Bitcoin Forum>Bitcoin>Mining>Mining support
Author

Topic: Antminer T9+ Problem I beg you to help. ( Fixed --- and fixed firmware url probl (Read 613 times)

Lunko11
newbie
Activity: 6
Merit: 0
Antminer T9+ Problem I beg you to help. ( Fixed --- and fixed firmware url probl
February 09, 2018, 03:47:00 AM
#11
Fixed the problem

The URL of the firmware is written incorrectly


https://file.bitmain.com/shop-file-server/firmwares/Antminer%20T9+/Firmware/00720180209143644817e9j6NQuj06BF/Antminer-T9-PLUS-all-201711242319-autofreq-user-Update2UBI-NF.tar.gz

is the original url

https://file.bitmain.com/shop-file-server/firmwares/Antminer%20T9%2B/Firmware/00720180209143644817e9j6NQuj06BF/Antminer-T9-PLUS-all-201711242319-autofreq-user-Update2UBI-NF.tar.gz


is the "FIXED"


as you can seen in firmwares/Antminer%20T9+ you need to change to firmwares/Antminer%20T%2B

Lunko11
newbie
Activity: 6
Merit: 0
Re: Antminer T9+ Problem I beg you to help. ( Fixed --- and fixed firmware url probl
February 09, 2018, 01:18:36 AM
#10
Quote from: Raymond_B on February 08, 2018, 03:43:03 PM
Quote from: Lunko11 on February 08, 2018, 03:49:53 AM
Thank you for all your help.

I did indeed f*ck up the firmware update, but after it did not reconnect for around 1 hour, I got worried, and I started looking at solutions.
What I failed to realise is that I have a T9+ model and the firmware was only for t9 model.

I have contacted bitmain support asking them for a solution, either releasing the firmware, or sending it to me.
If it will be send to me, I will upload it to the forum, for anyother retarded people like me.

Thank you for all your help.

Sorry if that came across as rude, but people need to SLOW DOWN and read. This forum has so much information, but folks come hear and ignore it and make the same mistakes over and over.

Hehe no problem, I agree it was an idiotic move. I did read a ton before trying to flash( obviously not enough), but I just never though I need to wait 1hour for the antminer to restore connection after server ip update.
Its my idiot fault for instantly trying to "fix" things.


Now there is nothing to do but wait for antminer to release their firmware on the website, its large enough that email wont recieve it I guess ( customer support said he could not send it ), i did make some mega.nz or google drive accounts for him to upload Cheesy incase he realise that waiting for bitmain before chinese newyear is gonna be a paaaain.
Will see.


EDIT2; Update :

Bitmain just released the firmware on their site https://shop.bitmain.com/support.htm?pid=007201802091434313565J4tI3p60644
But Im guessing they fcked something since the file is denied, while others newly uploaded work fine ( for V-version ). Anybody able to download it ?
Raymond_B
member
Activity: 504
Merit: 71
Just Getting Started...
Re: Antminer T9+ Problem I beg you to help. ( Fixed --- and fixed firmware url probl
February 08, 2018, 03:43:03 PM
#9
Quote from: Lunko11 on February 08, 2018, 03:49:53 AM
Thank you for all your help.

I did indeed f*ck up the firmware update, but after it did not reconnect for around 1 hour, I got worried, and I started looking at solutions.
What I failed to realise is that I have a T9+ model and the firmware was only for t9 model.

I have contacted bitmain support asking them for a solution, either releasing the firmware, or sending it to me.
If it will be send to me, I will upload it to the forum, for anyother retarded people like me.

Thank you for all your help.

Sorry if that came across as rude, but people need to SLOW DOWN and read. This forum has so much information, but folks come hear and ignore it and make the same mistakes over and over.
Lunko11
newbie
Activity: 6
Merit: 0
Re: Antminer T9+ Problem I beg you to help. ( Fixed --- and fixed firmware url probl
February 08, 2018, 03:49:53 AM
#8
Thank you for all your help.

I did indeed f*ck up the firmware update, but after it did not reconnect for around 1 hour, I got worried, and I started looking at solutions.
What I failed to realise is that I have a T9+ model and the firmware was only for t9 model.

I have contacted bitmain support asking them for a solution, either releasing the firmware, or sending it to me.
If it will be send to me, I will upload it to the forum, for anyother retarded people like me.

Thank you for all your help.
Raymond_B
member
Activity: 504
Merit: 71
Just Getting Started...
Re: Antminer T9+ Problem I beg you to help. ( Fixed --- and fixed firmware url probl
February 07, 2018, 10:33:38 PM
#7
Quote from: Lunko11 on February 07, 2018, 05:14:48 PM
I have tried all 3 resets described on that page. Nothing worked so far.
While the ip report does give me the starting wokers and pools from antminer te problem does not go away nor does the firmware

Like mentioned factory reset doesn't flash the firmware back. You need to contact Bitmain.

I really, really, really, wish people would stop kneejerk firmware flashing...
Lunko11
newbie
Activity: 6
Merit: 0
Re: Antminer T9+ Problem I beg you to help. ( Fixed --- and fixed firmware url probl
February 07, 2018, 05:14:48 PM
#6
I have tried all 3 resets described on that page. Nothing worked so far.
While the ip report does give me the starting wokers and pools from antminer te problem does not go away nor does the firmware
Yrth
member
Activity: 123
Merit: 21
Re: Antminer T9+ Problem I beg you to help. ( Fixed --- and fixed firmware url probl
February 07, 2018, 05:06:08 PM
#5
You're best bet is to contact bitmain's support and ask them to either publicly post the T9+ firmware on their website for download or have them send it you.

Another option is to try the "ip reporter restore" method described here. https://enforum.bitmain.com/bbs/topics/3957
This was written before the T9+ was produced, so I don't know if it will work on that model. If you do try this and it works, please post here.
fanatic26
hero member
Activity: 756
Merit: 560
Re: Antminer T9+ Problem I beg you to help. ( Fixed --- and fixed firmware url probl
February 07, 2018, 04:34:22 PM
#4
You cant backup the running firmware, all you can do is backup the running settings. What makes you think you have a successful backup of the T9+ firmware?

Im guessing you are screwed until there is a publicly available T9+ firmware out.
Lunko11
newbie
Activity: 6
Merit: 0
Re: Antminer T9+ Problem I beg you to help. ( Fixed --- and fixed firmware url probl
February 07, 2018, 04:32:43 PM
#3
Quote from: Yrth on February 07, 2018, 04:21:52 PM
Did you change the firmware and possibly load T9 firmware onto the T9+? Because the kernel log you posted is from the T9 not the T9+. The T9+ has 9 chains of 18 chips. T9 has 3 chains of 57 chips, which is what your kernel log shows it is trying to find but can't.


hello i did do that yes :F but i have since factory reseted the machine plus i have restored the bacup from before i accidently put the firmware on..
 is there anything els i can do?

the official antminer site does  not have the antminer T9+ on their website ,so all i have is the factory reset or the bacup version.



or
Yrth
member
Activity: 123
Merit: 21
Re: Antminer T9+ Problem I beg you to help. ( Fixed --- and fixed firmware url probl
February 07, 2018, 04:21:52 PM
#2
Did you change the firmware and possibly load T9 firmware onto the T9+? Because the kernel log you posted is from the T9 not the T9+. The T9+ has 9 chains of 18 chips. T9 has 3 chains of 57 chips, which is what your kernel log shows it is trying to find but can't.
Lunko11
newbie
Activity: 6
Merit: 0
Re: Antminer T9+ Problem I beg you to help. ( Fixed --- and fixed firmware url probl
February 07, 2018, 03:28:27 PM
#1
Hello there, I am writing here since after 3 days of constant trying to fix it, I am broken, I am defeated. I am wondering if anybody has any idea what I could do. When I fight got it, it booted it up, and it worked instantly.. hashing at 60degress cellius on antmain server... after i tried my own pool it  didnt work anymore... and now it does not work whatever i do.

So I was always into gpu mining, but recently I decided to try some asic, and well I bought the new Antminer T9+ for "stability".

I have factory reseted it a gazilion times probably, I have bought a new PSU, new cable and nothing.

First of all let me say it takes around exactly an hour to grom from Hardware Version "erro connecting to"   finnaly Hardware Version   16.0.1.3 -- connected.
When it first happened i was like YEY its working, only to realise it was not hashing at all, and I do not mean hash broken I mean miner status not shown, I have 3 pools all says well connected or alive/dead and i see the fan speed, but thats about it, no chipy no nothing.

i really do not know what to do anymore, so I am turning to you guys.

( I have factory reseted it a couple of times, new psu, new eth cable, ( on the picture you see defoult settings workers from antmain ) , I did firmware upgrade as well only to realise that i have t9+ not t9 ( had original backup so , I have let it run for 5hours straight at one point too see if anything would work)

Its been 3-4 days... worst thing about this is each time i make a change waiting 1hour for the Hardware version to connect, to actually see if anything happens.


Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000308] ps7-ttc #0 at df804000, irq=43
[    0.000614] Console: colour dummy device 80x30
[    0.000645] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040205] pid_max: default: 32768 minimum: 301
[    0.040424] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040443] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042589] CPU: Testing write buffer coherency: ok
[    0.042917] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042977] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.043195] L310 cache controller enabled
[    0.043215] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121030] CPU1: Booted secondary processor
[    0.210225] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210356] Brought up 2 CPUs
[    0.210375] SMP: Total of 2 processors activated.
[    0.210384] CPU: All CPU(s) started in SVC mode.
[    0.211049] devtmpfs: initialized
[    0.213477] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214693] regulator-dummy: no parameters
[    0.221941] NET: Registered protocol family 16
[    0.224248] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226536] cpuidle: using governor ladder
[    0.226549] cpuidle: using governor menu
[    0.233915] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235429] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235443] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235556] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.257405] bio: create slab  at 0
[    0.258809] vgaarb: loaded
[    0.259512] SCSI subsystem initialized
[    0.260434] usbcore: registered new interface driver usbfs
[    0.260614] usbcore: registered new interface driver hub
[    0.260846] usbcore: registered new device driver usb
[    0.261602] media: Linux media interface: v0.10
[    0.261761] Linux video capture interface: v2.00
[    0.262003] pps_core: LinuxPPS API ver. 1 registered
[    0.262015] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.262143] PTP clock support registered
[    0.262494] EDAC MC: Ver: 3.0.0
[    0.263546] Advanced Linux Sound Architecture Driver Initialized.
[    0.266384] DMA-API: preallocated 4096 debug entries
[    0.266398] DMA-API: debugging enabled by kernel config
[    0.266478] Switched to clocksource arm_global_timer
[    0.287498] NET: Registered protocol family 2
[    0.288167] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.288224] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.288308] TCP: Hash tables configured (established 4096 bind 4096)
[    0.288357] TCP: reno registered
[    0.288374] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.288405] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.288642] NET: Registered protocol family 1
[    0.288992] RPC: Registered named UNIX socket transport module.
[    0.289004] RPC: Registered udp transport module.
[    0.289013] RPC: Registered tcp transport module.
[    0.289022] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.289035] PCI: CLS 0 bytes, default 64
[    0.289471] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291486] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.293612] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293800] msgmni has been set to 967
[    0.294572] io scheduler noop registered
[    0.294585] io scheduler deadline registered
[    0.294627] io scheduler cfq registered (default)
[    0.306423] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.306444] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.432550] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.999816] console [ttyPS0] enabled
[    1.004090] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.011715] [drm] Initialized drm 1.1.0 20060810
[    1.028780] brd: module loaded
[    1.038157] loop: module loaded
[    1.047957] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.053710] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.061805] libphy: XEMACPS mii bus: probed
[    1.066175] ------------- phy_id = 0x3625e62
[    1.071104] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.079706] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.086322] ehci-pci: EHCI PCI platform driver
[    1.093554] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.100405] usbcore: registered new interface driver usb-storage
[    1.107258] mousedev: PS/2 mouse device common for all mice
[    1.113350] i2c /dev entries driver
[    1.120272] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.125755] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.131671] Xilinx Zynq CpuIdle Driver started
[    1.136559] sdhci: Secure Digital Host Controller Interface driver
[    1.142653] sdhci: Copyright(c) Pierre Ossman
[    1.147093] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.153814] mmc0: no vqmmc regulator found
[    1.157855] mmc0: no vmmc regulator found
[    1.196535] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205222] usbcore: registered new interface driver usbhid
[    1.210736] usbhid: USB HID core driver
[    1.215449] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.221752] nand: Micron MT29F2G08ABAEAWP
[    1.225715] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.231656] Bad block table found at page 131008, version 0x01
[    1.237882] Bad block table found at page 130944, version 0x01
[    1.243935] 3 ofpart partitions found on MTD device pl353-nand
[    1.249729] Creating 3 MTD partitions on "pl353-nand":
[    1.254806] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.262874] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270186] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.279154] TCP: cubic registered
[    1.282388] NET: Registered protocol family 17
[    1.287109] Registering SWP/SWPB emulation handler
[    1.292994] regulator-dummy: disabling
[    1.297383] UBI: attaching mtd1 to ubi0
[    1.605196] UBI: scanning is finished
[    1.625559] UBI: volume 0 ("rootfs") re-sized from 192 to 1108 LEBs
[    1.632666] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.639743] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.646510] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.653170] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.660047] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.666016] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.673146] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 40244519
[    1.682005] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.691221] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.691226] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.695142] ALSA device list:
[    1.695145]   No soundcards found.
[    1.713679] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.785253] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.791204] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.800309] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    1.810197] UBIFS: reserved for root: 0 bytes (0 KiB)
[    1.815226] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D40982C6-E2F1-47EC-B21D-1B00F21DDB2A, small LPT model
[    1.868797] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    1.920812] devtmpfs: mounted
[    1.923916] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    3.088004] random: dd urandom read with 0 bits of entropy available
[    3.706529] 
[    3.706529] bcm54xx_config_init
[    4.486497] 
[    4.486497] bcm54xx_config_init
[    8.487348] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    8.493454] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   25.140776] In axi fpga driver!
[   25.143847] request_mem_region OK!
[   25.147271] AXI fpga dev virtual address is 0xdf9fc000
[   25.152345] *base_vir_addr = 0xc510
[   25.167641] In fpga mem driver!
[   25.170711] request_mem_region OK!
[   25.174275] fpga mem virtual address is 0xe2000000
[   25.946503] 
[   25.946503] bcm54xx_config_init
[   26.576506] 
[   26.576506] bcm54xx_config_init
[   30.577347] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   30.583455] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 2214.215436] random: nonblocking pool is initialized
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=0000c510
Miner Type = T9
AsicType = 1387
real AsicNum = 57
use critical mode to search freq...
get PLUG ON=0x0000000e
Find hashboard on Chain[1]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
set_reset_allhashboard = 0x0000ffff
Check chain[1] PIC fw version=0x00
chain[1] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
After restore: chain[1] PIC fw version=0x00
chain[1] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
After restore: chain[1] PIC fw version=0x00
Check chain[2] PIC fw version=0x00
chain[2] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
After restore: chain[2] PIC fw version=0x00
chain[2] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
After restore: chain[2] PIC fw version=0x00
Check chain[3] PIC fw version=0x00
chain[3] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
After restore: chain[3] PIC fw version=0x00
chain[3] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
After restore: chain[3] PIC fw version=0x00
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[1]
chain[1] has no freq in PIC! Will use default freq=550 and jump over...
Check chain[1] PIC fw version=0x00
chain[1] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
After restore: chain[1] PIC fw version=0x00
chain[1] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
After restore: chain[1] PIC fw version=0x00
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[2]
chain[2] has no freq in PIC! Will use default freq=550 and jump over...
Check chain[2] PIC fw version=0x00
chain[2] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
After restore: chain[2] PIC fw version=0x00
chain[2] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
After restore: chain[2] PIC fw version=0x00
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[3]
chain[3] has no freq in PIC! Will use default freq=550 and jump over...
Check chain[3] PIC fw version=0x00
chain[3] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
After restore: chain[3] PIC fw version=0x00
chain[3] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
After restore: chain[3] PIC fw version=0x00
get PIC voltage=0 on chain[1], value=970
get PIC voltage=0 on chain[2], value=970
get PIC voltage=0 on chain[3], value=970
set_reset_allhashboard = 0x00000000
chain[1] temp offset record: 0,0,0,0,0,0,0,0
chain[2] temp offset record: 0,0,0,0,0,0,0,0
chain[3] temp offset record: 0,0,0,0,0,0,0,0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 3, total chain num = 3 
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
Start bmminer ...
Detect 512MB control board of XILINX
Miner Type = T9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[1]
Check chain[1] PIC fw version=0x00
chain[1] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
After restore: chain[1] PIC fw version=0x00
chain[1] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[1]
After restore: chain[1] PIC fw version=0x00
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[2]
Check chain[2] PIC fw version=0x00
chain[2] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
After restore: chain[2] PIC fw version=0x00
chain[2] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[2]
After restore: chain[2] PIC fw version=0x00
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[3]
Check chain[3] PIC fw version=0x00
chain[3] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
After restore: chain[3] PIC fw version=0x00
chain[3] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[3]
After restore: chain[3] PIC fw version=0x00
Chain[J2] orignal chain_voltage_pic=0 value=970
Chain[J3] orignal chain_voltage_pic=0 value=970
Chain[J4] orignal chain_voltage_pic=0 value=970
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J2] has 0 asic
set_reset_hashboard = 0x00000002
set_reset_hashboard = 0x00000000
retry Chain[J2] has 0 asic
set_reset_hashboard = 0x00000002
set_reset_hashboard = 0x00000000
retry Chain[J2] has 0 asic
set_reset_hashboard = 0x00000002
set_reset_hashboard = 0x00000000
retry Chain[J2] has 0 asic
set_reset_hashboard = 0x00000002
set_reset_hashboard = 0x00000000
retry Chain[J2] has 0 asic
set_reset_hashboard = 0x00000002
set_reset_hashboard = 0x00000000
retry Chain[J2] has 0 asic
set_reset_hashboard = 0x00000002
set_reset_hashboard = 0x00000000
retry Chain[J2] has 0 asic
Chain[J3] has 0 asic
set_reset_hashboard = 0x00000004
set_reset_hashboard = 0x00000000
retry Chain[J3] has 0 asic
set_reset_hashboard = 0x00000004
set_reset_hashboard = 0x00000000
retry Chain[J3] has 0 asic
set_reset_hashboard = 0x00000004
set_reset_hashboard = 0x00000000
retry Chain[J3] has 0 asic
set_reset_hashboard = 0x00000004
set_reset_hashboard = 0x00000000
retry Chain[J3] has 0 asic
set_reset_hashboard = 0x00000004
set_reset_hashboard = 0x00000000
retry Chain[J3] has 0 asic
set_reset_hashboard = 0x00000004
set_reset_hashboard = 0x00000000
retry Chain[J3] has 0 asic
Chain[J4] has 0 asic
set_reset_hashboard = 0x00000008
set_reset_hashboard = 0x00000000
retry Chain[J4] has 0 asic
set_reset_hashboard = 0x00000008
set_reset_hashboard = 0x00000000
retry Chain[J4] has 0 asic
set_reset_hashboard = 0x00000008
set_reset_hashboard = 0x00000000
retry Chain[J4] has 0 asic
set_reset_hashboard = 0x00000008
set_reset_hashboard = 0x00000000
retry Chain[J4] has 0 asic
set_reset_hashboard = 0x00000008
set_reset_hashboard = 0x00000000
retry Chain[J4] has 0 asic
set_reset_hashboard = 0x00000008
set_reset_hashboard = 0x00000000
retry Chain[J4] has 0 asic
miner total rate=0GH/s fixed rate=0GH/s

Miner fix freq ...
max freq = 100
set baud=16
do heat board 8xPatten for 1 times
Check voltage total rate=0
setStartTimePoint total_tv_start_sys=6712 total_tv_end_sys=6713
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
set FAN speed according to: temp_highest=0 temp_top1[PWM_T]=0 temp_top1[TEMP_POS_LOCAL]=0 temp_change=0 fix_fan_steps=0
set full FAN speed...
FAN PWM: 100
read_temp_func Done!
CRC error counter=0


and well http://shrani.si/f/n/cs/p0D9O8O/bitcointalk.png




EDIT : Incase somebody will be stupid enough like me and need the T9+ Firmware

Fixed the problem

The URL of the firmware is written incorrectly


https://file.bitmain.com/shop-file-server/firmwares/Antminer%20T9+/Firmware/00720180209143644817e9j6NQuj06BF/Antminer-T9-PLUS-all-201711242319-autofreq-user-Update2UBI-NF.tar.gz

is the original url

https://file.bitmain.com/shop-file-server/firmwares/Antminer%20T9%2B/Firmware/00720180209143644817e9j6NQuj06BF/Antminer-T9-PLUS-all-201711242319-autofreq-user-Update2UBI-NF.tar.gz


is the "FIXED"


as you can seen in firmwares/Antminer%20T9+ you need to change to firmwares/Antminer%20T%2B
Bitcoin Forum>Bitcoin>Mining>Mining support
Jump to: