 asic[06]=912 asic[07]=912
asic[08]=906 asic[09]=909 asic[10]=912 asic[11]=911 asic[12]=907 asic[13]=909 asic[14]=911 asic[15]=912
asic[16]=909 asic[17]=905
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[00]=908
core[112]=4
asic[01]=908
core[089]=4
asic[02]=901
core[061]=1 core[070]=4
asic[03]=911
core[020]=7
asic[04]=905
core[101]=1
asic[05]=904
core[093]=0
asic[08]=906
core[039]=2
asic[09]=909
core[043]=5
asic[11]=911
core[063]=7
asic[12]=907
core[005]=5 core[102]=6
asic[13]=909
core[103]=5
asic[14]=911
core[063]=7
asic[16]=909
core[020]=5
asic[17]=905
core[017]=5 core[020]=7 core[045]=5
freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575
total valid nonce number:16352
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:2003
last_nonce_num:152
get nonces on chain[13]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=904 asic[02]=904 asic[03]=909 asic[04]=909 asic[05]=909 asic[06]=908 asic[07]=912
asic[08]=863 asic[09]=912 asic[10]=905 asic[11]=912 asic[12]=904 asic[13]=908 asic[14]=907 asic[15]=910
asic[16]=912 asic[17]=897
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[01]=904
core[104]=0
asic[02]=904
core[043]=0
asic[03]=909
core[092]=5
asic[04]=909
core[085]=5
asic[05]=909
core[075]=5
asic[06]=908
core[095]=4
asic[08]=863
core[004]=2 core[030]=0 core[032]=7 core[033]=3 core[035]=3 core[036]=3 core[038]=5 core[042]=3 core[045]=3 core[053]=2
asic[10]=905
core[002]=5 core[061]=4
asic[12]=904
core[046]=2 core[067]=6
asic[13]=908
core[030]=4
asic[14]=907
core[037]=3
asic[15]=910
core[042]=6
asic[17]=897
core[072]=6 core[095]=4 core[103]=3 core[104]=4
freq[00]=581 freq[01]=581 freq[02]=581 freq[03]=581 freq[04]=581 freq[05]=581 freq[06]=581 freq[07]=581
freq[08]=581 freq[09]=581 freq[10]=581 freq[11]=581 freq[12]=581 freq[13]=581 freq[14]=581 freq[15]=581
freq[16]=581 freq[17]=581
total valid nonce number:16297
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:2012
last_nonce_num:144
chain[1]: All chip cores are opened OK!
Test Patten on chain[1]: OK!
chain[2]: All chip cores are opened OK!
Test Patten on chain[2]: OK!
chain[3]: All chip cores are opened OK!
Test Patten on chain[3]: OK!
chain[8]: All chip cores are opened OK!
Test Patten on chain[8]: OK!
chain[9]: All chip cores are opened OK!
Test Patten on chain[9]: OK!
chain[10]: All chip cores are opened OK!
Test Patten on chain[10]: OK!
chain[11]: All chip cores are opened OK!
Test Patten on chain[11]: OK!
chain[12]: All chip cores are opened OK!
Test Patten on chain[12]: OK!
chain[13]: All chip cores are opened OK!
Test Patten on chain[13]: OK!
setStartTimePoint total_tv_start_sys=180 total_tv_end_sys=181
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[1]: (asic index start from 1-18)
Asic[01]=67.5610 Asic[02]=68.4340 Asic[03]=67.6450 Asic[04]=60.1630 Asic[05]=65.8670 Asic[06]=64.0720 Asic[07]=63.4170 Asic[08]=67.6790
Asic[09]=67.7960 Asic[10]=65.6150 Asic[11]=60.5150 Asic[12]=60.6830 Asic[13]=68.3000 Asic[14]=62.9140 Asic[15]=60.0950 Asic[16]=65.9510
Asic[17]=61.5220 Asic[18]=72.4770
get RT hashrate from Chain[2]: (asic index start from 1-18)
Asic[01]=68.1320 Asic[02]=66.0350 Asic[03]=67.9980 Asic[04]=66.7730 Asic[05]=64.6420 Asic[06]=71.6210 Asic[07]=68.1490 Asic[08]=69.4400
Asic[09]=65.2960 Asic[10]=67.3770 Asic[11]=65.4980 Asic[12]=59.0390 Asic[13]=66.6220 Asic[14]=67.8970 Asic[15]=66.2860 Asic[16]=64.1890
Asic[17]=68.8030 Asic[18]=62.8640
get RT hashrate from Chain[3]: (asic index start from 1-18)
Asic[01]=66.7730 Asic[02]=61.4040 Asic[03]=40.9860 Asic[04]=67.9470 Asic[05]=67.9810 Asic[06]=68.4670 Asic[07]=64.7930 Asic[08]=65.6150
Asic[09]=65.1120 Asic[10]=65.5310 Asic[11]=65.7330 Asic[12]=68.7020 Asic[13]=69.0550 Asic[14]=69.0550 Asic[15]=62.1590 Asic[16]=66.6550
Asic[17]=64.5250 Asic[18]=68.2320
get RT hashrate from Chain[8]: (asic index start from 1-18)
Asic[01]=69.4740 Asic[02]=67.5110 Asic[03]=64.0720 Asic[04]=70.1790 Asic[05]=67.4440 Asic[06]=63.3840 Asic[07]=68.2160 Asic[08]=62.8640
Asic[09]=68.0480 Asic[10]=67.4610 Asic[11]=61.9750 Asic[12]=63.0480 Asic[13]=60.4650 Asic[14]=68.0140 Asic[15]=65.2290 Asic[16]=69.8090
Asic[17]=56.9410 Asic[18]=63.3840
get RT hashrate from Chain[9]: (asic index start from 1-18)
Asic[01]=67.7960 Asic[02]=64.7600 Asic[03]=70.4470 Asic[04]=65.4980 Asic[05]=67.9980 Asic[06]=69.7420 Asic[07]=67.4770 Asic[08]=65.5650
Asic[09]=63.0990 Asic[10]=66.8570 Asic[11]=69.8770 Asic[12]=66.9910 Asic[13]=64.0210 Asic[14]=63.4010 Asic[15]=61.5720 Asic[16]=66.9240
Asic[17]=72.8800 Asic[18]=67.0080
get RT hashrate from Chain[10]: (asic index start from 1-18)
Asic[01]=70.1280 Asic[02]=68.7020 Asic[03]=70.8660 Asic[04]=68.2830 Asic[05]=64.6760 Asic[06]=62.8970 Asic[07]=64.1050 Asic[08]=67.3770
Asic[09]=68.2490 Asic[10]=66.5880 Asic[11]=62.4950 Asic[12]=71.3360 Asic[13]=67.4440 Asic[14]=63.4510 Asic[15]=69.0380 Asic[16]=65.5980
Asic[17]=65.5820 Asic[18]=64.4910
get RT hashrate from Chain[11]: (asic index start from 1-18)
Asic[01]=62.4280 Asic[02]=65.1290 Asic[03]=62.2770 Asic[04]=65.8000 Asic[05]=67.0240 Asic[06]=67.4270 Asic[07]=65.4470 Asic[08]=62.0250
Asic[09]=63.6020 Asic[10]=66.4540 Asic[11]=67.9980 Asic[12]=63.0480 Asic[13]=62.4780 Asic[14]=64.0380 Asic[15]=65.9840 Asic[16]=63.6350
Asic[17]=63.5850 Asic[18]=62.5280
get RT hashrate from Chain[12]: (asic index start from 1-18)
Asic[01]=31.0710 Asic[02]=61.6220 Asic[03]=1.45900
get RT hashrate from Chain[13]: (asic index start from 1-18)
Asic[01]=6.12300 Asic[02]=61.1860 Asic[03]=68.6690 Asic[04]=68.6520 Asic[05]=65.9510 Asic[06]=62.4610 Asic[07]=67.9980 Asic[08]=65.4470
Asic[09]=60.6160 Asic[10]=62.4280 Asic[11]=65.3130 Asic[12]=62.4280 Asic[13]=63.0480 Asic[14]=65.1960 Asic[15]=71.3700 Asic[16]=66.2700
Asic[17]=69.2560 Asic[18]=67.7630
Check Chain[J2] ASIC RT error: (asic index start from 1-18)
Check Chain[J3] ASIC RT error: (asic index start from 1-18)
Check Chain[J4] ASIC RT error: (asic index start from 1-18)
Check Chain[J9] ASIC RT error: (asic index start from 1-18)
Check Chain[J10] ASIC RT error: (asic index start from 1-18)
Check Chain[J11] ASIC RT error: (asic index start from 1-18)
Check Chain[J12] ASIC RT error: (asic index start from 1-18)
Check Chain[J13] ASIC RT error: (asic index start from 1-18)
Check Chain[J14] ASIC RT error: (asic index start from 1-18)
Done check_asic_reg
do read temp on Chain[8]
Chain[8] Chip[1] TempTypeID=55 middle offset=28
Chain[8] Chip[1] local Temp=60
Chain[8] Chip[1] middle Temp=76
Special fix Chain[8] Chip[1] middle Temp = 75
Done read temp on Chain[8]
do read temp on Chain[10]
Chain[10] Chip[1] TempTypeID=55 middle offset=25
Chain[10] Chip[1] local Temp=56
Chain[10] Chip[1] middle Temp=71
Special fix Chain[10] Chip[1] middle Temp = 71
Done read temp on Chain[10]
do read temp on Chain[12]
Chain[12] Chip[1] TempTypeID=55 middle offset=26
Chain[12] Chip[1] local Temp=43
Chain[12] Chip[1] middle Temp=52
Special fix Chain[12] Chip[1] middle Temp = 58
Done read temp on Chain[12]
set FAN speed according to: temp_highest=60 temp_top1[PWM_T]=60 temp_top1[TEMP_POS_LOCAL]=60 temp_change=-2 fix_fan_steps=0
set normal FAN speed...
FAN PWM: 70
read_temp_func Done!
CRC error counter=23559
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000316] ps7-ttc #0 at df804000, irq=43
[ 0.000632] Console: colour dummy device 80x30
[ 0.000663] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040211] pid_max: default: 32768 minimum: 301
[ 0.040438] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040459] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042616] CPU: Testing write buffer coherency: ok
[ 0.042966] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043027] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043253] L310 cache controller enabled
[ 0.043273] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121046] CPU1: Booted secondary processor
[ 0.210232] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210367] Brought up 2 CPUs
[ 0.210386] SMP: Total of 2 processors activated.
[ 0.210395] CPU: All CPU(s) started in SVC mode.
[ 0.211092] devtmpfs: initialized
[ 0.213501] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214761] regulator-dummy: no parameters
[ 0.223333] NET: Registered protocol family 16
[ 0.225653] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.227981] cpuidle: using governor ladder
[ 0.227994] cpuidle: using governor menu
[ 0.235507] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237065] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237079] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237200] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.259708] bio: create slab
[ 0.261628] vgaarb: loaded
[ 0.262369] SCSI subsystem initialized
[ 0.263259] usbcore: registered new interface driver usbfs
[ 0.263432] usbcore: registered new interface driver hub
[ 0.263663] usbcore: registered new device driver usb
[ 0.264192] media: Linux media interface: v0.10
[ 0.264349] Linux video capture interface: v2.00
[ 0.264590] pps_core: LinuxPPS API ver. 1 registered
[ 0.264601] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.264727] PTP clock support registered
[ 0.265100] EDAC MC: Ver: 3.0.0
[ 0.266157] Advanced Linux Sound Architecture Driver Initialized.
[ 0.269153] DMA-API: preallocated 4096 debug entries
[ 0.269169] DMA-API: debugging enabled by kernel config
[ 0.269262] Switched to clocksource arm_global_timer
[ 0.290311] NET: Registered protocol family 2
[ 0.290995] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.291054] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.291140] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.291187] TCP: reno registered
[ 0.291206] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291241] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291490] NET: Registered protocol family 1
[ 0.291857] RPC: Registered named UNIX socket transport module.
[ 0.291869] RPC: Registered udp transport module.
[ 0.291877] RPC: Registered tcp transport module.
[ 0.291886] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.291899] PCI: CLS 0 bytes, default 64
[ 0.292355] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.294430] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.296647] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.296848] msgmni has been set to 967
[ 0.297655] io scheduler noop registered
[ 0.297669] io scheduler deadline registered
[ 0.297712] io scheduler cfq registered (default)
[ 0.309483] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.309502] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.435174] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.003146] console [ttyPS0] enabled
[ 1.007443] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.015103] [drm] Initialized drm 1.1.0 20060810
[ 1.032384] brd: module loaded
[ 1.041828] loop: module loaded
[ 1.051792] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.057543] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.065667] libphy: XEMACPS mii bus: probed
[ 1.070113] ------------- phy_id = 0x3625e62
[ 1.074891] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.083605] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.090368] ehci-pci: EHCI PCI platform driver
[ 1.097588] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.104435] usbcore: registered new interface driver usb-storage
[ 1.111328] mousedev: PS/2 mouse device common for all mice
[ 1.117439] i2c /dev entries driver
[ 1.124430] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.130009] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.135907] Xilinx Zynq CpuIdle Driver started
[ 1.140787] sdhci: Secure Digital Host Controller Interface driver
[ 1.146877] sdhci: Copyright(c) Pierre Ossman
[ 1.151293] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.158039] mmc0: no vqmmc regulator found
[ 1.162083] mmc0: no vmmc regulator found
[ 1.199280] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.207973] usbcore: registered new interface driver usbhid
[ 1.213489] usbhid: USB HID core driver
[ 1.218211] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.224508] nand: Micron MT29F2G08ABAEAWP
[ 1.228473] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.234412] Bad block table found at page 131008, version 0x01
[ 1.240633] Bad block table found at page 130944, version 0x01
[ 1.246683] 3 ofpart partitions found on MTD device pl353-nand
[ 1.252465] Creating 3 MTD partitions on "pl353-nand":
[ 1.257554] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.265633] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.272965] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.281981] TCP: cubic registered
[ 1.285215] NET: Registered protocol family 17
[ 1.289937] Registering SWP/SWPB emulation handler
[ 1.295871] regulator-dummy: disabling
[ 1.300261] UBI: attaching mtd1 to ubi0
[ 1.826469] UBI: scanning is finished
[ 1.838128] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.845204] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.851966] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.858631] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.865509] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.871489] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.878596] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 248547359
[ 1.887552] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.896770] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.896775] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.900851] ALSA device list:
[ 1.900855] No soundcards found.
[ 1.917215] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.981422] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.987352] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.996500] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.006376] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.011411] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D5E65D66-FDFF-460C-B3DB-A1F2DEB908D8, small LPT model
[ 2.022965] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.030394] devtmpfs: mounted
[ 2.033499] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.883523] random: dd urandom read with 0 bits of entropy available
[ 3.279306]
[ 3.279306] bcm54xx_config_init
[ 3.889310]
[ 3.889310] bcm54xx_config_init
[ 6.890130] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 6.896221] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 23.620313] In axi fpga driver!
[ 23.623388] request_mem_region OK!
[ 23.626779] AXI fpga dev virtual address is 0xdf9fc000
[ 23.631915] *base_vir_addr = 0xc510
[ 23.647603] In fpga mem driver!
[ 23.650735] request_mem_region OK!
[ 23.654241] fpga mem virtual address is 0xe2000000
[ 24.448681]
[ 24.448681] bcm54xx_config_init
[ 25.078651]
[ 25.078651] bcm54xx_config_init
[ 28.079357] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 28.085380] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 477.112344] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=8000c510
miner ID : 80148d0c6880881c
Miner Type = T9+
AsicType = 1387
real AsicNum = 18
use critical mode to search freq...
get PLUG ON=0x07003f0e
Find hashboard on Chain[1]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
Find hashboard on Chain[8]
Find hashboard on Chain[9]
Find hashboard on Chain[10]
Find hashboard on Chain[11]
Find hashboard on Chain[12]
Find hashboard on Chain[13]
set_reset_allhashboard = 0x0000ffff
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x90
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x90
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x02 0x00 0x11 0x10 0x11 0x11 0x10 0x02 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x01 0x11 0x20 0x00 0x11 0x11 0x01 0x11 0x31 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x11 0x12 0x20 0x10 0x11 0x10 0x42 0x18 0x21 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[1] has freq in PIC and will jump over...
Chain[1] has core num in PIC
Chain[1] ASIC[3] has core num=2
Chain[1] ASIC[6] has core num=1
Chain[1] ASIC[7] has core num=1
Chain[1] ASIC[8] has core num=1
Chain[1] ASIC[10] has core num=1
Chain[1] ASIC[11] has core num=1
Chain[1] ASIC[12] has core num=1
Chain[1] ASIC[13] has core num=1
Chain[1] ASIC[14] has core num=1
Chain[1] ASIC[17] has core num=2
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[2] has freq in PIC and will jump over...
Chain[2] has core num in PIC
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x20 0x11 0x21 0x10 0x21 0x13 0x20 0x92 0x10 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x21 0x11 0x00 0x11 0x01 0x21 0x10 0x13 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x01 0x11 0x11 0x10 0xa0 0x20 0x21 0x11 0x04 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[3] has freq in PIC and will jump over...
Chain[3] has core num in PIC
Chain[3] ASIC[0] has core num=2
Chain[3] ASIC[2] has core num=1
Chain[3] ASIC[3] has core num=1
Chain[3] ASIC[4] has core num=2
Chain[3] ASIC[5] has core num=1
Chain[3] ASIC[6] has core num=1
Chain[3] ASIC[8] has core num=2
Chain[3] ASIC[9] has core num=1
Chain[3] ASIC[10] has core num=1
Chain[3] ASIC[11] has core num=3
Chain[3] ASIC[12] has core num=2
Chain[3] ASIC[14] has core num=9
Chain[3] ASIC[15] has core num=2
Chain[3] ASIC[16] has core num=1
has freq in PIC, will disable freq setting.
chain[8] has freq in PIC and will jump over...
Chain[8] has core num in PIC
Chain[8] ASIC[1] has core num=1
Chain[8] ASIC[2] has core num=1
Chain[8] ASIC[3] has core num=1
Chain[8] ASIC[4] has core num=2
Chain[8] ASIC[8] has core num=1
Chain[8] ASIC[9] has core num=1
Chain[8] ASIC[10] has core num=1
Chain[8] ASIC[11] has core num=1
Chain[8] ASIC[13] has core num=1
Chain[8] ASIC[14] has core num=1
Chain[8] ASIC[15] has core num=1
Chain[8] ASIC[16] has core num=3
Chain[8] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[9] has freq in PIC and will jump over...
Chain[9] has core num in PIC
Chain[9] ASIC[0] has core num=1
Chain[9] ASIC[1] has core num=1
Chain[9] ASIC[2] has core num=1
Chain[9] ASIC[3] has core num=2
Chain[9] ASIC[4] has core num=2
Chain[9] ASIC[6] has core num=1
Chain[9] ASIC[8] has core num=1
Chain[9] ASIC[9] has core num=1
Chain[9] ASIC[10] has core num=1
Chain[9] ASIC[12] has core num=4
Chain[9] ASIC[13] has core num=2
Chain[9] ASIC[14] has core num=1
Chain[9] ASIC[15] has core num=8
Chain[9] ASIC[16] has core num=2
Chain[9] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[10] has freq in PIC and will jump over...
Chain[10] has core num in PIC
Chain[10] ASIC[12] has core num=1
has freq in PIC, will disable freq setting.
chain[11] has freq in PIC and will jump over...
Chain[11] has core num in PIC
has freq in PIC, will disable freq setting.
chain[12] has freq in PIC and will jump over...
Chain[12] has core num in PIC
Chain[12] ASIC[0] has core num=1
Chain[12] ASIC[1] has core num=1
Chain[12] ASIC[2] has core num=2
Chain[12] ASIC[3] has core num=1
Chain[12] ASIC[4] has core num=1
Chain[12] ASIC[5] has core num=1
Chain[12] ASIC[8] has core num=1
Chain[12] ASIC[9] has core num=1
Chain[12] ASIC[11] has core num=1
Chain[12] ASIC[12] has core num=2
Chain[12] ASIC[13] has core num=1
Chain[12] ASIC[14] has core num=1
Chain[12] ASIC[16] has core num=1
Chain[12] ASIC[17] has core num=3
has freq in PIC, will disable freq setting.
chain[13] has freq in PIC and will jump over...
Chain[13] has core num in PIC
Chain[13] ASIC[1] has core num=1
Chain[13] ASIC[2] has core num=1
Chain[13] ASIC[3] has core num=1
Chain[13] ASIC[4] has core num=1
Chain[13] ASIC[5] has core num=1
Chain[13] ASIC[6] has core num=1
Chain[13] ASIC[8] has core num=10
Chain[13] ASIC[10] has core num=2
Chain[13] ASIC[12] has core num=2
Chain[13] ASIC[13] has core num=1
Chain[13] ASIC[14] has core num=1
Chain[13] ASIC[15] has core num=1
Chain[13] ASIC[17] has core num=4
get PIC voltage=11 on chain[1], value=870
get PIC voltage=11 on chain[2], value=870
get PIC voltage=11 on chain[3], value=870
get PIC voltage=11 on chain[8], value=870
get PIC voltage=11 on chain[9], value=870
get PIC voltage=11 on chain[10], value=870
get PIC voltage=11 on chain[11], value=870
get PIC voltage=11 on chain[12], value=870
get PIC voltage=11 on chain[13], value=870
set_reset_allhashboard = 0x00000000
chain[8] temp offset record: 1,0,0,0,0,0,40,28
chain[8] temp chip I2C addr=0x98
chain[10] temp offset record: 1,0,0,0,0,0,40,28
chain[10] temp chip I2C addr=0x98
chain[12] temp offset record: -1,-1,-1,-1,-1,-1,-1,-1
chain[12] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 9, total chain num = 9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1403 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = T9+
Miner compile time: Fri Nov 17 18:17:49 CST 2017 type: Antminer T9+set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 80148d0c6880881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[5] speed=6120
get fan[2] speed=6120
get fan[5] speed=6120
get fan[2] speed=6120
get fan[5] speed=6120
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x90
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x02 0x00 0x11 0x10 0x11 0x11 0x10 0x02 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x01 0x11 0x20 0x00 0x11 0x11 0x01 0x11 0x31 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x11 0x12 0x20 0x10 0x11 0x10 0x42 0x18 0x21 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J2] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J2] test patten OK temp=-1
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x90
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J3] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J3] test patten OK temp=-1
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x20 0x11 0x21 0x10 0x21 0x13 0x20 0x92 0x10 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x21 0x11 0x00 0x11 0x01 0x21 0x10 0x13 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x01 0x11 0x11 0x10 0xa0 0x20 0x21 0x11 0x04 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J4] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J4] test patten OK temp=-1
Chain[J9] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J9] test patten OK temp=-1
Chain[J10] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J10] test patten OK temp=-1
Chain[J11] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J11] test patten OK temp=-1
Chain[J12] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J12] test patten OK temp=-1
Chain[J13] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J13] test patten OK temp=-1
Chain[J14] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J14] test patten OK temp=-1
Chain[J2] will use voltage=930 [1] to open core
Chain[J3] will use voltage=930 [1] to open core
Chain[J4] will use voltage=930 [1] to open core
Chain[J9] will use voltage=930 [1] to open core
Chain[J10] will use voltage=930 [1] to open core
Chain[J11] will use voltage=930 [1] to open core
Chain[J12] will use voltage=930 [1] to open core
Chain[J13] will use voltage=930 [1] to open core
Chain[J14] will use voltage=930 [1] to open core
Chain[J2] orignal chain_voltage_pic=11 value=870
Chain[J3] orignal chain_voltage_pic=11 value=870
Chain[J4] orignal chain_voltage_pic=11 value=870
Chain[J9] orignal chain_voltage_pic=1 value=930
Chain[J9] will use backup chain_voltage_pic=870 [11]
Chain[J9] get working chain_voltage_pic=11
Chain[J10] orignal chain_voltage_pic=1 value=930
Chain[J10] will use backup chain_voltage_pic=870 [11]
Chain[J10] get working chain_voltage_pic=11
Chain[J11] orignal chain_voltage_pic=1 value=930
Chain[J11] will use backup chain_voltage_pic=870 [11]
Chain[J11] get working chain_voltage_pic=11
Chain[J12] orignal chain_voltage_pic=1 value=930
Chain[J12] will use backup chain_voltage_pic=870 [11]
Chain[J12] get working chain_voltage_pic=11
Chain[J13] orignal chain_voltage_pic=1 value=930
Chain[J13] will use backup chain_voltage_pic=870 [11]
Chain[J13] get working chain_voltage_pic=11
Chain[J14] orignal chain_voltage_pic=1 value=930
Chain[J14] will use backup chain_voltage_pic=870 [11]
Chain[J14] get working chain_voltage_pic=11
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 1 time
Chain[J2] has 18 asic
Chain[J3] has 18 asic
Chain[J4] has 18 asic
Chain[J9] has 18 asic
Chain[J10] has 18 asic
Chain[J11] has 18 asic
Chain[J12] has 18 asic
Chain[J13] has 18 asic
Chain[J14] has 18 asic
Chain[J2] has core num in PIC
Chain[J2] ASIC[3] has core num=2
Chain[J2] ASIC[6] has core num=1
Chain[J2] ASIC[7] has core num=1
Chain[J2] ASIC[8] has core num=1
Chain[J2] ASIC[10] has core num=1
Chain[J2] ASIC[11] has core num=1
Chain[J2] ASIC[12] has core num=1
Chain[J2] ASIC[13] has core num=1
Chain[J2] ASIC[14] has core num=1
Chain[J2] ASIC[17] has core num=2
Chain[J3] has core num in PIC
Chain[J4] has core num in PIC
Chain[J4] ASIC[0] has core num=2
Chain[J4] ASIC[2] has core num=1
Chain[J4] ASIC[3] has core num=1
Chain[J4] ASIC[4] has core num=2
Chain[J4] ASIC[5] has core num=1
Chain[J4] ASIC[6] has core num=1
Chain[J4] ASIC[8] has core num=2
Chain[J4] ASIC[9] has core num=1
Chain[J4] ASIC[10] has core num=1
Chain[J4] ASIC[11] has core num=3
Chain[J4] ASIC[12] has core num=2
Chain[J4] ASIC[14] has core num=9
Chain[J4] ASIC[15] has core num=2
Chain[J4] ASIC[16] has core num=1
Chain[J9] has core num in PIC
Chain[J9] ASIC[1] has core num=1
Chain[J9] ASIC[2] has core num=1
Chain[J9] ASIC[3] has core num=1
Chain[J9] ASIC[4] has core num=2
Chain[J9] ASIC[8] has core num=1
Chain[J9] ASIC[9] has core num=1
Chain[J9] ASIC[10] has core num=1
Chain[J9] ASIC[11] has core num=1
Chain[J9] ASIC[13] has core num=1
Chain[J9] ASIC[14] has core num=1
Chain[J9] ASIC[15] has core num=1
Chain[J9] ASIC[16] has core num=3
Chain[J9] ASIC[17] has core num=1
Chain[J10] has core num in PIC
Chain[J10] ASIC[0] has core num=1
Chain[J10] ASIC[1] has core num=1
Chain[J10] ASIC[2] has core num=1
Chain[J10] ASIC[3] has core num=2
Chain[J10] ASIC[4] has core num=2
Chain[J10] ASIC[6] has core num=1
Chain[J10] ASIC[8] has core num=1
Chain[J10] ASIC[9] has core num=1
Chain[J10] ASIC[10] has core num=1
Chain[J10] ASIC[12] has core num=4
Chain[J10] ASIC[13] has core num=2
Chain[J10] ASIC[14] has core num=1
Chain[J10] ASIC[15] has core num=8
Chain[J10] ASIC[16] has core num=2
Chain[J10] ASIC[17] has core num=1
Chain[J11] has core num in PIC
Chain[J11] ASIC[12] has core num=1
Chain[J12] has core num in PIC
Chain[J13] has core num in PIC
Chain[J13] ASIC[0] has core num=1
Chain[J13] ASIC[1] has core num=1
Chain[J13] ASIC[2] has core num=2
Chain[J13] ASIC[3] has core num=1
Chain[J13] ASIC[4] has core num=1
Chain[J13] ASIC[5] has core num=1
Chain[J13] ASIC[8] has core num=1
Chain[J13] ASIC[9] has core num=1
Chain[J13] ASIC[11] has core num=1
Chain[J13] ASIC[12] has core num=2
Chain[J13] ASIC[13] has core num=1
Chain[J13] ASIC[14] has core num=1
Chain[J13] ASIC[16] has core num=1
Chain[J13] ASIC[17] has core num=3
Chain[J14] has core num in PIC
Chain[J14] ASIC[1] has core num=1
Chain[J14] ASIC[2] has core num=1
Chain[J14] ASIC[3] has core num=1
Chain[J14] ASIC[4] has core num=1
Chain[J14] ASIC[5] has core num=1
Chain[J14] ASIC[6] has core num=1
Chain[J14] ASIC[8] has core num=10
Chain[J14] ASIC[10] has core num=2
Chain[J14] ASIC[12] has core num=2
Chain[J14] ASIC[13] has core num=1
Chain[J14] ASIC[14] has core num=1
Chain[J14] ASIC[15] has core num=1
Chain[J14] ASIC[17] has core num=4
miner total rate=10579GH/s fixed rate=10500GH/s
read PIC voltage=930 on chain[1]
Chain:1 chipnum=18
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:1 max freq=575
Chain:1 min freq=575
read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:2 max freq=575
Chain:2 min freq=575
read PIC voltage=930 on chain[3]
Chain:3 chipnum=18
Chain[J4] voltage added=0.0V
Chain:3 base freq=581
Asic[ 0]:581
Asic[ 1]:581 Asic[ 2]:581 Asic[ 3]:581 Asic[ 4]:581 Asic[ 5]:581 Asic[ 6]:581 Asic[ 7]:581 Asic[ 8]:581
Asic[ 9]:581 Asic[10]:581 Asic[11]:581 Asic[12]:581 Asic[13]:581 Asic[14]:581 Asic[15]:581 Asic[16]:581
Asic[17]:581
Chain:3 max freq=581
Chain:3 min freq=581
read PIC voltage=930 on chain[8]
Chain:8 chipnum=18
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:8 max freq=575
Chain:8 min freq=575
read PIC voltage=930 on chain[9]
Chain:9 chipnum=18
Chain[J10] voltage added=0.0V
Chain:9 base freq=581
Asic[ 0]:581
Asic[ 1]:581 Asic[ 2]:581 Asic[ 3]:581 Asic[ 4]:581 Asic[ 5]:581 Asic[ 6]:581 Asic[ 7]:581 Asic[ 8]:581
Asic[ 9]:581 Asic[10]:581 Asic[11]:581 Asic[12]:581 Asic[13]:581 Asic[14]:581 Asic[15]:581 Asic[16]:581
Asic[17]:581
Chain:9 max freq=581
Chain:9 min freq=581
read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:10 max freq=575
Chain:10 min freq=575
read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:11 max freq=575
Chain:11 min freq=575
read PIC voltage=930 on chain[12]
Chain:12 chipnum=18
Chain[J13] voltage added=0.0V
Chain:12 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:12 max freq=575
Chain:12 min freq=575
read PIC voltage=930 on chain[13]
Chain:13 chipnum=18
Chain[J14] voltage added=0.0V
Chain:13 base freq=581
Asic[ 0]:581
Asic[ 1]:581 Asic[ 2]:581 Asic[ 3]:581 Asic[ 4]:581 Asic[ 5]:581 Asic[ 6]:581 Asic[ 7]:581 Asic[ 8]:581
Asic[ 9]:581 Asic[10]:581 Asic[11]:581 Asic[12]:581 Asic[13]:581 Asic[14]:581 Asic[15]:581 Asic[16]:581
Asic[17]:581
Chain:13 max freq=581
Chain:13 min freq=581
Miner fix freq ...
read PIC voltage=930 on chain[1]
Chain:1 chipnum=18
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:1 max freq=575
Chain:1 min freq=575
read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:2 max freq=575
Chain:2 min freq=575
read PIC voltage=930 on chain[3]
Chain:3 chipnum=18
Chain[J4] voltage added=0.0V
Chain:3 base freq=581
Asic[ 0]:581
Asic[ 1]:581 Asic[ 2]:581 Asic[ 3]:581 Asic[ 4]:581 Asic[ 5]:581 Asic[ 6]:581 Asic[ 7]:581 Asic[ 8]:581
Asic[ 9]:581 Asic[10]:581 Asic[11]:581 Asic[12]:581 Asic[13]:581 Asic[14]:581 Asic[15]:581 Asic[16]:581
Asic[17]:581
Chain:3 max freq=581
Chain:3 min freq=581
read PIC voltage=930 on chain[8]
Chain:8 chipnum=18
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:8 max freq=575
Chain:8 min freq=575
read PIC voltage=930 on chain[9]
Chain:9 chipnum=18
Chain[J10] voltage added=0.0V
Chain:9 base freq=581
Asic[ 0]:581
Asic[ 1]:581 Asic[ 2]:581 Asic[ 3]:581 Asic[ 4]:581 Asic[ 5]:581 Asic[ 6]:581 Asic[ 7]:581 Asic[ 8]:581
Asic[ 9]:581 Asic[10]:581 Asic[11]:581 Asic[12]:581 Asic[13]:581 Asic[14]:581 Asic[15]:581 Asic[16]:581
Asic[17]:581
Chain:9 max freq=581
Chain:9 min freq=581
read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:10 max freq=575
Chain:10 min freq=575
read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:11 max freq=575
Chain:11 min freq=575
read PIC voltage=930 on chain[12]
Chain:12 chipnum=18
Chain[J13] voltage added=0.0V
Chain:12 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:12 max freq=575
Chain:12 min freq=575
read PIC voltage=930 on chain[13]
Chain:13 chipnum=18
Chain[J14] voltage added=0.0V
Chain:13 base freq=581
Asic[ 0]:581
Asic[ 1]:581 Asic[ 2]:581 Asic[ 3]:581 Asic[ 4]:581 Asic[ 5]:581 Asic[ 6]:581 Asic[ 7]:581 Asic[ 8]:581
Asic[ 9]:581 Asic[10]:581 Asic[11]:581 Asic[12]:581 Asic[13]:581 Asic[14]:581 Asic[15]:581 Asic[16]:581
Asic[17]:581
Chain:13 max freq=581
Chain:13 min freq=581
max freq = 581
set baud=1
Chain[J9] PIC temp offset=1,0,0,0,0,0,40,28
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J9] chip[0] use PIC middle temp offset=0 typeID=55
New offset Chain[8] chip[0] local:29 remote:31 offset:28
Chain[J9] chip[0] get middle temp offset=28 typeID=55
Chain[J11] PIC temp offset=1,0,0,0,0,0,40,28
chain[10] temp chip I2C addr=0x98
chain[10] has no middle temp, use special fix mode.
Chain[J11] chip[0] use PIC middle temp offset=0 typeID=55
New offset Chain[10] chip[0] local:30 remote:35 offset:25
Chain[J11] chip[0] get middle temp offset=25 typeID=55
Chain[J13] PIC temp offset=-1,-1,-1,-1,-1,-1,-1,-1
chain[12] temp chip I2C addr=0x98
chain[12] has no middle temp, use special fix mode.
Warning: Chain[J13] has no temp offset in PIC! will fix it
Chain[J13] use default temp chip[0]
Chain[J13] try read temp chip[0] ID=55 (I2C addr=0x98)
New offset Chain[12] chip[0] local:29 remote:33 offset:26
Chain[J13] chip[0] get middle temp offset=26 typeID=55
single board rate=1173 voltage limit=870 on chain[1]
get PIC voltage=870 on chain[1], check: must be < 870
single board rate=1179 voltage limit=870 on chain[2]
get PIC voltage=870 on chain[2], check: must be < 870
single board rate=1175 voltage limit=870 on chain[3]
get PIC voltage=870 on chain[3], check: must be < 870
single board rate=1170 voltage limit=870 on chain[8]
get PIC voltage=870 on chain[8], check: must be < 870
single board rate=1175 voltage limit=870 on chain[9]
get PIC voltage=870 on chain[9], check: must be < 870
single board rate=1179 voltage limit=870 on chain[10]
get PIC voltage=870 on chain[10], check: must be < 870
single board rate=1179 voltage limit=870 on chain[11]
get PIC voltage=870 on chain[11], check: must be < 870
single board rate=1169 voltage limit=870 on chain[12]
get PIC voltage=870 on chain[12], check: must be < 870
single board rate=1176 voltage limit=870 on chain[13]
get PIC voltage=870 on chain[13], check: must be < 870
open core on chain[1] [8] [9]...
set voltage=870 on chain[1], the real voltage=870
Chain[J2] set working voltage=870 [11]
open core on chain[2] [10] [11]...
set voltage=870 on chain[2], the real voltage=870
Chain[J3] set working voltage=870 [11]
open core on chain[3] [12] [13]...
set voltage=870 on chain[3], the real voltage=870
Chain[J4] set working voltage=870 [11]
do heat board 8xPatten for 1 times
start send works on chain[1]
start send works on chain[2]
start send works on chain[3]
start send works on chain[8]
start send works on chain[9]
start send works on chain[10]
start send works on chain[11]
start send works on chain[12]
start send works on chain[13]
get send work num :16416 on Chain[1]
get send work num :16416 on Chain[2]
get send work num :16416 on Chain[3]
get send work num :16416 on Chain[8]
get send work num :16416 on Chain[9]
get send work num :16416 on Chain[10]
get send work num :16416 on Chain[11]
get send work num :16416 on Chain[12]
get send work num :16416 on Chain[13]
wait recv nonce on chain[1]
wait recv nonce on chain[2]
wait recv nonce on chain[3]
wait recv nonce on chain[8]
wait recv nonce on chain[9]
wait recv nonce on chain[10]
wait recv nonce on chain[11]
wait recv nonce on chain[12]
wait recv nonce on chain[13]
get nonces on chain[1]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=906 asic[04]=912 asic[05]=912 asic[06]=905 asic[07]=906
asic[08]=908 asic[09]=912 asic[10]=910 asic[11]=908 asic[12]=908 asic[13]=905 asic[14]=907 asic[15]=912
asic[16]=912 asic[17]=908
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[03]=906
core[003]=5 core[043]=5
asic[06]=905
core[084]=1
asic[07]=906
core[016]=2
asic[08]=908
core[073]=4
asic[10]=910
core[062]=6
asic[11]=908
core[006]=4
asic[12]=908
core[105]=4
asic[13]=905
core[057]=1
asic[14]=907
core[073]=3
asic[17]=908
core[069]=6 core[084]=6
freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575
total valid nonce number:16367
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:2008
last_nonce_num:143
get nonces on chain[2]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575
total valid nonce number:16416
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:2011
last_nonce_num:140
get nonces on chain[3]
require nonce number:912
require validnonce number:16416
asic[00]=901 asic[01]=912 asic[02]=908 asic[03]=909 asic[04]=900 asic[05]=904 asic[06]=910 asic[07]=912
asic[08]=907 asic[09]=907 asic[10]=910 asic[11]=898 asic[12]=907 asic[13]=912 asic[14]=873 asic[15]=907
asic[16]=909 asic[17]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[00]=901
core[022]=4 core[088]=1
asic[02]=908
core[014]=4
asic[03]=909
core[066]=5
asic[04]=900
core[054]=4 core[113]=0
asic[05]=904
core[069]=0
asic[06]=910
core[079]=6
asic[08]=907
core[104]=4 core[109]=7
asic[09]=907
core[011]=3
asic[10]=910
core[112]=6
asic[11]=898
core[012]=3 core[027]=3 core[030]=4
asic[12]=907
core[016]=5 core[055]=6
asic[14]=873
core[058]=0 core[060]=4 core[061]=4 core[062]=3 core[070]=5 core[073]=0 core[074]=5 core[087]=7 core[091]=5
asic[15]=907
core[023]=6 core[112]=5
asic[16]=909
core[034]=5
freq[00]=581 freq[01]=581 freq[02]=581 freq[03]=581 freq[04]=581 freq[05]=581 freq[06]=581 freq[07]=581
freq[08]=581 freq[09]=581 freq[10]=581 freq[11]=581 freq[12]=581 freq[13]=581 freq[14]=581 freq[15]=581
freq[16]=581 freq[17]=581
total valid nonce number:16298
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:2015
last_nonce_num:150
get nonces on chain[8]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=907 asic[02]=909 asic[03]=908 asic[04]=907 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=910 asic[09]=908 asic[10]=909 asic[11]=906 asic[12]=912 asic[13]=908 asic[14]=904 asic[15]=906
asic[16]=888 asic[17]=906
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[01]=907
core[030]=3
asic[02]=909
core[107]=5
asic[03]=908
core[026]=4
asic[04]=907
core[010]=5 core[109]=6
asic[08]=910
core[011]=6
asic[09]=908
core[000]=4
asic[10]=909
core[095]=5
asic[11]=906
core[009]=2
asic[13]=908
core[093]=4
asic[14]=904
core[027]=0
asic[15]=906
core[105]=2
asic[16]=888
core[004]=0 core[035]=0 core[063]=0
asic[17]=906
core[020]=2
freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575
total valid nonce number:16336
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:1990
last_nonce_num:120
get nonces on chain[9]
require nonce number:912
require validnonce number:16416
asic[00]=911 asic[01]=907 asic[02]=911 asic[03]=908 asic[04]=906 asic[05]=912 asic[06]=907 asic[07]=912
asic[08]=909 asic[09]=908 asic[10]=904 asic[11]=912 asic[12]=900 asic[13]=905 asic[14]=909 asic[15]=896
asic[16]=906 asic[17]=906
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[00]=911
core[099]=7
asic[01]=907
core[004]=3
asic[02]=911
core[003]=7
asic[03]=908
core[057]=7 core[076]=5
asic[04]=906
core[007]=6 core[111]=4
asic[06]=907
core[060]=3
asic[08]=909
core[017]=5
asic[09]=908
core[035]=4
asic[10]=904
core[023]=0
asic[12]=900
core[008]=3 core[027]=3 core[036]=7 core[110]=7
asic[13]=905
core[091]=6 core[109]=3
asic[14]=909
core[011]=5
asic[15]=896
core[012]=7 core[021]=4 core[023]=6 core[025]=4 core[032]=7 core[034]=6 core[041]=7 core[092]=7
asic[16]=906
core[073]=5 core[081]=5
asic[17]=906
core[107]=2
freq[00]=581 freq[01]=581 freq[02]=581 freq[03]=581 freq[04]=581 freq[05]=581 freq[06]=581 freq[07]=581
freq[08]=581 freq[09]=581 freq[10]=581 freq[11]=581 freq[12]=581 freq[13]=581 freq[14]=581 freq[15]=581
freq[16]=581 freq[17]=581
total valid nonce number:16329
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:2021
last_nonce_num:136
get nonces on chain[10]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=909 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[12]=909
core[055]=5
freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575
total valid nonce number:16413
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:2012
last_nonce_num:142
get nonces on chain[11]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575
total valid nonce number:16416
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:2011
last_nonce_num:141
get nonces on chain[12]
require nonce number:912
require validnonce number:16416
asic[00]=908 asic[01]=908 asic[02]=901 asic[03]=911 asic[04]=905 asic[05]=904 asic[06]=912 asic[07]=912
asic[08]=906 asic[09]=909 asic[10]=912 asic[11]=911 asic[12]=907 asic[13]=909 asic[14]=911 asic[15]=912
asic[16]=909 asic[17]=905
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[00]=908
core[112]=4
asic[01]=908
core[089]=4
asic[02]=901
core[061]=1 core[070]=4
asic[03]=911
core[020]=7
asic[04]=905
core[101]=1
asic[05]=904
core[093]=0
asic[08]=906
core[039]=2
asic[09]=909
core[043]=5
asic[11]=911
core[063]=7
asic[12]=907
core[005]=5 core[102]=6
asic[13]=909
core[103]=5
asic[14]=911
core[063]=7
asic[16]=909
core[020]=5
asic[17]=905
core[017]=5 core[020]=7 core[045]=5
freq[00]=575 freq[01]=575 freq[02]=575 freq[03]=575 freq[04]=575 freq[05]=575 freq[06]=575 freq[07]=575
freq[08]=575 freq[09]=575 freq[10]=575 freq[11]=575 freq[12]=575 freq[13]=575 freq[14]=575 freq[15]=575
freq[16]=575 freq[17]=575
total valid nonce number:16352
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:2003
last_nonce_num:152
get nonces on chain[13]
require nonce number:912
require validnonce number:16416
asic[00]=912 asic[01]=904 asic[02]=904 asic[03]=909 asic[04]=909 asic[05]=909 asic[06]=908 asic[07]=912
asic[08]=863 asic[09]=912 asic[10]=905 asic[11]=912 asic[12]=904 asic[13]=908 asic[14]=907 asic[15]=910
asic[16]=912 asic[17]=897
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[01]=904
core[104]=0
asic[02]=904
core[043]=0
asic[03]=909
core[092]=5
asic[04]=909
core[085]=5
asic[05]=909
core[075]=5
asic[06]=908
core[095]=4
asic[08]=863
core[004]=2 core[030]=0 core[032]=7 core[033]=3 core[035]=3 core[036]=3 core[038]=5 core[042]=3 core[045]=3 core[053]=2
asic[10]=905
core[002]=5 core[061]=4
asic[12]=904
core[046]=2 core[067]=6
asic[13]=908
core[030]=4
asic[14]=907
core[037]=3
asic[15]=910
core[042]=6
asic[17]=897
core[072]=6 core[095]=4 core[103]=3 core[104]=4
freq[00]=581 freq[01]=581 freq[02]=581 freq[03]=581 freq[04]=581 freq[05]=581 freq[06]=581 freq[07]=581
freq[08]=581 freq[09]=581 freq[10]=581 freq[11]=581 freq[12]=581 freq[13]=581 freq[14]=581 freq[15]=581
freq[16]=581 freq[17]=581
total valid nonce number:16297
total send work number:16416
require valid nonce number:16416
repeated_nonce_num:0
err_nonce_num:2012
last_nonce_num:144
chain[1]: All chip cores are opened OK!
Test Patten on chain[1]: OK!
chain[2]: All chip cores are opened OK!
Test Patten on chain[2]: OK!
chain[3]: All chip cores are opened OK!
Test Patten on chain[3]: OK!
chain[8]: All chip cores are opened OK!
Test Patten on chain[8]: OK!
chain[9]: All chip cores are opened OK!
Test Patten on chain[9]: OK!
chain[10]: All chip cores are opened OK!
Test Patten on chain[10]: OK!
chain[11]: All chip cores are opened OK!
Test Patten on chain[11]: OK!
chain[12]: All chip cores are opened OK!
Test Patten on chain[12]: OK!
chain[13]: All chip cores are opened OK!
Test Patten on chain[13]: OK!
setStartTimePoint total_tv_start_sys=180 total_tv_end_sys=181
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[1]: (asic index start from 1-18)
Asic[01]=67.5610 Asic[02]=68.4340 Asic[03]=67.6450 Asic[04]=60.1630 Asic[05]=65.8670 Asic[06]=64.0720 Asic[07]=63.4170 Asic[08]=67.6790
Asic[09]=67.7960 Asic[10]=65.6150 Asic[11]=60.5150 Asic[12]=60.6830 Asic[13]=68.3000 Asic[14]=62.9140 Asic[15]=60.0950 Asic[16]=65.9510
Asic[17]=61.5220 Asic[18]=72.4770
get RT hashrate from Chain[2]: (asic index start from 1-18)
Asic[01]=68.1320 Asic[02]=66.0350 Asic[03]=67.9980 Asic[04]=66.7730 Asic[05]=64.6420 Asic[06]=71.6210 Asic[07]=68.1490 Asic[08]=69.4400
Asic[09]=65.2960 Asic[10]=67.3770 Asic[11]=65.4980 Asic[12]=59.0390 Asic[13]=66.6220 Asic[14]=67.8970 Asic[15]=66.2860 Asic[16]=64.1890
Asic[17]=68.8030 Asic[18]=62.8640
get RT hashrate from Chain[3]: (asic index start from 1-18)
Asic[01]=66.7730 Asic[02]=61.4040 Asic[03]=40.9860 Asic[04]=67.9470 Asic[05]=67.9810 Asic[06]=68.4670 Asic[07]=64.7930 Asic[08]=65.6150
Asic[09]=65.1120 Asic[10]=65.5310 Asic[11]=65.7330 Asic[12]=68.7020 Asic[13]=69.0550 Asic[14]=69.0550 Asic[15]=62.1590 Asic[16]=66.6550
Asic[17]=64.5250 Asic[18]=68.2320
get RT hashrate from Chain[8]: (asic index start from 1-18)
Asic[01]=69.4740 Asic[02]=67.5110 Asic[03]=64.0720 Asic[04]=70.1790 Asic[05]=67.4440 Asic[06]=63.3840 Asic[07]=68.2160 Asic[08]=62.8640
Asic[09]=68.0480 Asic[10]=67.4610 Asic[11]=61.9750 Asic[12]=63.0480 Asic[13]=60.4650 Asic[14]=68.0140 Asic[15]=65.2290 Asic[16]=69.8090
Asic[17]=56.9410 Asic[18]=63.3840
get RT hashrate from Chain[9]: (asic index start from 1-18)
Asic[01]=67.7960 Asic[02]=64.7600 Asic[03]=70.4470 Asic[04]=65.4980 Asic[05]=67.9980 Asic[06]=69.7420 Asic[07]=67.4770 Asic[08]=65.5650
Asic[09]=63.0990 Asic[10]=66.8570 Asic[11]=69.8770 Asic[12]=66.9910 Asic[13]=64.0210 Asic[14]=63.4010 Asic[15]=61.5720 Asic[16]=66.9240
Asic[17]=72.8800 Asic[18]=67.0080
get RT hashrate from Chain[10]: (asic index start from 1-18)
Asic[01]=70.1280 Asic[02]=68.7020 Asic[03]=70.8660 Asic[04]=68.2830 Asic[05]=64.6760 Asic[06]=62.8970 Asic[07]=64.1050 Asic[08]=67.3770
Asic[09]=68.2490 Asic[10]=66.5880 Asic[11]=62.4950 Asic[12]=71.3360 Asic[13]=67.4440 Asic[14]=63.4510 Asic[15]=69.0380 Asic[16]=65.5980
Asic[17]=65.5820 Asic[18]=64.4910
get RT hashrate from Chain[11]: (asic index start from 1-18)
Asic[01]=62.4280 Asic[02]=65.1290 Asic[03]=62.2770 Asic[04]=65.8000 Asic[05]=67.0240 Asic[06]=67.4270 Asic[07]=65.4470 Asic[08]=62.0250
Asic[09]=63.6020 Asic[10]=66.4540 Asic[11]=67.9980 Asic[12]=63.0480 Asic[13]=62.4780 Asic[14]=64.0380 Asic[15]=65.9840 Asic[16]=63.6350
Asic[17]=63.5850 Asic[18]=62.5280
get RT hashrate from Chain[12]: (asic index start from 1-18)
Asic[01]=31.0710 Asic[02]=61.6220 Asic[03]=1.45900
get RT hashrate from Chain[13]: (asic index start from 1-18)
Asic[01]=6.12300 Asic[02]=61.1860 Asic[03]=68.6690 Asic[04]=68.6520 Asic[05]=65.9510 Asic[06]=62.4610 Asic[07]=67.9980 Asic[08]=65.4470
Asic[09]=60.6160 Asic[10]=62.4280 Asic[11]=65.3130 Asic[12]=62.4280 Asic[13]=63.0480 Asic[14]=65.1960 Asic[15]=71.3700 Asic[16]=66.2700
Asic[17]=69.2560 Asic[18]=67.7630
Check Chain[J2] ASIC RT error: (asic index start from 1-18)
Check Chain[J3] ASIC RT error: (asic index start from 1-18)
Check Chain[J4] ASIC RT error: (asic index start from 1-18)
Check Chain[J9] ASIC RT error: (asic index start from 1-18)
Check Chain[J10] ASIC RT error: (asic index start from 1-18)
Check Chain[J11] ASIC RT error: (asic index start from 1-18)
Check Chain[J12] ASIC RT error: (asic index start from 1-18)
Check Chain[J13] ASIC RT error: (asic index start from 1-18)
Check Chain[J14] ASIC RT error: (asic index start from 1-18)
Done check_asic_reg
do read temp on Chain[8]
Chain[8] Chip[1] TempTypeID=55 middle offset=28
Chain[8] Chip[1] local Temp=60
Chain[8] Chip[1] middle Temp=76
Special fix Chain[8] Chip[1] middle Temp = 75
Done read temp on Chain[8]
do read temp on Chain[10]
Chain[10] Chip[1] TempTypeID=55 middle offset=25
Chain[10] Chip[1] local Temp=56
Chain[10] Chip[1] middle Temp=71
Special fix Chain[10] Chip[1] middle Temp = 71
Done read temp on Chain[10]
do read temp on Chain[12]
Chain[12] Chip[1] TempTypeID=55 middle offset=26
Chain[12] Chip[1] local Temp=43
Chain[12] Chip[1] middle Temp=52
Special fix Chain[12] Chip[1] middle Temp = 58
Done read temp on Chain[12]
set FAN speed according to: temp_highest=60 temp_top1[PWM_T]=60 temp_top1[TEMP_POS_LOCAL]=60 temp_change=-2 fix_fan_steps=0
set normal FAN speed...
FAN PWM: 70
read_temp_func Done!
CRC error counter=23559
Moderator's note: This post was edited by frodocooper to reduce the size of the embedded image.
I bought two T9+s on a whim back when S9s were virtually impossible to get. The first one died within 3 weeks, the 2nd one died yesterday - at the 6ish week mark. Sent the first to California and got a replacement directly from China in a bit over 2 weeks. The second is headed the shortly.
Bottom line: They appear to be junk. Just use your warranty and have them replace it.
Bottom line: They appear to be junk. Just use your warranty and have them replace it.
What is your psu?
Try running any two boards if they work a day in a row.
Try another combo of any two boards
If they work a day in a row.
My guess would be a weak psu.
Also
Code that first post
Try running any two boards if they work a day in a row.
Try another combo of any two boards
If they work a day in a row.
My guess would be a weak psu.
Also
Code that first post
Hello,
When I run T9+ it works fine several hours, after that hash rate on one chain drops to 96 aproximatly, only work 2 chips. Then I reboot the device and it works fine for several hours and then again hash rate drops on the same chain. I will post kernal log. On miner status all chips are showing "o", temperatures are max 78 C. I flashed firmware and its the same. Also two chips on other chain hashing 0. Does anyone knows what is causing the problem?
Thanks in advance
When I run T9+ it works fine several hours, after that hash rate on one chain drops to 96 aproximatly, only work 2 chips. Then I reboot the device and it works fine for several hours and then again hash rate drops on the same chain. I will post kernal log. On miner status all chips are showing "o", temperatures are max 78 C. I flashed firmware and its the same. Also two chips on other chain hashing 0. Does anyone knows what is causing the problem?
Thanks in advance
Had a similar issue with my V9 and solved it by upgrading the firmware. Have you tried?
At least check with version you have vs latest available here:
https://shop.bitmain.com/support.htm?pid=007201802091434313565J4tI3p60644
Hello,
When I run T9+ it works fine several hours, after that hash rate on one chain drops to 96 aproximatly, only work 2 chips. Then I reboot the device and it works fine for several hours and then again hash rate drops on the same chain. I will post kernal log. On miner status all chips are showing "o", temperatures are max 78 C. I flashed firmware and its the same. Also two chips on other chain hashing 0. Does anyone knows what is causing the problem?
Thanks in advance.
Kernel Log
Moderator's note: This post was edited by frodocooper to add code tags.
When I run T9+ it works fine several hours, after that hash rate on one chain drops to 96 aproximatly, only work 2 chips. Then I reboot the device and it works fine for several hours and then again hash rate drops on the same chain. I will post kernal log. On miner status all chips are showing "o", temperatures are max 78 C. I flashed firmware and its the same. Also two chips on other chain hashing 0. Does anyone knows what is causing the problem?
Thanks in advance.
Kernel Log
Code:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000310] ps7-ttc #0 at df804000, irq=43
[ 0.000621] Console: colour dummy device 80x30
[ 0.000652] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040209] pid_max: default: 32768 minimum: 301
[ 0.040437] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040455] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042642] CPU: Testing write buffer coherency: ok
[ 0.042988] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043049] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[ 0.043270] L310 cache controller enabled
[ 0.043290] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121038] CPU1: Booted secondary processor
[ 0.210227] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210361] Brought up 2 CPUs
[ 0.210380] SMP: Total of 2 processors activated.
[ 0.210389] CPU: All CPU(s) started in SVC mode.
[ 0.211085] devtmpfs: initialized
[ 0.213494] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214743] regulator-dummy: no parameters
[ 0.223714] NET: Registered protocol family 16
[ 0.226028] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.228343] cpuidle: using governor ladder
[ 0.228356] cpuidle: using governor menu
[ 0.235847] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237356] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237370] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237479] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.259711] bio: create slab at 0
[ 0.261714] vgaarb: loaded
[ 0.262443] SCSI subsystem initialized
[ 0.263343] usbcore: registered new interface driver usbfs
[ 0.263518] usbcore: registered new interface driver hub
[ 0.263742] usbcore: registered new device driver usb
[ 0.264273] media: Linux media interface: v0.10
[ 0.264430] Linux video capture interface: v2.00
[ 0.264678] pps_core: LinuxPPS API ver. 1 registered
[ 0.264690] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.264816] PTP clock support registered
[ 0.265183] EDAC MC: Ver: 3.0.0
[ 0.266238] Advanced Linux Sound Architecture Driver Initialized.
[ 0.269216] DMA-API: preallocated 4096 debug entries
[ 0.269230] DMA-API: debugging enabled by kernel config
[ 0.269318] Switched to clocksource arm_global_timer
[ 0.290495] NET: Registered protocol family 2
[ 0.291190] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.291247] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.291333] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.291384] TCP: reno registered
[ 0.291403] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291437] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291693] NET: Registered protocol family 1
[ 0.292028] RPC: Registered named UNIX socket transport module.
[ 0.292040] RPC: Registered udp transport module.
[ 0.292049] RPC: Registered tcp transport module.
[ 0.292057] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.292071] PCI: CLS 0 bytes, default 64
[ 0.292534] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.294594] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.296781] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.296974] msgmni has been set to 967
[ 0.297768] io scheduler noop registered
[ 0.297781] io scheduler deadline registered
[ 0.297823] io scheduler cfq registered (default)
[ 0.306774] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.306795] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.432479] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.000016] console [ttyPS0] enabled
[ 1.004299] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.011953] [drm] Initialized drm 1.1.0 20060810
[ 1.029111] brd: module loaded
[ 1.038544] loop: module loaded
[ 1.048073] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.054086] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.062033] libphy: XEMACPS mii bus: probed
[ 1.066402] ------------- phy_id = 0x3625e62
[ 1.071398] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.080077] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.086700] ehci-pci: EHCI PCI platform driver
[ 1.093998] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.100840] usbcore: registered new interface driver usb-storage
[ 1.107687] mousedev: PS/2 mouse device common for all mice
[ 1.113837] i2c /dev entries driver
[ 1.120753] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.126242] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.132178] Xilinx Zynq CpuIdle Driver started
[ 1.137046] sdhci: Secure Digital Host Controller Interface driver
[ 1.143220] sdhci: Copyright(c) Pierre Ossman
[ 1.147488] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.154315] mmc0: no vqmmc regulator found
[ 1.158333] mmc0: no vmmc regulator found
[ 1.199341] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.208022] usbcore: registered new interface driver usbhid
[ 1.213532] usbhid: USB HID core driver
[ 1.218243] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.224541] nand: Micron MT29F2G08ABAEAWP
[ 1.228511] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.234453] Bad block table found at page 131008, version 0x01
[ 1.240677] Bad block table found at page 130944, version 0x01
[ 1.246734] 3 ofpart partitions found on MTD device pl353-nand
[ 1.252517] Creating 3 MTD partitions on "pl353-nand":
[ 1.257610] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.265708] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.273066] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.282090] TCP: cubic registered
[ 1.285331] NET: Registered protocol family 17
[ 1.290060] Registering SWP/SWPB emulation handler
[ 1.295944] regulator-dummy: disabling
[ 1.300318] UBI: attaching mtd1 to ubi0
[ 1.828083] UBI: scanning is finished
[ 1.839743] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.846795] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.853583] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.860267] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.867105] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.873115] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.880226] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 862493722
[ 1.889153] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.898384] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.898392] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.914648] ALSA device list:
[ 1.917535] No soundcards found.
[ 1.922945] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.983287] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.989213] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.998360] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.008237] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.013273] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 2A24A8E1-2021-4A54-8A4E-D8E294AE00E5, small LPT model
[ 2.024838] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.031824] devtmpfs: mounted
[ 2.034937] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.880191] random: dd urandom read with 0 bits of entropy available
[ 3.279340]
[ 3.279340] bcm54xx_config_init
[ 3.889356]
[ 3.889356] bcm54xx_config_init
[ 7.890186] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.896292] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 23.049192] In axi fpga driver!
[ 23.052260] request_mem_region OK!
[ 23.055651] AXI fpga dev virtual address is 0xdf9fc000
[ 23.060789] *base_vir_addr = 0xc510
[ 23.075999] In fpga mem driver!
[ 23.079175] request_mem_region OK!
[ 23.082679] fpga mem virtual address is 0xe2000000
[ 23.888571]
[ 23.888571] bcm54xx_config_init
[ 24.518464]
[ 24.518464] bcm54xx_config_init
[ 28.518791] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 28.524896] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 1206.365243] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=8000c510
miner ID : 805c6dc46880881c
Miner Type = T9+
AsicType = 1387
real AsicNum = 18
use critical mode to search freq...
get PLUG ON=0x07003f0e
Find hashboard on Chain[1]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
Find hashboard on Chain[8]
Find hashboard on Chain[9]
Find hashboard on Chain[10]
Find hashboard on Chain[11]
Find hashboard on Chain[12]
Find hashboard on Chain[13]
set_reset_allhashboard = 0x0000ffff
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x90
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x90
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x11 0x11 0x11 0x10 0x16 0x10 0x21 0x12 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x15 0x10 0x32 0x20 0x20 0x10 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x11 0x11 0x11 0x11 0x10 0x11 0x00 0x11 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[1] has freq in PIC and will jump over...
Chain[1] has core num in PIC
Chain[1] ASIC[0] has core num=1
Chain[1] ASIC[1] has core num=1
Chain[1] ASIC[2] has core num=1
Chain[1] ASIC[3] has core num=1
Chain[1] ASIC[4] has core num=1
Chain[1] ASIC[5] has core num=1
Chain[1] ASIC[6] has core num=1
Chain[1] ASIC[7] has core num=1
Chain[1] ASIC[8] has core num=1
Chain[1] ASIC[10] has core num=1
Chain[1] ASIC[11] has core num=6
Chain[1] ASIC[12] has core num=1
Chain[1] ASIC[14] has core num=2
Chain[1] ASIC[15] has core num=1
Chain[1] ASIC[16] has core num=1
Chain[1] ASIC[17] has core num=2
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x10 0x10 0x01 0x02 0x11 0x11 0x12 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x01 0x01 0x02 0x11 0x10 0x11 0x10 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x20 0x11 0x12 0x01 0x01 0x01 0x01 0x11 0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[2] has freq in PIC and will jump over...
Chain[2] has core num in PIC
Chain[2] ASIC[2] has core num=1
Chain[2] ASIC[4] has core num=1
Chain[2] ASIC[7] has core num=1
Chain[2] ASIC[9] has core num=2
Chain[2] ASIC[10] has core num=1
Chain[2] ASIC[11] has core num=1
Chain[2] ASIC[12] has core num=1
Chain[2] ASIC[13] has core num=1
Chain[2] ASIC[14] has core num=1
Chain[2] ASIC[15] has core num=2
Chain[2] ASIC[16] has core num=1
Chain[2] ASIC[17] has core num=1
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x01 0x13 0x22 0x21 0x23 0x10 0x02 0x10 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x15 0x11 0x11 0x00 0x00 0x01 0x11 0x11 0x21 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x20 0x10 0x00 0x03 0x01 0x31 0x01 0x00 0x18 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[3] has freq in PIC and will jump over...
Chain[3] has core num in PIC
Chain[3] ASIC[1] has core num=1
Chain[3] ASIC[2] has core num=1
Chain[3] ASIC[3] has core num=3
Chain[3] ASIC[4] has core num=2
Chain[3] ASIC[5] has core num=2
Chain[3] ASIC[6] has core num=2
Chain[3] ASIC[7] has core num=1
Chain[3] ASIC[8] has core num=2
Chain[3] ASIC[9] has core num=3
Chain[3] ASIC[10] has core num=1
Chain[3] ASIC[13] has core num=2
Chain[3] ASIC[14] has core num=1
Chain[3] ASIC[16] has core num=1
Chain[3] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[8] has freq in PIC and will jump over...
Chain[8] has core num in PIC
Chain[8] ASIC[0] has core num=1
Chain[8] ASIC[1] has core num=1
Chain[8] ASIC[2] has core num=1
Chain[8] ASIC[3] has core num=5
Chain[8] ASIC[4] has core num=1
Chain[8] ASIC[6] has core num=3
Chain[8] ASIC[7] has core num=2
Chain[8] ASIC[8] has core num=2
Chain[8] ASIC[10] has core num=2
Chain[8] ASIC[12] has core num=1
has freq in PIC, will disable freq setting.
chain[9] has freq in PIC and will jump over...
Chain[9] has core num in PIC
Chain[9] ASIC[0] has core num=1
Chain[9] ASIC[1] has core num=1
Chain[9] ASIC[2] has core num=1
Chain[9] ASIC[3] has core num=1
Chain[9] ASIC[4] has core num=1
Chain[9] ASIC[5] has core num=1
Chain[9] ASIC[6] has core num=1
Chain[9] ASIC[7] has core num=1
Chain[9] ASIC[8] has core num=1
Chain[9] ASIC[9] has core num=1
Chain[9] ASIC[10] has core num=1
Chain[9] ASIC[12] has core num=1
Chain[9] ASIC[13] has core num=1
Chain[9] ASIC[16] has core num=1
Chain[9] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[10] has freq in PIC and will jump over...
Chain[10] has core num in PIC
Chain[10] ASIC[0] has core num=1
Chain[10] ASIC[1] has core num=1
Chain[10] ASIC[3] has core num=1
Chain[10] ASIC[5] has core num=1
Chain[10] ASIC[7] has core num=2
Chain[10] ASIC[8] has core num=1
Chain[10] ASIC[9] has core num=1
Chain[10] ASIC[10] has core num=1
Chain[10] ASIC[12] has core num=1
Chain[10] ASIC[13] has core num=1
Chain[10] ASIC[14] has core num=1
Chain[10] ASIC[16] has core num=1
Chain[10] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[11] has freq in PIC and will jump over...
Chain[11] has core num in PIC
Chain[11] ASIC[0] has core num=2
Chain[11] ASIC[2] has core num=1
Chain[11] ASIC[3] has core num=1
Chain[11] ASIC[4] has core num=1
Chain[11] ASIC[5] has core num=2
Chain[11] ASIC[7] has core num=1
Chain[11] ASIC[9] has core num=1
Chain[11] ASIC[11] has core num=1
Chain[11] ASIC[13] has core num=1
Chain[11] ASIC[14] has core num=1
Chain[11] ASIC[15] has core num=1
Chain[11] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[12] has freq in PIC and will jump over...
Chain[12] has core num in PIC
Chain[12] ASIC[0] has core num=1
Chain[12] ASIC[1] has core num=5
Chain[12] ASIC[2] has core num=1
Chain[12] ASIC[3] has core num=1
Chain[12] ASIC[4] has core num=1
Chain[12] ASIC[5] has core num=1
Chain[12] ASIC[11] has core num=1
Chain[12] ASIC[12] has core num=1
Chain[12] ASIC[13] has core num=1
Chain[12] ASIC[14] has core num=1
Chain[12] ASIC[15] has core num=1
Chain[12] ASIC[16] has core num=2
Chain[12] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[13] has freq in PIC and will jump over...
Chain[13] has core num in PIC
Chain[13] ASIC[0] has core num=2
Chain[13] ASIC[2] has core num=1
Chain[13] ASIC[7] has core num=3
Chain[13] ASIC[9] has core num=1
Chain[13] ASIC[10] has core num=3
Chain[13] ASIC[11] has core num=1
Chain[13] ASIC[13] has core num=1
Chain[13] ASIC[16] has core num=1
Chain[13] ASIC[17] has core num=8
get PIC voltage=11 on chain[1], value=870
get PIC voltage=11 on chain[2], value=870
get PIC voltage=11 on chain[3], value=870
get PIC voltage=11 on chain[8], value=870
get PIC voltage=11 on chain[9], value=870
get PIC voltage=11 on chain[10], value=870
get PIC voltage=11 on chain[11], value=870
get PIC voltage=11 on chain[12], value=870
get PIC voltage=11 on chain[13], value=870
set_reset_allhashboard = 0x00000000
chain[8] temp offset record: 1,1,0,0,0,0,33,28
chain[8] temp chip I2C addr=0x98
chain[10] temp offset record: 1,2,0,0,0,0,33,28
chain[10] temp chip I2C addr=0x98
chain[12] temp offset record: 1,-1,0,0,0,0,33,28
chain[12] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 9, total chain num = 9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1401 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = T9+
Miner compile time: Fri Nov 24 23:19:16 EST 2017 type: Antminer T9+set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 805c6dc46880881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[5] speed=5760
get fan[2] speed=5880
get fan[5] speed=5760
get fan[2] speed=5880
get fan[5] speed=5760
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x90
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x11 0x11 0x11 0x10 0x16 0x10 0x21 0x12 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x15 0x10 0x32 0x20 0x20 0x10 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x11 0x11 0x11 0x11 0x10 0x11 0x00 0x11 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J2] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J2] test patten OK temp=-1
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x90
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x10 0x10 0x01 0x02 0x11 0x11 0x12 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x01 0x01 0x02 0x11 0x10 0x11 0x10 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x20 0x11 0x12 0x01 0x01 0x01 0x01 0x11 0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J3] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J3] test patten OK temp=-1
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x01 0x13 0x22 0x21 0x23 0x10 0x02 0x10 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x15 0x11 0x11 0x00 0x00 0x01 0x11 0x11 0x21 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x20 0x10 0x00 0x03 0x01 0x31 0x01 0x00 0x18 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J4] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J4] test patten OK temp=-1
Chain[J9] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J9] test patten OK temp=-1
Chain[J10] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J10] test patten OK temp=-1
Chain[J11] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J11] test patten OK temp=-1
Chain[J12] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J12] test patten OK temp=-1
Chain[J13] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J13] test patten OK temp=-1
Chain[J14] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J14] test patten OK temp=-1
Chain[J2] will use voltage=930 [1] to open core
Chain[J3] will use voltage=930 [1] to open core
Chain[J4] will use voltage=930 [1] to open core
Chain[J9] will use voltage=930 [1] to open core
Chain[J10] will use voltage=930 [1] to open core
Chain[J11] will use voltage=930 [1] to open core
Chain[J12] will use voltage=930 [1] to open core
Chain[J13] will use voltage=930 [1] to open core
Chain[J14] will use voltage=930 [1] to open core
Chain[J2] orignal chain_voltage_pic=11 value=870
Chain[J3] orignal chain_voltage_pic=11 value=870
Chain[J4] orignal chain_voltage_pic=11 value=870
Chain[J9] orignal chain_voltage_pic=1 value=930
Chain[J9] will use backup chain_voltage_pic=870 [11]
Chain[J9] get working chain_voltage_pic=11
Chain[J10] orignal chain_voltage_pic=1 value=930
Chain[J10] will use backup chain_voltage_pic=870 [11]
Chain[J10] get working chain_voltage_pic=11
Chain[J11] orignal chain_voltage_pic=1 value=930
Chain[J11] will use backup chain_voltage_pic=870 [11]
Chain[J11] get working chain_voltage_pic=11
Chain[J12] orignal chain_voltage_pic=1 value=930
Chain[J12] will use backup chain_voltage_pic=870 [11]
Chain[J12] get working chain_voltage_pic=11
Chain[J13] orignal chain_voltage_pic=1 value=930
Chain[J13] will use backup chain_voltage_pic=870 [11]
Chain[J13] get working chain_voltage_pic=11
Chain[J14] orignal chain_voltage_pic=1 value=930
Chain[J14] will use backup chain_voltage_pic=870 [11]
Chain[J14] get working chain_voltage_pic=11
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 1 time
Chain[J2] has 18 asic
Chain[J3] has 18 asic
Chain[J4] has 18 asic
Chain[J9] has 18 asic
Chain[J10] has 18 asic
Chain[J11] has 18 asic
Chain[J12] has 18 asic
Chain[J13] has 18 asic
Chain[J14] has 18 asic
Chain[J2] has core num in PIC
Chain[J2] ASIC[0] has core num=1
Chain[J2] ASIC[1] has core num=1
Chain[J2] ASIC[2] has core num=1
Chain[J2] ASIC[3] has core num=1
Chain[J2] ASIC[4] has core num=1
Chain[J2] ASIC[5] has core num=1
Chain[J2] ASIC[6] has core num=1
Chain[J2] ASIC[7] has core num=1
Chain[J2] ASIC[8] has core num=1
Chain[J2] ASIC[10] has core num=1
Chain[J2] ASIC[11] has core num=6
Chain[J2] ASIC[12] has core num=1
Chain[J2] ASIC[14] has core num=2
Chain[J2] ASIC[15] has core num=1
Chain[J2] ASIC[16] has core num=1
Chain[J2] ASIC[17] has core num=2
Chain[J3] has core num in PIC
Chain[J3] ASIC[2] has core num=1
Chain[J3] ASIC[4] has core num=1
Chain[J3] ASIC[7] has core num=1
Chain[J3] ASIC[9] has core num=2
Chain[J3] ASIC[10] has core num=1
Chain[J3] ASIC[11] has core num=1
Chain[J3] ASIC[12] has core num=1
Chain[J3] ASIC[13] has core num=1
Chain[J3] ASIC[14] has core num=1
Chain[J3] ASIC[15] has core num=2
Chain[J3] ASIC[16] has core num=1
Chain[J3] ASIC[17] has core num=1
Chain[J4] has core num in PIC
Chain[J4] ASIC[1] has core num=1
Chain[J4] ASIC[2] has core num=1
Chain[J4] ASIC[3] has core num=3
Chain[J4] ASIC[4] has core num=2
Chain[J4] ASIC[5] has core num=2
Chain[J4] ASIC[6] has core num=2
Chain[J4] ASIC[7] has core num=1
Chain[J4] ASIC[8] has core num=2
Chain[J4] ASIC[9] has core num=3
Chain[J4] ASIC[10] has core num=1
Chain[J4] ASIC[13] has core num=2
Chain[J4] ASIC[14] has core num=1
Chain[J4] ASIC[16] has core num=1
Chain[J4] ASIC[17] has core num=1
Chain[J9] has core num in PIC
Chain[J9] ASIC[0] has core num=1
Chain[J9] ASIC[1] has core num=1
Chain[J9] ASIC[2] has core num=1
Chain[J9] ASIC[3] has core num=5
Chain[J9] ASIC[4] has core num=1
Chain[J9] ASIC[6] has core num=3
Chain[J9] ASIC[7] has core num=2
Chain[J9] ASIC[8] has core num=2
Chain[J9] ASIC[10] has core num=2
Chain[J9] ASIC[12] has core num=1
Chain[J10] has core num in PIC
Chain[J10] ASIC[0] has core num=1
Chain[J10] ASIC[1] has core num=1
Chain[J10] ASIC[2] has core num=1
Chain[J10] ASIC[3] has core num=1
Chain[J10] ASIC[4] has core num=1
Chain[J10] ASIC[5] has core num=1
Chain[J10] ASIC[6] has core num=1
Chain[J10] ASIC[7] has core num=1
Chain[J10] ASIC[8] has core num=1
Chain[J10] ASIC[9] has core num=1
Chain[J10] ASIC[10] has core num=1
Chain[J10] ASIC[12] has core num=1
Chain[J10] ASIC[13] has core num=1
Chain[J10] ASIC[16] has core num=1
Chain[J10] ASIC[17] has core num=1
Chain[J11] has core num in PIC
Chain[J11] ASIC[0] has core num=1
Chain[J11] ASIC[1] has core num=1
Chain[J11] ASIC[3] has core num=1
Chain[J11] ASIC[5] has core num=1
Chain[J11] ASIC[7] has core num=2
Chain[J11] ASIC[8] has core num=1
Chain[J11] ASIC[9] has core num=1
Chain[J11] ASIC[10] has core num=1
Chain[J11] ASIC[12] has core num=1
Chain[J11] ASIC[13] has core num=1
Chain[J11] ASIC[14] has core num=1
Chain[J11] ASIC[16] has core num=1
Chain[J11] ASIC[17] has core num=1
Chain[J12] has core num in PIC
Chain[J12] ASIC[0] has core num=2
Chain[J12] ASIC[2] has core num=1
Chain[J12] ASIC[3] has core num=1
Chain[J12] ASIC[4] has core num=1
Chain[J12] ASIC[5] has core num=2
Chain[J12] ASIC[7] has core num=1
Chain[J12] ASIC[9] has core num=1
Chain[J12] ASIC[11] has core num=1
Chain[J12] ASIC[13] has core num=1
Chain[J12] ASIC[14] has core num=1
Chain[J12] ASIC[15] has core num=1
Chain[J12] ASIC[17] has core num=1
Chain[J13] has core num in PIC
Chain[J13] ASIC[0] has core num=1
Chain[J13] ASIC[1] has core num=5
Chain[J13] ASIC[2] has core num=1
Chain[J13] ASIC[3] has core num=1
Chain[J13] ASIC[4] has core num=1
Chain[J13] ASIC[5] has core num=1
Chain[J13] ASIC[11] has core num=1
Chain[J13] ASIC[12] has core num=1
Chain[J13] ASIC[13] has core num=1
Chain[J13] ASIC[14] has core num=1
Chain[J13] ASIC[15] has core num=1
Chain[J13] ASIC[16] has core num=2
Chain[J13] ASIC[17] has core num=1
Chain[J14] has core num in PIC
Chain[J14] ASIC[0] has core num=2
Chain[J14] ASIC[2] has core num=1
Chain[J14] ASIC[7] has core num=3
Chain[J14] ASIC[9] has core num=1
Chain[J14] ASIC[10] has core num=3
Chain[J14] ASIC[11] has core num=1
Chain[J14] ASIC[13] has core num=1
Chain[J14] ASIC[16] has core num=1
Chain[J14] ASIC[17] has core num=8
miner total rate=10538GH/s fixed rate=10500GH/s
read PIC voltage=930 on chain[1]
Chain:1 chipnum=18
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:1 max freq=575
Chain:1 min freq=575
read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:2 max freq=575
Chain:2 min freq=575
read PIC voltage=930 on chain[3]
Chain:3 chipnum=18
Chain[J4] voltage added=0.0V
Chain:3 base freq=581
Asic[ 0]:581
Asic[ 1]:581 Asic[ 2]:581 Asic[ 3]:581 Asic[ 4]:581 Asic[ 5]:581 Asic[ 6]:581 Asic[ 7]:581 Asic[ 8]:581
Asic[ 9]:581 Asic[10]:581 Asic[11]:581 Asic[12]:581 Asic[13]:581 Asic[14]:581 Asic[15]:581 Asic[16]:581
Asic[17]:581
Chain:3 max freq=581
Chain:3 min freq=581
read PIC voltage=930 on chain[8]
Chain:8 chipnum=18
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:8 max freq=575
Chain:8 min freq=575
read PIC voltage=930 on chain[9]
Chain:9 chipnum=18
Chain[J10] voltage added=0.0V
Chain:9 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:9 max freq=575
Chain:9 min freq=575
read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:10 max freq=575
Chain:10 min freq=575
read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:11 max freq=575
Chain:11 min freq=575
read PIC voltage=930 on chain[12]
Chain:12 chipnum=18
Chain[J13] voltage added=0.0V
Chain:12 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:12 max freq=575
Chain:12 min freq=575
read PIC voltage=930 on chain[13]
Chain:13 chipnum=18
Chain[J14] voltage added=0.0V
Chain:13 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:13 max freq=575
Chain:13 min freq=575
Miner fix freq ...
read PIC voltage=930 on chain[1]
Chain:1 chipnum=18
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:1 max freq=575
Chain:1 min freq=575
read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:2 max freq=575
Chain:2 min freq=575
read PIC voltage=930 on chain[3]
Chain:3 chipnum=18
Chain[J4] voltage added=0.0V
Chain:3 base freq=581
Asic[ 0]:581
Asic[ 1]:581 Asic[ 2]:581 Asic[ 3]:581 Asic[ 4]:581 Asic[ 5]:581 Asic[ 6]:581 Asic[ 7]:581 Asic[ 8]:581
Asic[ 9]:581 Asic[10]:581 Asic[11]:581 Asic[12]:581 Asic[13]:581 Asic[14]:581 Asic[15]:581 Asic[16]:581
Asic[17]:581
Chain:3 max freq=581
Chain:3 min freq=581
read PIC voltage=930 on chain[8]
Chain:8 chipnum=18
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:8 max freq=575
Chain:8 min freq=575
read PIC voltage=930 on chain[9]
Chain:9 chipnum=18
Chain[J10] voltage added=0.0V
Chain:9 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:9 max freq=575
Chain:9 min freq=575
read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:10 max freq=575
Chain:10 min freq=575
read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:11 max freq=575
Chain:11 min freq=575
read PIC voltage=930 on chain[12]
Chain:12 chipnum=18
Chain[J13] voltage added=0.0V
Chain:12 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:12 max freq=575
Chain:12 min freq=575
read PIC voltage=930 on chain[13]
Chain:13 chipnum=18
Chain[J14] voltage added=0.0V
Chain:13 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:13 max freq=575
Chain:13 min freq=575
max freq = 581
set baud=1
Chain[J9] PIC temp offset=1,1,0,0,0,0,33,28
chain[8] temp chip I2C addr=0x98
Chain[J9] chip[0] use PIC middle temp offset=1 typeID=41
New offset Chain[8] chip[0] local:25 remote:23 offset:32
Chain[J9] chip[0] get middle temp offset=32 typeID=41
Chain[J11] PIC temp offset=1,2,0,0,0,0,33,28
chain[10] temp chip I2C addr=0x98
Chain[J11] chip[0] use PIC middle temp offset=2 typeID=41
New offset Chain[10] chip[0] local:25 remote:23 offset:32
Chain[J11] chip[0] get middle temp offset=32 typeID=41
Chain[J13] PIC temp offset=1,-1,0,0,0,0,33,28
chain[12] temp chip I2C addr=0x98
Chain[J13] chip[0] use PIC middle temp offset=-1 typeID=41
New offset Chain[12] chip[0] local:25 remote:25 offset:30
Chain[J13] chip[0] get middle temp offset=30 typeID=41
single board rate=1166 voltage limit=870 on chain[1]
get PIC voltage=870 on chain[1], check: must be < 870
single board rate=1171 voltage limit=870 on chain[2]
get PIC voltage=870 on chain[2], check: must be < 870
single board rate=1178 voltage limit=870 on chain[3]
get PIC voltage=870 on chain[3], check: must be < 870
single board rate=1168 voltage limit=870 on chain[8]
get PIC voltage=870 on chain[8], check: must be < 870
single board rate=1171 voltage limit=870 on chain[9]
get PIC voltage=870 on chain[9], check: must be < 870
single board rate=1171 voltage limit=870 on chain[10]
get PIC voltage=870 on chain[10], check: must be < 870
single board rate=1171 voltage limit=870 on chain[11]
get PIC voltage=870 on chain[11], check: must be < 870
single board rate=1169 voltage limit=870 on chain[12]
get PIC voltage=870 on chain[12], check: must be < 870
single board rate=1167 voltage limit=870 on chain[13]
get PIC voltage=870 on chain[13], check: must be < 870
open core on chain[1] [8] [9]...
set voltage=870 on chain[1], the real voltage=870
Chain[J2] set working voltage=870 [11]
open core on chain[2] [10] [11]...
set voltage=870 on chain[2], the real voltage=870
Chain[J3] set working voltage=870 [11]
open core on chain[3] [12] [13]...
set voltage=870 on chain[3], the real voltage=870
Chain[J4] set working voltage=870 [11]
setStartTimePoint total_tv_start_sys=144 total_tv_end_sys=145
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[1]: (asic index start from 1-18)
Asic[01]=59.9780 Asic[02]=68.5510 Asic[03]=62.1760 Asic[04]=63.7860 Asic[05]=65.9170 Asic[06]=61.9410 Asic[07]=65.4140 Asic[08]=61.4710
Asic[09]=56.6390 Asic[10]=65.1620 Asic[11]=61.8740 Asic[12]=62.7630 Asic[13]=62.7800 Asic[14]=61.5550 Asic[15]=65.8500 Asic[16]=68.3500
Asic[17]=62.0750 Asic[18]=61.3870
get RT hashrate from Chain[2]: (asic index start from 1-18)
[color=red][b]Asic[01]=0.00000 Asic[02]=0.00000 [/b][/color]Asic[03]=66.2530 Asic[04]=68.8200 Asic[05]=66.9410 Asic[06]=65.1290 Asic[07]=63.2660 Asic[08]=65.7160
Asic[09]=64.0380 Asic[10]=60.4310 Asic[11]=59.9280 Asic[12]=68.4840 Asic[13]=65.0450 Asic[14]=68.8030 Asic[15]=63.8540 Asic[16]=67.0920
Asic[17]=61.0350 Asic[18]=64.4740
get RT hashrate from Chain[3]: (asic index start from 1-18)
Asic[01]=66.1690 Asic[02]=66.7560 Asic[03]=67.2090 Asic[04]=67.6790 Asic[05]=67.7460 Asic[06]=63.2160 Asic[07]=64.4740 Asic[08]=63.0320
Asic[09]=67.6960 Asic[10]=64.8430 Asic[11]=62.9480 Asic[12]=63.1660 Asic[13]=67.6450 Asic[14]=62.9310 Asic[15]=66.7220 Asic[16]=68.8360
Asic[17]=65.9680 Asic[18]=65.6990
get RT hashrate from Chain[8]: (asic index start from 1-18)
Asic[01]=68.3160 Asic[02]=66.3870 Asic[03]=66.7060 Asic[04]=68.6020 Asic[05]=68.2660 Asic[06]=66.7730 Asic[07]=63.0820 Asic[08]=66.9070
Asic[09]=63.3330 Asic[10]=65.0620 Asic[11]=61.0010 Asic[12]=64.1390 Asic[13]=66.2190 Asic[14]=65.7330 Asic[15]=68.1820 Asic[16]=66.3030
Asic[17]=67.4770 Asic[18]=61.7560
get RT hashrate from Chain[9]: (asic index start from 1-18)
Asic[01]=65.8840 Asic[02]=69.0210 Asic[03]=65.4140 Asic[04]=65.8000 Asic[05]=67.1080 Asic[06]=64.7260 Asic[07]=65.5820 Asic[08]=62.4610
Asic[09]=65.3800 Asic[10]=69.2890 Asic[11]=68.3000 Asic[12]=60.4140 Asic[13]=64.2730 Asic[14]=61.3200 Asic[15]=62.8300 Asic[16]=63.7700
Asic[17]=68.5180 Asic[18]=67.4610
get RT hashrate from Chain[10]: (asic index start from 1-18)
Asic[01]=63.0320 Asic[02]=57.9480 Asic[03]=62.3940 Asic[04]=62.4950 Asic[05]=65.9840 Asic[06]=69.6750 Asic[07]=66.3030 Asic[08]=64.4740
Asic[09]=68.9710 Asic[10]=61.8400 Asic[11]=65.0950 Asic[12]=69.3900 Asic[13]=67.4770 Asic[14]=62.2930 Asic[15]=62.5450 Asic[16]=63.9710
Asic[17]=62.6960 Asic[18]=70.7490
[color=red]get RT hashrate from Chain[11]: (asic index start from 1-18)
Asic[01]=66.9570 Asic[02]=32.5640 [/b][/color]
get RT hashrate from Chain[12]: (asic index start from 1-18)
Asic[01]=62.7300 Asic[02]=61.9580 Asic[03]=66.1690 Asic[04]=64.8100 Asic[05]=64.9610 Asic[06]=62.7800 Asic[07]=67.4770 Asic[08]=68.5850
Asic[09]=62.0080 Asic[10]=68.5510 Asic[11]=67.1920 Asic[12]=63.6020 Asic[13]=67.7960 Asic[14]=58.7530 Asic[15]=64.6250 Asic[16]=68.9870
Asic[17]=63.6690 Asic[18]=66.8570
get RT hashrate from Chain[13]: (asic index start from 1-18)
Asic[01]=67.5110 Asic[02]=60.3300 Asic[03]=61.6730 Asic[04]=63.5350 Asic[05]=68.7690 Asic[06]=68.9870 Asic[07]=63.7700 Asic[08]=60.2970
Asic[09]=66.1690 Asic[10]=64.2390 Asic[11]=68.5680 Asic[12]=64.0720 Asic[13]=63.0320 Asic[14]=65.0780 Asic[15]=68.7190 Asic[16]=66.8060
Asic[17]=63.0990 Asic[18]=60.4650
Check Chain[J2] ASIC RT error: (asic index start from 1-18)
Check Chain[J3] ASIC RT error: (asic index start from 1-18)
Check Chain[J4] ASIC RT error: (asic index start from 1-18)
Check Chain[J9] ASIC RT error: (asic index start from 1-18)
Check Chain[J10] ASIC RT error: (asic index start from 1-18)
Check Chain[J11] ASIC RT error: (asic index start from 1-18)
Check Chain[J12] ASIC RT error: (asic index start from 1-18)
Check Chain[J13] ASIC RT error: (asic index start from 1-18)
Check Chain[J14] ASIC RT error: (asic index start from 1-18)
Done check_asic_reg
do read temp on Chain[8]
Chain[8] Chip[1] TempTypeID=41 middle offset=32
Chain[8] Chip[1] local Temp=61
Chain[8] Chip[1] middle Temp=72
Special fix Chain[8] Chip[1] middle Temp = 76
Done read temp on Chain[8]
do read temp on Chain[10]
Chain[10] Chip[1] TempTypeID=41 middle offset=32
Chain[10] Chip[1] local Temp=55
Chain[10] Chip[1] middle Temp=60
Special fix Chain[10] Chip[1] middle Temp = 70
Done read temp on Chain[10]
do read temp on Chain[12]
Chain[12] Chip[1] TempTypeID=41 middle offset=30
Chain[12] Chip[1] local Temp=60
Chain[12] Chip[1] middle Temp=72
Special fix Chain[12] Chip[1] middle Temp = 75
Done read temp on Chain[12]
set FAN speed according to: temp_highest=61 temp_top1[PWM_T]=61 temp_top1[TEMP_POS_LOCAL]=61 temp_change=1 fix_fan_steps=0
FAN PWM: 70
read_temp_func Done!
CRC error counter=2121
[ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000310] ps7-ttc #0 at df804000, irq=43
[ 0.000621] Console: colour dummy device 80x30
[ 0.000652] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040209] pid_max: default: 32768 minimum: 301
[ 0.040437] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040455] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042642] CPU: Testing write buffer coherency: ok
[ 0.042988] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043049] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[ 0.043270] L310 cache controller enabled
[ 0.043290] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121038] CPU1: Booted secondary processor
[ 0.210227] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210361] Brought up 2 CPUs
[ 0.210380] SMP: Total of 2 processors activated.
[ 0.210389] CPU: All CPU(s) started in SVC mode.
[ 0.211085] devtmpfs: initialized
[ 0.213494] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214743] regulator-dummy: no parameters
[ 0.223714] NET: Registered protocol family 16
[ 0.226028] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.228343] cpuidle: using governor ladder
[ 0.228356] cpuidle: using governor menu
[ 0.235847] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237356] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237370] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237479] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.259711] bio: create slab
[ 0.261714] vgaarb: loaded
[ 0.262443] SCSI subsystem initialized
[ 0.263343] usbcore: registered new interface driver usbfs
[ 0.263518] usbcore: registered new interface driver hub
[ 0.263742] usbcore: registered new device driver usb
[ 0.264273] media: Linux media interface: v0.10
[ 0.264430] Linux video capture interface: v2.00
[ 0.264678] pps_core: LinuxPPS API ver. 1 registered
[ 0.264690] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.264816] PTP clock support registered
[ 0.265183] EDAC MC: Ver: 3.0.0
[ 0.266238] Advanced Linux Sound Architecture Driver Initialized.
[ 0.269216] DMA-API: preallocated 4096 debug entries
[ 0.269230] DMA-API: debugging enabled by kernel config
[ 0.269318] Switched to clocksource arm_global_timer
[ 0.290495] NET: Registered protocol family 2
[ 0.291190] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.291247] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.291333] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.291384] TCP: reno registered
[ 0.291403] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291437] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291693] NET: Registered protocol family 1
[ 0.292028] RPC: Registered named UNIX socket transport module.
[ 0.292040] RPC: Registered udp transport module.
[ 0.292049] RPC: Registered tcp transport module.
[ 0.292057] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.292071] PCI: CLS 0 bytes, default 64
[ 0.292534] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.294594] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.296781] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.296974] msgmni has been set to 967
[ 0.297768] io scheduler noop registered
[ 0.297781] io scheduler deadline registered
[ 0.297823] io scheduler cfq registered (default)
[ 0.306774] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.306795] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.432479] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.000016] console [ttyPS0] enabled
[ 1.004299] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.011953] [drm] Initialized drm 1.1.0 20060810
[ 1.029111] brd: module loaded
[ 1.038544] loop: module loaded
[ 1.048073] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.054086] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.062033] libphy: XEMACPS mii bus: probed
[ 1.066402] ------------- phy_id = 0x3625e62
[ 1.071398] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.080077] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.086700] ehci-pci: EHCI PCI platform driver
[ 1.093998] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.100840] usbcore: registered new interface driver usb-storage
[ 1.107687] mousedev: PS/2 mouse device common for all mice
[ 1.113837] i2c /dev entries driver
[ 1.120753] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.126242] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.132178] Xilinx Zynq CpuIdle Driver started
[ 1.137046] sdhci: Secure Digital Host Controller Interface driver
[ 1.143220] sdhci: Copyright(c) Pierre Ossman
[ 1.147488] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.154315] mmc0: no vqmmc regulator found
[ 1.158333] mmc0: no vmmc regulator found
[ 1.199341] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.208022] usbcore: registered new interface driver usbhid
[ 1.213532] usbhid: USB HID core driver
[ 1.218243] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.224541] nand: Micron MT29F2G08ABAEAWP
[ 1.228511] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.234453] Bad block table found at page 131008, version 0x01
[ 1.240677] Bad block table found at page 130944, version 0x01
[ 1.246734] 3 ofpart partitions found on MTD device pl353-nand
[ 1.252517] Creating 3 MTD partitions on "pl353-nand":
[ 1.257610] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.265708] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.273066] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.282090] TCP: cubic registered
[ 1.285331] NET: Registered protocol family 17
[ 1.290060] Registering SWP/SWPB emulation handler
[ 1.295944] regulator-dummy: disabling
[ 1.300318] UBI: attaching mtd1 to ubi0
[ 1.828083] UBI: scanning is finished
[ 1.839743] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.846795] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.853583] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.860267] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.867105] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.873115] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.880226] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 862493722
[ 1.889153] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.898384] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.898392] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.914648] ALSA device list:
[ 1.917535] No soundcards found.
[ 1.922945] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.983287] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.989213] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.998360] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.008237] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.013273] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 2A24A8E1-2021-4A54-8A4E-D8E294AE00E5, small LPT model
[ 2.024838] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.031824] devtmpfs: mounted
[ 2.034937] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.880191] random: dd urandom read with 0 bits of entropy available
[ 3.279340]
[ 3.279340] bcm54xx_config_init
[ 3.889356]
[ 3.889356] bcm54xx_config_init
[ 7.890186] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.896292] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 23.049192] In axi fpga driver!
[ 23.052260] request_mem_region OK!
[ 23.055651] AXI fpga dev virtual address is 0xdf9fc000
[ 23.060789] *base_vir_addr = 0xc510
[ 23.075999] In fpga mem driver!
[ 23.079175] request_mem_region OK!
[ 23.082679] fpga mem virtual address is 0xe2000000
[ 23.888571]
[ 23.888571] bcm54xx_config_init
[ 24.518464]
[ 24.518464] bcm54xx_config_init
[ 28.518791] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 28.524896] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 1206.365243] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=8000c510
miner ID : 805c6dc46880881c
Miner Type = T9+
AsicType = 1387
real AsicNum = 18
use critical mode to search freq...
get PLUG ON=0x07003f0e
Find hashboard on Chain[1]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
Find hashboard on Chain[8]
Find hashboard on Chain[9]
Find hashboard on Chain[10]
Find hashboard on Chain[11]
Find hashboard on Chain[12]
Find hashboard on Chain[13]
set_reset_allhashboard = 0x0000ffff
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x90
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x90
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x11 0x11 0x11 0x10 0x16 0x10 0x21 0x12 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x15 0x10 0x32 0x20 0x20 0x10 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x11 0x11 0x11 0x11 0x10 0x11 0x00 0x11 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[1] has freq in PIC and will jump over...
Chain[1] has core num in PIC
Chain[1] ASIC[0] has core num=1
Chain[1] ASIC[1] has core num=1
Chain[1] ASIC[2] has core num=1
Chain[1] ASIC[3] has core num=1
Chain[1] ASIC[4] has core num=1
Chain[1] ASIC[5] has core num=1
Chain[1] ASIC[6] has core num=1
Chain[1] ASIC[7] has core num=1
Chain[1] ASIC[8] has core num=1
Chain[1] ASIC[10] has core num=1
Chain[1] ASIC[11] has core num=6
Chain[1] ASIC[12] has core num=1
Chain[1] ASIC[14] has core num=2
Chain[1] ASIC[15] has core num=1
Chain[1] ASIC[16] has core num=1
Chain[1] ASIC[17] has core num=2
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x10 0x10 0x01 0x02 0x11 0x11 0x12 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x01 0x01 0x02 0x11 0x10 0x11 0x10 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x20 0x11 0x12 0x01 0x01 0x01 0x01 0x11 0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[2] has freq in PIC and will jump over...
Chain[2] has core num in PIC
Chain[2] ASIC[2] has core num=1
Chain[2] ASIC[4] has core num=1
Chain[2] ASIC[7] has core num=1
Chain[2] ASIC[9] has core num=2
Chain[2] ASIC[10] has core num=1
Chain[2] ASIC[11] has core num=1
Chain[2] ASIC[12] has core num=1
Chain[2] ASIC[13] has core num=1
Chain[2] ASIC[14] has core num=1
Chain[2] ASIC[15] has core num=2
Chain[2] ASIC[16] has core num=1
Chain[2] ASIC[17] has core num=1
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x01 0x13 0x22 0x21 0x23 0x10 0x02 0x10 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x15 0x11 0x11 0x00 0x00 0x01 0x11 0x11 0x21 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x20 0x10 0x00 0x03 0x01 0x31 0x01 0x00 0x18 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[3] has freq in PIC and will jump over...
Chain[3] has core num in PIC
Chain[3] ASIC[1] has core num=1
Chain[3] ASIC[2] has core num=1
Chain[3] ASIC[3] has core num=3
Chain[3] ASIC[4] has core num=2
Chain[3] ASIC[5] has core num=2
Chain[3] ASIC[6] has core num=2
Chain[3] ASIC[7] has core num=1
Chain[3] ASIC[8] has core num=2
Chain[3] ASIC[9] has core num=3
Chain[3] ASIC[10] has core num=1
Chain[3] ASIC[13] has core num=2
Chain[3] ASIC[14] has core num=1
Chain[3] ASIC[16] has core num=1
Chain[3] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[8] has freq in PIC and will jump over...
Chain[8] has core num in PIC
Chain[8] ASIC[0] has core num=1
Chain[8] ASIC[1] has core num=1
Chain[8] ASIC[2] has core num=1
Chain[8] ASIC[3] has core num=5
Chain[8] ASIC[4] has core num=1
Chain[8] ASIC[6] has core num=3
Chain[8] ASIC[7] has core num=2
Chain[8] ASIC[8] has core num=2
Chain[8] ASIC[10] has core num=2
Chain[8] ASIC[12] has core num=1
has freq in PIC, will disable freq setting.
chain[9] has freq in PIC and will jump over...
Chain[9] has core num in PIC
Chain[9] ASIC[0] has core num=1
Chain[9] ASIC[1] has core num=1
Chain[9] ASIC[2] has core num=1
Chain[9] ASIC[3] has core num=1
Chain[9] ASIC[4] has core num=1
Chain[9] ASIC[5] has core num=1
Chain[9] ASIC[6] has core num=1
Chain[9] ASIC[7] has core num=1
Chain[9] ASIC[8] has core num=1
Chain[9] ASIC[9] has core num=1
Chain[9] ASIC[10] has core num=1
Chain[9] ASIC[12] has core num=1
Chain[9] ASIC[13] has core num=1
Chain[9] ASIC[16] has core num=1
Chain[9] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[10] has freq in PIC and will jump over...
Chain[10] has core num in PIC
Chain[10] ASIC[0] has core num=1
Chain[10] ASIC[1] has core num=1
Chain[10] ASIC[3] has core num=1
Chain[10] ASIC[5] has core num=1
Chain[10] ASIC[7] has core num=2
Chain[10] ASIC[8] has core num=1
Chain[10] ASIC[9] has core num=1
Chain[10] ASIC[10] has core num=1
Chain[10] ASIC[12] has core num=1
Chain[10] ASIC[13] has core num=1
Chain[10] ASIC[14] has core num=1
Chain[10] ASIC[16] has core num=1
Chain[10] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[11] has freq in PIC and will jump over...
Chain[11] has core num in PIC
Chain[11] ASIC[0] has core num=2
Chain[11] ASIC[2] has core num=1
Chain[11] ASIC[3] has core num=1
Chain[11] ASIC[4] has core num=1
Chain[11] ASIC[5] has core num=2
Chain[11] ASIC[7] has core num=1
Chain[11] ASIC[9] has core num=1
Chain[11] ASIC[11] has core num=1
Chain[11] ASIC[13] has core num=1
Chain[11] ASIC[14] has core num=1
Chain[11] ASIC[15] has core num=1
Chain[11] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[12] has freq in PIC and will jump over...
Chain[12] has core num in PIC
Chain[12] ASIC[0] has core num=1
Chain[12] ASIC[1] has core num=5
Chain[12] ASIC[2] has core num=1
Chain[12] ASIC[3] has core num=1
Chain[12] ASIC[4] has core num=1
Chain[12] ASIC[5] has core num=1
Chain[12] ASIC[11] has core num=1
Chain[12] ASIC[12] has core num=1
Chain[12] ASIC[13] has core num=1
Chain[12] ASIC[14] has core num=1
Chain[12] ASIC[15] has core num=1
Chain[12] ASIC[16] has core num=2
Chain[12] ASIC[17] has core num=1
has freq in PIC, will disable freq setting.
chain[13] has freq in PIC and will jump over...
Chain[13] has core num in PIC
Chain[13] ASIC[0] has core num=2
Chain[13] ASIC[2] has core num=1
Chain[13] ASIC[7] has core num=3
Chain[13] ASIC[9] has core num=1
Chain[13] ASIC[10] has core num=3
Chain[13] ASIC[11] has core num=1
Chain[13] ASIC[13] has core num=1
Chain[13] ASIC[16] has core num=1
Chain[13] ASIC[17] has core num=8
get PIC voltage=11 on chain[1], value=870
get PIC voltage=11 on chain[2], value=870
get PIC voltage=11 on chain[3], value=870
get PIC voltage=11 on chain[8], value=870
get PIC voltage=11 on chain[9], value=870
get PIC voltage=11 on chain[10], value=870
get PIC voltage=11 on chain[11], value=870
get PIC voltage=11 on chain[12], value=870
get PIC voltage=11 on chain[13], value=870
set_reset_allhashboard = 0x00000000
chain[8] temp offset record: 1,1,0,0,0,0,33,28
chain[8] temp chip I2C addr=0x98
chain[10] temp offset record: 1,2,0,0,0,0,33,28
chain[10] temp chip I2C addr=0x98
chain[12] temp offset record: 1,-1,0,0,0,0,33,28
chain[12] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 9, total chain num = 9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1401 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = T9+
Miner compile time: Fri Nov 24 23:19:16 EST 2017 type: Antminer T9+set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 805c6dc46880881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[5] speed=5760
get fan[2] speed=5880
get fan[5] speed=5760
get fan[2] speed=5880
get fan[5] speed=5760
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x90
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x11 0x11 0x11 0x10 0x16 0x10 0x21 0x12 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x15 0x10 0x32 0x20 0x20 0x10 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x11 0x11 0x11 0x11 0x10 0x11 0x00 0x11 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J2] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J2] test patten OK temp=-1
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x90
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x10 0x10 0x01 0x02 0x11 0x11 0x12 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x01 0x01 0x02 0x11 0x10 0x11 0x10 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x20 0x11 0x12 0x01 0x01 0x01 0x01 0x11 0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J3] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J3] test patten OK temp=-1
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3f 0x57 0x00 0xff 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x3f 0x01 0x13 0x22 0x21 0x23 0x10 0x02 0x10 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x15 0x11 0x11 0x00 0x00 0x01 0x11 0x11 0x21 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x20 0x10 0x00 0x03 0x01 0x31 0x01 0x00 0x18 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J4] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J4] test patten OK temp=-1
Chain[J9] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J9] test patten OK temp=-1
Chain[J10] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J10] test patten OK temp=-1
Chain[J11] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J11] test patten OK temp=-1
Chain[J12] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J12] test patten OK temp=-1
Chain[J13] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J13] test patten OK temp=-1
Chain[J14] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J14] test patten OK temp=-1
Chain[J2] will use voltage=930 [1] to open core
Chain[J3] will use voltage=930 [1] to open core
Chain[J4] will use voltage=930 [1] to open core
Chain[J9] will use voltage=930 [1] to open core
Chain[J10] will use voltage=930 [1] to open core
Chain[J11] will use voltage=930 [1] to open core
Chain[J12] will use voltage=930 [1] to open core
Chain[J13] will use voltage=930 [1] to open core
Chain[J14] will use voltage=930 [1] to open core
Chain[J2] orignal chain_voltage_pic=11 value=870
Chain[J3] orignal chain_voltage_pic=11 value=870
Chain[J4] orignal chain_voltage_pic=11 value=870
Chain[J9] orignal chain_voltage_pic=1 value=930
Chain[J9] will use backup chain_voltage_pic=870 [11]
Chain[J9] get working chain_voltage_pic=11
Chain[J10] orignal chain_voltage_pic=1 value=930
Chain[J10] will use backup chain_voltage_pic=870 [11]
Chain[J10] get working chain_voltage_pic=11
Chain[J11] orignal chain_voltage_pic=1 value=930
Chain[J11] will use backup chain_voltage_pic=870 [11]
Chain[J11] get working chain_voltage_pic=11
Chain[J12] orignal chain_voltage_pic=1 value=930
Chain[J12] will use backup chain_voltage_pic=870 [11]
Chain[J12] get working chain_voltage_pic=11
Chain[J13] orignal chain_voltage_pic=1 value=930
Chain[J13] will use backup chain_voltage_pic=870 [11]
Chain[J13] get working chain_voltage_pic=11
Chain[J14] orignal chain_voltage_pic=1 value=930
Chain[J14] will use backup chain_voltage_pic=870 [11]
Chain[J14] get working chain_voltage_pic=11
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 1 time
Chain[J2] has 18 asic
Chain[J3] has 18 asic
Chain[J4] has 18 asic
Chain[J9] has 18 asic
Chain[J10] has 18 asic
Chain[J11] has 18 asic
Chain[J12] has 18 asic
Chain[J13] has 18 asic
Chain[J14] has 18 asic
Chain[J2] has core num in PIC
Chain[J2] ASIC[0] has core num=1
Chain[J2] ASIC[1] has core num=1
Chain[J2] ASIC[2] has core num=1
Chain[J2] ASIC[3] has core num=1
Chain[J2] ASIC[4] has core num=1
Chain[J2] ASIC[5] has core num=1
Chain[J2] ASIC[6] has core num=1
Chain[J2] ASIC[7] has core num=1
Chain[J2] ASIC[8] has core num=1
Chain[J2] ASIC[10] has core num=1
Chain[J2] ASIC[11] has core num=6
Chain[J2] ASIC[12] has core num=1
Chain[J2] ASIC[14] has core num=2
Chain[J2] ASIC[15] has core num=1
Chain[J2] ASIC[16] has core num=1
Chain[J2] ASIC[17] has core num=2
Chain[J3] has core num in PIC
Chain[J3] ASIC[2] has core num=1
Chain[J3] ASIC[4] has core num=1
Chain[J3] ASIC[7] has core num=1
Chain[J3] ASIC[9] has core num=2
Chain[J3] ASIC[10] has core num=1
Chain[J3] ASIC[11] has core num=1
Chain[J3] ASIC[12] has core num=1
Chain[J3] ASIC[13] has core num=1
Chain[J3] ASIC[14] has core num=1
Chain[J3] ASIC[15] has core num=2
Chain[J3] ASIC[16] has core num=1
Chain[J3] ASIC[17] has core num=1
Chain[J4] has core num in PIC
Chain[J4] ASIC[1] has core num=1
Chain[J4] ASIC[2] has core num=1
Chain[J4] ASIC[3] has core num=3
Chain[J4] ASIC[4] has core num=2
Chain[J4] ASIC[5] has core num=2
Chain[J4] ASIC[6] has core num=2
Chain[J4] ASIC[7] has core num=1
Chain[J4] ASIC[8] has core num=2
Chain[J4] ASIC[9] has core num=3
Chain[J4] ASIC[10] has core num=1
Chain[J4] ASIC[13] has core num=2
Chain[J4] ASIC[14] has core num=1
Chain[J4] ASIC[16] has core num=1
Chain[J4] ASIC[17] has core num=1
Chain[J9] has core num in PIC
Chain[J9] ASIC[0] has core num=1
Chain[J9] ASIC[1] has core num=1
Chain[J9] ASIC[2] has core num=1
Chain[J9] ASIC[3] has core num=5
Chain[J9] ASIC[4] has core num=1
Chain[J9] ASIC[6] has core num=3
Chain[J9] ASIC[7] has core num=2
Chain[J9] ASIC[8] has core num=2
Chain[J9] ASIC[10] has core num=2
Chain[J9] ASIC[12] has core num=1
Chain[J10] has core num in PIC
Chain[J10] ASIC[0] has core num=1
Chain[J10] ASIC[1] has core num=1
Chain[J10] ASIC[2] has core num=1
Chain[J10] ASIC[3] has core num=1
Chain[J10] ASIC[4] has core num=1
Chain[J10] ASIC[5] has core num=1
Chain[J10] ASIC[6] has core num=1
Chain[J10] ASIC[7] has core num=1
Chain[J10] ASIC[8] has core num=1
Chain[J10] ASIC[9] has core num=1
Chain[J10] ASIC[10] has core num=1
Chain[J10] ASIC[12] has core num=1
Chain[J10] ASIC[13] has core num=1
Chain[J10] ASIC[16] has core num=1
Chain[J10] ASIC[17] has core num=1
Chain[J11] has core num in PIC
Chain[J11] ASIC[0] has core num=1
Chain[J11] ASIC[1] has core num=1
Chain[J11] ASIC[3] has core num=1
Chain[J11] ASIC[5] has core num=1
Chain[J11] ASIC[7] has core num=2
Chain[J11] ASIC[8] has core num=1
Chain[J11] ASIC[9] has core num=1
Chain[J11] ASIC[10] has core num=1
Chain[J11] ASIC[12] has core num=1
Chain[J11] ASIC[13] has core num=1
Chain[J11] ASIC[14] has core num=1
Chain[J11] ASIC[16] has core num=1
Chain[J11] ASIC[17] has core num=1
Chain[J12] has core num in PIC
Chain[J12] ASIC[0] has core num=2
Chain[J12] ASIC[2] has core num=1
Chain[J12] ASIC[3] has core num=1
Chain[J12] ASIC[4] has core num=1
Chain[J12] ASIC[5] has core num=2
Chain[J12] ASIC[7] has core num=1
Chain[J12] ASIC[9] has core num=1
Chain[J12] ASIC[11] has core num=1
Chain[J12] ASIC[13] has core num=1
Chain[J12] ASIC[14] has core num=1
Chain[J12] ASIC[15] has core num=1
Chain[J12] ASIC[17] has core num=1
Chain[J13] has core num in PIC
Chain[J13] ASIC[0] has core num=1
Chain[J13] ASIC[1] has core num=5
Chain[J13] ASIC[2] has core num=1
Chain[J13] ASIC[3] has core num=1
Chain[J13] ASIC[4] has core num=1
Chain[J13] ASIC[5] has core num=1
Chain[J13] ASIC[11] has core num=1
Chain[J13] ASIC[12] has core num=1
Chain[J13] ASIC[13] has core num=1
Chain[J13] ASIC[14] has core num=1
Chain[J13] ASIC[15] has core num=1
Chain[J13] ASIC[16] has core num=2
Chain[J13] ASIC[17] has core num=1
Chain[J14] has core num in PIC
Chain[J14] ASIC[0] has core num=2
Chain[J14] ASIC[2] has core num=1
Chain[J14] ASIC[7] has core num=3
Chain[J14] ASIC[9] has core num=1
Chain[J14] ASIC[10] has core num=3
Chain[J14] ASIC[11] has core num=1
Chain[J14] ASIC[13] has core num=1
Chain[J14] ASIC[16] has core num=1
Chain[J14] ASIC[17] has core num=8
miner total rate=10538GH/s fixed rate=10500GH/s
read PIC voltage=930 on chain[1]
Chain:1 chipnum=18
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:1 max freq=575
Chain:1 min freq=575
read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:2 max freq=575
Chain:2 min freq=575
read PIC voltage=930 on chain[3]
Chain:3 chipnum=18
Chain[J4] voltage added=0.0V
Chain:3 base freq=581
Asic[ 0]:581
Asic[ 1]:581 Asic[ 2]:581 Asic[ 3]:581 Asic[ 4]:581 Asic[ 5]:581 Asic[ 6]:581 Asic[ 7]:581 Asic[ 8]:581
Asic[ 9]:581 Asic[10]:581 Asic[11]:581 Asic[12]:581 Asic[13]:581 Asic[14]:581 Asic[15]:581 Asic[16]:581
Asic[17]:581
Chain:3 max freq=581
Chain:3 min freq=581
read PIC voltage=930 on chain[8]
Chain:8 chipnum=18
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:8 max freq=575
Chain:8 min freq=575
read PIC voltage=930 on chain[9]
Chain:9 chipnum=18
Chain[J10] voltage added=0.0V
Chain:9 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:9 max freq=575
Chain:9 min freq=575
read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:10 max freq=575
Chain:10 min freq=575
read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:11 max freq=575
Chain:11 min freq=575
read PIC voltage=930 on chain[12]
Chain:12 chipnum=18
Chain[J13] voltage added=0.0V
Chain:12 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:12 max freq=575
Chain:12 min freq=575
read PIC voltage=930 on chain[13]
Chain:13 chipnum=18
Chain[J14] voltage added=0.0V
Chain:13 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:13 max freq=575
Chain:13 min freq=575
Miner fix freq ...
read PIC voltage=930 on chain[1]
Chain:1 chipnum=18
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:1 max freq=575
Chain:1 min freq=575
read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:2 max freq=575
Chain:2 min freq=575
read PIC voltage=930 on chain[3]
Chain:3 chipnum=18
Chain[J4] voltage added=0.0V
Chain:3 base freq=581
Asic[ 0]:581
Asic[ 1]:581 Asic[ 2]:581 Asic[ 3]:581 Asic[ 4]:581 Asic[ 5]:581 Asic[ 6]:581 Asic[ 7]:581 Asic[ 8]:581
Asic[ 9]:581 Asic[10]:581 Asic[11]:581 Asic[12]:581 Asic[13]:581 Asic[14]:581 Asic[15]:581 Asic[16]:581
Asic[17]:581
Chain:3 max freq=581
Chain:3 min freq=581
read PIC voltage=930 on chain[8]
Chain:8 chipnum=18
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:8 max freq=575
Chain:8 min freq=575
read PIC voltage=930 on chain[9]
Chain:9 chipnum=18
Chain[J10] voltage added=0.0V
Chain:9 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:9 max freq=575
Chain:9 min freq=575
read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:10 max freq=575
Chain:10 min freq=575
read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:11 max freq=575
Chain:11 min freq=575
read PIC voltage=930 on chain[12]
Chain:12 chipnum=18
Chain[J13] voltage added=0.0V
Chain:12 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:12 max freq=575
Chain:12 min freq=575
read PIC voltage=930 on chain[13]
Chain:13 chipnum=18
Chain[J14] voltage added=0.0V
Chain:13 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:13 max freq=575
Chain:13 min freq=575
max freq = 581
set baud=1
Chain[J9] PIC temp offset=1,1,0,0,0,0,33,28
chain[8] temp chip I2C addr=0x98
Chain[J9] chip[0] use PIC middle temp offset=1 typeID=41
New offset Chain[8] chip[0] local:25 remote:23 offset:32
Chain[J9] chip[0] get middle temp offset=32 typeID=41
Chain[J11] PIC temp offset=1,2,0,0,0,0,33,28
chain[10] temp chip I2C addr=0x98
Chain[J11] chip[0] use PIC middle temp offset=2 typeID=41
New offset Chain[10] chip[0] local:25 remote:23 offset:32
Chain[J11] chip[0] get middle temp offset=32 typeID=41
Chain[J13] PIC temp offset=1,-1,0,0,0,0,33,28
chain[12] temp chip I2C addr=0x98
Chain[J13] chip[0] use PIC middle temp offset=-1 typeID=41
New offset Chain[12] chip[0] local:25 remote:25 offset:30
Chain[J13] chip[0] get middle temp offset=30 typeID=41
single board rate=1166 voltage limit=870 on chain[1]
get PIC voltage=870 on chain[1], check: must be < 870
single board rate=1171 voltage limit=870 on chain[2]
get PIC voltage=870 on chain[2], check: must be < 870
single board rate=1178 voltage limit=870 on chain[3]
get PIC voltage=870 on chain[3], check: must be < 870
single board rate=1168 voltage limit=870 on chain[8]
get PIC voltage=870 on chain[8], check: must be < 870
single board rate=1171 voltage limit=870 on chain[9]
get PIC voltage=870 on chain[9], check: must be < 870
single board rate=1171 voltage limit=870 on chain[10]
get PIC voltage=870 on chain[10], check: must be < 870
single board rate=1171 voltage limit=870 on chain[11]
get PIC voltage=870 on chain[11], check: must be < 870
single board rate=1169 voltage limit=870 on chain[12]
get PIC voltage=870 on chain[12], check: must be < 870
single board rate=1167 voltage limit=870 on chain[13]
get PIC voltage=870 on chain[13], check: must be < 870
open core on chain[1] [8] [9]...
set voltage=870 on chain[1], the real voltage=870
Chain[J2] set working voltage=870 [11]
open core on chain[2] [10] [11]...
set voltage=870 on chain[2], the real voltage=870
Chain[J3] set working voltage=870 [11]
open core on chain[3] [12] [13]...
set voltage=870 on chain[3], the real voltage=870
Chain[J4] set working voltage=870 [11]
setStartTimePoint total_tv_start_sys=144 total_tv_end_sys=145
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[1]: (asic index start from 1-18)
Asic[01]=59.9780 Asic[02]=68.5510 Asic[03]=62.1760 Asic[04]=63.7860 Asic[05]=65.9170 Asic[06]=61.9410 Asic[07]=65.4140 Asic[08]=61.4710
Asic[09]=56.6390 Asic[10]=65.1620 Asic[11]=61.8740 Asic[12]=62.7630 Asic[13]=62.7800 Asic[14]=61.5550 Asic[15]=65.8500 Asic[16]=68.3500
Asic[17]=62.0750 Asic[18]=61.3870
get RT hashrate from Chain[2]: (asic index start from 1-18)
[color=red][b]Asic[01]=0.00000 Asic[02]=0.00000 [/b][/color]Asic[03]=66.2530 Asic[04]=68.8200 Asic[05]=66.9410 Asic[06]=65.1290 Asic[07]=63.2660 Asic[08]=65.7160
Asic[09]=64.0380 Asic[10]=60.4310 Asic[11]=59.9280 Asic[12]=68.4840 Asic[13]=65.0450 Asic[14]=68.8030 Asic[15]=63.8540 Asic[16]=67.0920
Asic[17]=61.0350 Asic[18]=64.4740
get RT hashrate from Chain[3]: (asic index start from 1-18)
Asic[01]=66.1690 Asic[02]=66.7560 Asic[03]=67.2090 Asic[04]=67.6790 Asic[05]=67.7460 Asic[06]=63.2160 Asic[07]=64.4740 Asic[08]=63.0320
Asic[09]=67.6960 Asic[10]=64.8430 Asic[11]=62.9480 Asic[12]=63.1660 Asic[13]=67.6450 Asic[14]=62.9310 Asic[15]=66.7220 Asic[16]=68.8360
Asic[17]=65.9680 Asic[18]=65.6990
get RT hashrate from Chain[8]: (asic index start from 1-18)
Asic[01]=68.3160 Asic[02]=66.3870 Asic[03]=66.7060 Asic[04]=68.6020 Asic[05]=68.2660 Asic[06]=66.7730 Asic[07]=63.0820 Asic[08]=66.9070
Asic[09]=63.3330 Asic[10]=65.0620 Asic[11]=61.0010 Asic[12]=64.1390 Asic[13]=66.2190 Asic[14]=65.7330 Asic[15]=68.1820 Asic[16]=66.3030
Asic[17]=67.4770 Asic[18]=61.7560
get RT hashrate from Chain[9]: (asic index start from 1-18)
Asic[01]=65.8840 Asic[02]=69.0210 Asic[03]=65.4140 Asic[04]=65.8000 Asic[05]=67.1080 Asic[06]=64.7260 Asic[07]=65.5820 Asic[08]=62.4610
Asic[09]=65.3800 Asic[10]=69.2890 Asic[11]=68.3000 Asic[12]=60.4140 Asic[13]=64.2730 Asic[14]=61.3200 Asic[15]=62.8300 Asic[16]=63.7700
Asic[17]=68.5180 Asic[18]=67.4610
get RT hashrate from Chain[10]: (asic index start from 1-18)
Asic[01]=63.0320 Asic[02]=57.9480 Asic[03]=62.3940 Asic[04]=62.4950 Asic[05]=65.9840 Asic[06]=69.6750 Asic[07]=66.3030 Asic[08]=64.4740
Asic[09]=68.9710 Asic[10]=61.8400 Asic[11]=65.0950 Asic[12]=69.3900 Asic[13]=67.4770 Asic[14]=62.2930 Asic[15]=62.5450 Asic[16]=63.9710
Asic[17]=62.6960 Asic[18]=70.7490
[color=red]get RT hashrate from Chain[11]: (asic index start from 1-18)
Asic[01]=66.9570 Asic[02]=32.5640 [/b][/color]
get RT hashrate from Chain[12]: (asic index start from 1-18)
Asic[01]=62.7300 Asic[02]=61.9580 Asic[03]=66.1690 Asic[04]=64.8100 Asic[05]=64.9610 Asic[06]=62.7800 Asic[07]=67.4770 Asic[08]=68.5850
Asic[09]=62.0080 Asic[10]=68.5510 Asic[11]=67.1920 Asic[12]=63.6020 Asic[13]=67.7960 Asic[14]=58.7530 Asic[15]=64.6250 Asic[16]=68.9870
Asic[17]=63.6690 Asic[18]=66.8570
get RT hashrate from Chain[13]: (asic index start from 1-18)
Asic[01]=67.5110 Asic[02]=60.3300 Asic[03]=61.6730 Asic[04]=63.5350 Asic[05]=68.7690 Asic[06]=68.9870 Asic[07]=63.7700 Asic[08]=60.2970
Asic[09]=66.1690 Asic[10]=64.2390 Asic[11]=68.5680 Asic[12]=64.0720 Asic[13]=63.0320 Asic[14]=65.0780 Asic[15]=68.7190 Asic[16]=66.8060
Asic[17]=63.0990 Asic[18]=60.4650
Check Chain[J2] ASIC RT error: (asic index start from 1-18)
Check Chain[J3] ASIC RT error: (asic index start from 1-18)
Check Chain[J4] ASIC RT error: (asic index start from 1-18)
Check Chain[J9] ASIC RT error: (asic index start from 1-18)
Check Chain[J10] ASIC RT error: (asic index start from 1-18)
Check Chain[J11] ASIC RT error: (asic index start from 1-18)
Check Chain[J12] ASIC RT error: (asic index start from 1-18)
Check Chain[J13] ASIC RT error: (asic index start from 1-18)
Check Chain[J14] ASIC RT error: (asic index start from 1-18)
Done check_asic_reg
do read temp on Chain[8]
Chain[8] Chip[1] TempTypeID=41 middle offset=32
Chain[8] Chip[1] local Temp=61
Chain[8] Chip[1] middle Temp=72
Special fix Chain[8] Chip[1] middle Temp = 76
Done read temp on Chain[8]
do read temp on Chain[10]
Chain[10] Chip[1] TempTypeID=41 middle offset=32
Chain[10] Chip[1] local Temp=55
Chain[10] Chip[1] middle Temp=60
Special fix Chain[10] Chip[1] middle Temp = 70
Done read temp on Chain[10]
do read temp on Chain[12]
Chain[12] Chip[1] TempTypeID=41 middle offset=30
Chain[12] Chip[1] local Temp=60
Chain[12] Chip[1] middle Temp=72
Special fix Chain[12] Chip[1] middle Temp = 75
Done read temp on Chain[12]
set FAN speed according to: temp_highest=61 temp_top1[PWM_T]=61 temp_top1[TEMP_POS_LOCAL]=61 temp_change=1 fix_fan_steps=0
FAN PWM: 70
read_temp_func Done!
CRC error counter=2121
Moderator's note: This post was edited by frodocooper to add code tags.
Jump to: